{"id":{"repo_id":"uiuc","oai_identifier":"oai:www.ideals.illinois.edu:2142/17067"},"canonical_url":"https://search.dev.ndltd.org/etd/uiuc/oai:www.ideals.illinois.edu:2142/17067","repository":{"repo_id":"uiuc","name":"University of Illinois - Urbana-Champaign","base_url":"https://www.ideals.illinois.edu/oai-pmh"},"display":{"title":"Machine tool chatter suppression using spindle speed variation","abstract":"First part of the thesis deals with the dynamics and stability of nonlinear delay gyroscopic systems with periodically varying delay. The aim is to demonstrate that greater depths of cut may be achieved in a boring process (2 DOF) when the speed of the spindle is modulated sinusoidally instead of being kept constant. Since the variation of spindle speed is small and independent of the tool motion, by expanding the delay terms about a finite mean delay and augmenting the system, the time dependent delay system can be written as a state dependent delay system. The augmented system of equations is autonomous and has two pairs of pure imaginary eigenvalues without resonance. The center manifold and normal form methods are then used to obtain an approximate and simpler four dimensional system. Analysis of this simpler system shows that periodic variations in the delay lead to larger stability boundaries. In [1], the authors present asymptotic expansion for the top Lyapunov exponent of a scalar linear delay differential equation driven by a two state Markov process. We extend their result to a vector case. In the case when driving noise is small, we construct an asymptotic expansion for the top Lyapunov exponent, which determines the almost-sure stability of the system. In [2] authors present a technique to suppress chatter, where spindle speed is varied as piecewise constant uniform noise. Using the results of vector case, we attempt to see whether stabilization can be achieved by varying spindle speed as a two state Markov chain. We find that the noise considered has destabilizing effect.","abstract_html":"First part of the thesis deals with the dynamics and stability of nonlinear delay gyroscopic systems with periodically varying delay. The aim is to demonstrate that greater depths of cut may be achieved in a boring process (2 DOF) when the speed of the spindle is modulated sinusoidally instead of being kept constant. Since the variation of spindle speed is small and independent of the tool motion, by expanding the delay terms about a finite mean delay and augmenting the system, the time dependent delay system can be written as a state dependent delay system. The augmented system of equations is autonomous and has two pairs of pure imaginary eigenvalues without resonance. The center manifold and normal form methods are then used to obtain an approximate and simpler four dimensional system. Analysis of this simpler system shows that periodic variations in the delay lead to larger stability boundaries. In [1], the authors present asymptotic expansion for the top Lyapunov exponent of a scalar linear delay differential equation driven by a two state Markov process. We extend their result to a vector case. In the case when driving noise is small, we construct an asymptotic expansion for the top Lyapunov exponent, which determines the almost-sure stability of the system. In [2] authors present a technique to suppress chatter, where spindle speed is varied as piecewise constant uniform noise. Using the results of vector case, we attempt to see whether stabilization can be achieved by varying spindle speed as a two state Markov chain. We find that the noise considered has destabilizing effect.","abstract_has_math":false,"creators":["Lingala, Nishanth"],"institution":"University of Illinois at Urbana-Champaign","degree_name":"M.S.","degree_level":"Thesis","degree_discipline":"Aerospace Engineering","degree_department":null,"school":null,"contributors":["Namachchivaya, N. Sri"],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2010,"date_issued":"2010-08-31T20:31:17Z","date_published":"2010-08-31T20:31:17Z","updated_at":"2026-07-22T22:25:09Z","subjects":["Chatter suppression","Spindle Speed Variation","Gyroscopic system","delay