{"id":{"repo_id":"uiuc","oai_identifier":"oai:www.ideals.illinois.edu:2142/16074"},"canonical_url":"https://search.dev.ndltd.org/etd/uiuc/oai:www.ideals.illinois.edu:2142/16074","repository":{"repo_id":"uiuc","name":"University of Illinois - Urbana-Champaign","base_url":"https://www.ideals.illinois.edu/oai-pmh"},"display":{"title":"Pathways for quantum dot optoelectronics fabrication using soft nanoimprint lithography","abstract":"Nanoimprint lithography is a low-cost, high-throughput alternative to traditional serial nanolithography technologies. Here it is explored for application in the optoelectronics area. A variant of NIL using a flexible polymeric mold, termed “soft NIL” is used to create and study quantum dot arrays according to two concepts. In the first concept, a dense array of nano-sized holes are etched into a blank GaAs substrate. When a thin InAs quantum dot (QD) layer is grown on top, the QDs nucleate only at the locations of the holes, resulting in an array of site-controlled quantum dots. This concept shall be called “regrown QDs.” In the second concept, soft NIL is used to pattern an etch mask atop a sample consisting of an InP substrate topped by an InGaAs quantum well. Anisotropic dry etching is used to etch the sample down to the InP substrate to form an array of pillars, each containing a QD. For each concept, the morphology and optical performance are studied, and refinements are pursued to gain finer control over the morphology and brighter luminescence from the QDs. Finally, a plan is presented for incorporation of each concept into a double heterostructure layer design to yield a quantum dot laser.","abstract_html":"Nanoimprint lithography is a low-cost, high-throughput alternative to traditional serial nanolithography technologies. Here it is explored for application in the optoelectronics area. A variant of NIL using a flexible polymeric mold, termed “soft NIL” is used to create and study quantum dot arrays according to two concepts. In the first concept, a dense array of nano-sized holes are etched into a blank GaAs substrate. When a thin InAs quantum dot (QD) layer is grown on top, the QDs nucleate only at the locations of the holes, resulting in an array of site-controlled quantum dots. This concept shall be called “regrown QDs.” In the second concept, soft NIL is used to pattern an etch mask atop a sample consisting of an InP substrate topped by an InGaAs quantum well. Anisotropic dry etching is used to etch the sample down to the InP substrate to form an array of pillars, each containing a QD. For each concept, the morphology and optical performance are studied, and refinements are pursued to gain finer control over the morphology and brighter luminescence from the QDs. Finally, a plan is presented for incorporation of each concept into a double heterostructure layer design to yield a quantum dot laser.","abstract_has_math":false,"creators":["Meneou, Kevin J."],"institution":"University of Illinois at Urbana-Champaign","degree_name":"Ph.D.","degree_level":"Dissertation","degree_discipline":"Electrical & Computer Engr","degree_department":null,"school":null,"contributors":["Cheng, Keh-Yung","Hsieh, Kuang-Chien","Feng, Milton","Cunningham, Brian T."],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2010,"date_issued":"2010-05-19T18:34:02Z","date_published":"2010-05-19T18:34:02Z","updated_at":"2026-07-22T22:25:08Z","subjects":["Molecular beam epitaxy","Optoelectronics","Quantum dots","Nanoimprint lithography","Nanofabrication and microfabrication","Reactive ion etching"],"languages":["en"],"rights":["Copyright 2010 Kevin J. Meneou"],"rights_urls":[],"identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/2142/16074","outbound_label":"Handle","outbound_source":"dc:identifier"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Cheng, Keh-Yung","Hsieh, Kuang-Chien","Feng, Milton","Cunningham, Brian T."]},{"key":"dc:creator","label":"Author","values":["Meneou, Kevin J."]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2010-05-19T18:34:02Z","2010-5"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Electrical & Computer Engr"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Dissertation"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Ph.D."]