{"id":{"repo_id":"uiuc","oai_identifier":"oai:www.ideals.illinois.edu:2142/16495"},"canonical_url":"https://search.dev.ndltd.org/etd/uiuc/oai:www.ideals.illinois.edu:2142/16495","repository":{"repo_id":"uiuc","name":"University of Illinois - Urbana-Champaign","base_url":"https://www.ideals.illinois.edu/oai-pmh"},"display":{"title":"Simulations of thermophoretic deposition in wavy channels","abstract":"The use of exhaust gas recirculation coolers is important for minimization of harmful NOx emissions from large diesel engines. But the use of the soot filled exhaust leads to the deposition of particles on the fins of the EGR cooler. So it is important to understand the soot deposition mechanisms and geometry effects in order to design an efficient fin geometry that minimizes soot deposition. This study developed a fully implicit code with variable property consideration and boundary fitter coordinates to model the fluid flow, heat transfer, and soot deposition in wavy channels. The code was then used to study laminar and turbulent flow with Reynolds numbers ranging from 300 to 10,000. The inlet fluid temperature was held at 750 K and the wall temperature was varied from 300 K to 750 K. The first set of results is for laminar flow in a wavy channel. Three Reynolds numbers and four wall temperatures were studied for a single wavy geometry. The pressure drop, heat transfer, and soot deposition were predicted for all cases and trends are described. Then the effect of geometry on the pressure drop, heat transfer, and soot deposition in a laminar flow is studied. This is done by comparing the wavy channel results with planar channel results for one Reynolds number and three different wall temperatures. The second set of results is for turbulent flow in a wavy channel. Once again three Reynolds numbers and four wall temperatures were studied. Trends for the pressure drop, heat transfer, and soot deposition are described. Then once again the wavy channel results are compared with planar channel results to illustrate the effect of geometry.","abstract_html":"The use of exhaust gas recirculation coolers is important for minimization of harmful NOx emissions from large diesel engines. But the use of the soot filled exhaust leads to the deposition of particles on the fins of the EGR cooler. So it is important to understand the soot deposition mechanisms and geometry effects in order to design an efficient fin geometry that minimizes soot deposition. This study developed a fully implicit code with variable property consideration and boundary fitter coordinates to model the fluid flow, heat transfer, and soot deposition in wavy channels. The code was then used to study laminar and turbulent flow with Reynolds numbers ranging from 300 to 10,000. The inlet fluid temperature was held at 750 K and the wall temperature was varied from 300 K to 750 K. The first set of results is for laminar flow in a wavy channel. Three Reynolds numbers and four wall temperatures were studied for a single wavy geometry. The pressure drop, heat transfer, and soot deposition were predicted for all cases and trends are described. Then the effect of geometry on the pressure drop, heat transfer, and soot deposition in a laminar flow is studied. This is done by comparing the wavy channel results with planar channel results for one Reynolds number and three different wall temperatures. The second set of results is for turbulent flow in a wavy channel. Once again three Reynolds numbers and four wall temperatures were studied. Trends for the pressure drop, heat transfer, and soot deposition are described. Then once again the wavy channel results are compared with planar channel results to illustrate the effect of geometry.","abstract_has_math":false,"creators":["Strebel, Kirk A."],"institution":"University of Illinois at Urbana-Champaign","degree_name":"M.S.","degree_level":"Thesis","degree_discipline":"Mechanical Engineering","degree_department":null,"school":null,"contributors":["Vanka, Surya Pratap"],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2010,"date_issued":"2010-06-22T19:46:39Z","date_published":"2010-06-22T19:46:39Z","updated_at":"2026-07-22T22:25:09Z","subjects":["Thermophoresis","Wavy Channels","Computational fluid dynamics (CFD)","EGR Cooler","Exhaust Gas Recirculation (EGR)"],"languages":["en"],"rights":["Copyright 2010 Kirk A. Strebel"],"rights_urls":[],"identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/2142/16495","outbound_label":"Handle","outbound_source":"dc:identifier"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Vanka, Surya Pratap"]},{"key":"dc:creator","label":"Author","values":["Strebel, Kirk A."]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2010-06-22T19:46:39Z","2010-5"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Mechanical Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Thesis"]},{"key":"thesis:degree_name","label":"Degree Name","values":["M.S."]