differential equation","asymptotic expansion of Top Lyapunov exponent"],"languages":["en"],"rights":["Copyright 2010 Nishanth Lingala"],"rights_urls":[],"identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/2142/17067","outbound_label":"Handle","outbound_source":"dc:identifier"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Namachchivaya, N. Sri"]},{"key":"dc:creator","label":"Author","values":["Lingala, Nishanth"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2010-08-31T20:31:17Z","2012-09-07T16:43:40Z","2010-08"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Aerospace Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Thesis"]},{"key":"thesis:degree_name","label":"Degree Name","values":["M.S."]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["University of Illinois at Urbana-Champaign"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Chatter suppression","Spindle Speed Variation","Gyroscopic system","delay differential equation","asymptotic expansion of Top Lyapunov exponent"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language","label":"Dc Language","values":["en"]},{"key":"dc:rights","label":"Dc Rights","values":["Copyright 2010 Nishanth Lingala"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["http://hdl.handle.net/2142/17067"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description","label":"Description","values":["First part of the thesis deals with the dynamics and stability of nonlinear delay gyroscopic systems with periodically varying delay. The aim is to demonstrate that greater depths of cut may be achieved in a boring process (2 DOF) when the speed of the spindle is modulated sinusoidally instead of being kept constant. Since the variation of spindle speed is small and independent of the tool motion, by expanding the delay terms about a finite mean delay and augmenting the system, the time dependent delay system can be written as a state dependent delay system. The augmented system of equations is autonomous and has two pairs of pure imaginary eigenvalues without resonance. The center manifold and normal form methods are then used to obtain an approximate and simpler four dimensional system. Analysis of this simpler system shows that periodic variations in the delay lead to larger stability boundaries. In [1], the authors present asymptotic expansion for the top Lyapunov exponent of a scalar linear delay differential equation driven by a two state Markov process. We extend their result to a vector case. In the case when driving noise is small, we construct an asymptotic expansion for the top Lyapunov exponent, which determines the almost-sure stability of the system. In [2] authors present a technique to suppress chatter, where spindle speed is varied as piecewise constant uniform noise. Using the results of vector case, we attempt to see whether stabilization can be achieved by varying spindle speed as a two state Markov chain. We find that the noise considered has destabilizing effect.","Item withdrawn by Mark Zulauf (zulauf@illinois.edu) on 2010-07-19T18:56:13Z Item was in collections: University of Illinois Theses & Dissertations (ID: 1) No. of bitstreams: 1 lingala_nishanth.pdf: 879929 bytes, checksum: b84eb51640952c38d3d2cb813e0154b6 (MD5)","Made available in DSpace on 2010-08-31T20:31:17Z (GMT). No. of bitstreams: 3 lingala_nishanth.pdf: 879929 bytes, checksum: b84eb51640952c38d3d2cb813e0154b6 (MD5) 1_lingala_nishanth.pdf: 879932 bytes, checksum: 78ac3dd194862eed3689ff1d21b29943 (MD5) license.txt: 4066 bytes, checksum: 26b25a3a8f3f49c064779866aad13938 (MD5)","Item marked as restricted to the 'Administrator' Group (id=1) by William Ingram (wingram2@illinois.edu) on 2010-08-31T20:32:57Z Item is restricted until 2012-08-31T20:32:49Z","Item reinstated by Sarah Shreeves (sshreeve@illinois.edu) on 2012-09-07T16:43:40Z Item was in collections: University of Illinois Dissertations and Theses (ID: 204) Dissertations and Theses - Aerospace Engineering (ID: 682) No. of bitstreams: 4 lingala_nishanth.pdf: 879929 bytes, checksum: b84eb51640952c38d3d2cb813e0154b6 (MD5) 1_lingala_nishanth.pdf: 879932 bytes, checksum: 78ac3dd194862eed3689ff1d21b29943 (MD5) license.txt: 4066 bytes, checksum: 26b25a3a8f3f49c064779866aad13938 (MD5) 1_lingala_nishanth.pdf.txt: 128236 bytes, checksum: 1735a949151039006a5fe62900da5a86 (MD5)","Item released from any restrictions by Sarah Shreeves (sshreeve@illinois.edu) on 2012-09-07T16:43:40Z"]},{"key":"dc:title","label":"Title","values":["Machine tool chatter suppression using spindle speed variation"]}]}],"canonical_facts":{"dc:contributor":["Namachchivaya, N. Sri"],"dc:creator":["Lingala, Nishanth"],"dc:date":["2010-08-31T20:31:17Z","2012-09-07T16:43:40Z","2010-08"],"dc:description":["First part of the thesis deals with the dynamics and stability of nonlinear delay gyroscopic systems with periodically varying delay. The aim is to demonstrate that greater depths of cut may be achieved in a boring process (2 DOF) when the speed of the spindle is modulated sinusoidally instead of being kept constant. Since the variation of spindle speed is small and independent of the tool motion, by expanding the delay terms about a finite mean delay and augmenting the system, the time dependent delay system can be written as a state dependent delay system. The augmented system of equations is autonomous and has two pairs of pure imaginary eigenvalues without resonance. The center manifold and normal form methods are then used to obtain an approximate and simpler four dimensional system. Analysis of this simpler system shows that periodic variations in the delay lead to larger stability boundaries. In [1], the authors present asymptotic expansion for the top Lyapunov exponent of a scalar linear delay differential equation driven by a two state Markov process. We extend their result to a vector case. In the case when driving noise is small, we construct an asymptotic expansion for the top Lyapunov exponent, which determines the almost-sure stability of the system. In [2] authors present a technique to suppress chatter, where spindle speed is varied as piecewise constant uniform noise. Using the results of vector case, we attempt to see whether stabilization can be achieved by varying spindle speed as a two state Markov chain. We find that the noise considered has destabilizing effect.","Item withdrawn by Mark Zulauf (zulauf@illinois.edu) on 2010-07-19T18:56:13Z Item was in collections: University of Illinois Theses & Dissertations (ID: 1) No. of bitstreams: 1 lingala_nishanth.pdf: 879929 bytes, checksum: b84eb51640952c38d3d2cb813e0154b6 (MD5)","Made available in DSpace on 2010-08-31T20:31:17Z (GMT). No. of bitstreams: 3 lingala_nishanth.pdf: 879929 bytes, checksum: b84eb51640952c38d3d2cb813e0154b6 (MD5) 1_lingala_nishanth.pdf: 879932 bytes, checksum: 78ac3dd194862eed3689ff1d21b29943 (MD5) license.txt: 4066 bytes, checksum: 26b25a3a8f3f49c064779866aad13938 (MD5)","Item marked as restricted to the 'Administrator' Group (id=1) by William Ingram (wingram2@illinois.edu) on 2010-08-31T20:32:57Z Item is restricted until 2012-08-31T20:32:49Z","Item reinstated by Sarah Shreeves (sshreeve@illinois.edu) on 2012-09-07T16:43:40Z Item was in collections: University of Illinois Dissertations and Theses (ID: 204) Dissertations and Theses - Aerospace Engineering (ID: 682) No. of bitstreams: 4 lingala_nishanth.pdf: 879929 bytes, checksum: b84eb51640952c38d3d2cb813e0154b6 (MD5) 1_lingala_nishanth.pdf: 879932 bytes, checksum: 78ac3dd194862eed3689ff1d21b29943 (MD5) license.txt: 4066 bytes, checksum: 26b25a3a8f3f49c064779866aad13938 (MD5) 1_lingala_nishanth.pdf.txt: 128236 bytes, checksum: 1735a949151039006a5fe62900da5a86 (MD5)","Item released from any restrictions by Sarah Shreeves (sshreeve@illinois.edu) on 2012-09-07T16:43:40Z"],"dc:identifier":["http://hdl.handle.net/2142/17067"],"dc:language":["en"],"dc:rights":["Copyright 2010 Nishanth Lingala"],"dc:subject":["Chatter suppression","Spindle Speed Variation","Gyroscopic system","delay differential equation","asymptotic expansion of Top Lyapunov exponent"],"dc:title":["Machine tool chatter suppression using spindle speed variation"],"thesis:degree_discipline":["Aerospace Engineering"],"thesis:degree_level":["Thesis"],"thesis:degree_name":["M.S."],"thesis:institution_name":["University of Illinois at Urbana-Champaign"]},"updated_at":"2026-07-22T22:25:09Z"}