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["University of Illinois at Urbana-Champaign"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Thermophoresis","Wavy Channels","Computational fluid dynamics (CFD)","EGR Cooler","Exhaust Gas Recirculation (EGR)"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language","label":"Dc Language","values":["en"]},{"key":"dc:rights","label":"Dc Rights","values":["Copyright 2010 Kirk A. Strebel"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["http://hdl.handle.net/2142/16495"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description","label":"Description","values":["The use of exhaust gas recirculation coolers is important for minimization of harmful NOx emissions from large diesel engines. But the use of the soot filled exhaust leads to the deposition of particles on the fins of the EGR cooler. So it is important to understand the soot deposition mechanisms and geometry effects in order to design an efficient fin geometry that minimizes soot deposition. This study developed a fully implicit code with variable property consideration and boundary fitter coordinates to model the fluid flow, heat transfer, and soot deposition in wavy channels. The code was then used to study laminar and turbulent flow with Reynolds numbers ranging from 300 to 10,000. The inlet fluid temperature was held at 750 K and the wall temperature was varied from 300 K to 750 K. The first set of results is for laminar flow in a wavy channel. Three Reynolds numbers and four wall temperatures were studied for a single wavy geometry. The pressure drop, heat transfer, and soot deposition were predicted for all cases and trends are described. Then the effect of geometry on the pressure drop, heat transfer, and soot deposition in a laminar flow is studied. This is done by comparing the wavy channel results with planar channel results for one Reynolds number and three different wall temperatures. The second set of results is for turbulent flow in a wavy channel. Once again three Reynolds numbers and four wall temperatures were studied. Trends for the pressure drop, heat transfer, and soot deposition are described. Then once again the wavy channel results are compared with planar channel results to illustrate the effect of geometry.","Item withdrawn by Mark Zulauf (zulauf@illinois.edu) on 2010-04-27T17:40:42Z Item was in collections: University of Illinois Theses & Dissertations (ID: 1) No. of bitstreams: 1 Strebel_Kirk.pdf: 4038384 bytes, checksum: fbed4aedabfb6ac4b90edbb63fa6b4f6 (MD5)","Made available in DSpace on 2010-06-22T19:46:39Z (GMT). No. of bitstreams: 3 Strebel_Kirk.pdf: 4038384 bytes, checksum: fbed4aedabfb6ac4b90edbb63fa6b4f6 (MD5) 1_Strebel_Kirk.pdf: 4038429 bytes, checksum: c7cc4a301b5f6d7a0784314b6e4d1bb6 (MD5) license.txt: 4062 bytes, checksum: 52bc57ee676c963cbbb884e695b90349 (MD5)"]},{"key":"dc:title","label":"Title","values":["Simulations of thermophoretic deposition in wavy channels"]}]}],"canonical_facts":{"dc:contributor":["Vanka, Surya Pratap"],"dc:creator":["Strebel, Kirk A."],"dc:date":["2010-06-22T19:46:39Z","2010-5"],"dc:description":["The use of exhaust gas recirculation coolers is important for minimization of harmful NOx emissions from large diesel engines. But the use of the soot filled exhaust leads to the deposition of particles on the fins of the EGR cooler. So it is important to understand the soot deposition mechanisms and geometry effects in order to design an efficient fin geometry that minimizes soot deposition. This study developed a fully implicit code with variable property consideration and boundary fitter coordinates to model the fluid flow, heat transfer, and soot deposition in wavy channels. The code was then used to study laminar and turbulent flow with Reynolds numbers ranging from 300 to 10,000. The inlet fluid temperature was held at 750 K and the wall temperature was varied from 300 K to 750 K. The first set of results is for laminar flow in a wavy channel. Three Reynolds numbers and four wall temperatures were studied for a single wavy geometry. The pressure drop, heat transfer, and soot deposition were predicted for all cases and trends are described. Then the effect of geometry on the pressure drop, heat transfer, and soot deposition in a laminar flow is studied. This is done by comparing the wavy channel results with planar channel results for one Reynolds number and three different wall temperatures. The second set of results is for turbulent flow in a wavy channel. Once again three Reynolds numbers and four wall temperatures were studied. Trends for the pressure drop, heat transfer, and soot deposition are described. Then once again the wavy channel results are compared with planar channel results to illustrate the effect of geometry.","Item withdrawn by Mark Zulauf (zulauf@illinois.edu) on 2010-04-27T17:40:42Z Item was in collections: University of Illinois Theses & Dissertations (ID: 1) No. of bitstreams: 1 Strebel_Kirk.pdf: 4038384 bytes, checksum: fbed4aedabfb6ac4b90edbb63fa6b4f6 (MD5)","Made available in DSpace on 2010-06-22T19:46:39Z (GMT). No. of bitstreams: 3 Strebel_Kirk.pdf: 4038384 bytes, checksum: fbed4aedabfb6ac4b90edbb63fa6b4f6 (MD5) 1_Strebel_Kirk.pdf: 4038429 bytes, checksum: c7cc4a301b5f6d7a0784314b6e4d1bb6 (MD5) license.txt: 4062 bytes, checksum: 52bc57ee676c963cbbb884e695b90349 (MD5)"],"dc:identifier":["http://hdl.handle.net/2142/16495"],"dc:language":["en"],"dc:rights":["Copyright 2010 Kirk A. Strebel"],"dc:subject":["Thermophoresis","Wavy Channels","Computational fluid dynamics (CFD)","EGR Cooler","Exhaust Gas Recirculation (EGR)"],"dc:title":["Simulations of thermophoretic deposition in wavy channels"],"thesis:degree_discipline":["Mechanical Engineering"],"thesis:degree_level":["Thesis"],"thesis:degree_name":["M.S."],"thesis:institution_name":["University of Illinois at Urbana-Champaign"]},"updated_at":"2026-07-22T22:25:09Z"}