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["University of Illinois at Urbana-Champaign"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Molecular beam epitaxy","Optoelectronics","Quantum dots","Nanoimprint lithography","Nanofabrication and microfabrication","Reactive ion etching"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language","label":"Dc Language","values":["en"]},{"key":"dc:rights","label":"Dc Rights","values":["Copyright 2010 Kevin J. Meneou"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["http://hdl.handle.net/2142/16074"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description","label":"Description","values":["Nanoimprint lithography is a low-cost, high-throughput alternative to traditional serial nanolithography technologies. Here it is explored for application in the optoelectronics area. A variant of NIL using a flexible polymeric mold, termed “soft NIL” is used to create and study quantum dot arrays according to two concepts. In the first concept, a dense array of nano-sized holes are etched into a blank GaAs substrate. When a thin InAs quantum dot (QD) layer is grown on top, the QDs nucleate only at the locations of the holes, resulting in an array of site-controlled quantum dots. This concept shall be called “regrown QDs.” In the second concept, soft NIL is used to pattern an etch mask atop a sample consisting of an InP substrate topped by an InGaAs quantum well. Anisotropic dry etching is used to etch the sample down to the InP substrate to form an array of pillars, each containing a QD. For each concept, the morphology and optical performance are studied, and refinements are pursued to gain finer control over the morphology and brighter luminescence from the QDs. Finally, a plan is presented for incorporation of each concept into a double heterostructure layer design to yield a quantum dot laser.","Item withdrawn by Alexis Thompson (athmpsn1@illinois.edu) on 2010-03-26T20:32:39Z Item was in collections: University of Illinois Theses & Dissertations (ID: 1) No. of bitstreams: 10 uiucthesisbib.bib: 54312 bytes, checksum: 1e9dfc556bf2c66fd429a2d966861c77 (MD5) snhabstract.tex: 1275 bytes, checksum: 74e31a4dd64f7897eae8a2be49ebfff7 (MD5) snhacknowledge.tex: 3127 bytes, checksum: 7ec18939757c23f24c1a86b768b0a89c (MD5) snhdedication.tex: 141 bytes, checksum: c0efa4ce9bb45a47620fe39ddeb77389 (MD5) kjmPhD.tex: 3006 bytes, checksum: 96954ba5a89a24f009c95ba3050a1154 (MD5) kjmintro.tex: 27744 bytes, checksum: d5d1d386a7b5e6655b47c630d989116e (MD5) kjmregrown.tex: 54688 bytes, checksum: 34ac45b905f43b37d867c57edc055a8d (MD5) kjmpillars.tex: 38599 bytes, checksum: 050924c23c151f2d38d826becd7c5ed0 (MD5) kjmconc.tex: 10125 bytes, checksum: 285aa3e3d4ff3778473b0cf59b6d5e4a (MD5) Meneou_Kevin.pdf: 23072085 bytes, checksum: d1172387505f85970e5697f6adfa914a (MD5)","Made available in DSpace on 2010-05-19T18:34:02Z (GMT). No. of bitstreams: 11 uiucthesisbib.bib: 54312 bytes, checksum: 1e9dfc556bf2c66fd429a2d966861c77 (MD5) snhabstract.tex: 1275 bytes, checksum: 74e31a4dd64f7897eae8a2be49ebfff7 (MD5) snhacknowledge.tex: 3127 bytes, checksum: 7ec18939757c23f24c1a86b768b0a89c (MD5) snhdedication.tex: 141 bytes, checksum: c0efa4ce9bb45a47620fe39ddeb77389 (MD5) kjmPhD.tex: 3006 bytes, checksum: 96954ba5a89a24f009c95ba3050a1154 (MD5) kjmintro.tex: 27744 bytes, checksum: d5d1d386a7b5e6655b47c630d989116e (MD5) kjmregrown.tex: 54688 bytes, checksum: 34ac45b905f43b37d867c57edc055a8d (MD5) kjmpillars.tex: 38599 bytes, checksum: 050924c23c151f2d38d826becd7c5ed0 (MD5) kjmconc.tex: 10125 bytes, checksum: 285aa3e3d4ff3778473b0cf59b6d5e4a (MD5) Meneou_Kevin.pdf: 23072085 bytes, checksum: d1172387505f85970e5697f6adfa914a (MD5) license.txt: 4060 bytes, checksum: 54d599beaa1883bfea0a882048ef1987 (MD5)"]},{"key":"dc:title","label":"Title","values":["Pathways for quantum dot optoelectronics fabrication using soft nanoimprint lithography"]}]}],"canonical_facts":{"dc:contributor":["Cheng, Keh-Yung","Hsieh, Kuang-Chien","Feng, Milton","Cunningham, Brian T."],"dc:creator":["Meneou, Kevin J."],"dc:date":["2010-05-19T18:34:02Z","2010-5"],"dc:description":["Nanoimprint lithography is a low-cost, high-throughput alternative to traditional serial nanolithography technologies. Here it is explored for application in the optoelectronics area. A variant of NIL using a flexible polymeric mold, termed “soft NIL” is used to create and study quantum dot arrays according to two concepts. In the first concept, a dense array of nano-sized holes are etched into a blank GaAs substrate. When a thin InAs quantum dot (QD) layer is grown on top, the QDs nucleate only at the locations of the holes, resulting in an array of site-controlled quantum dots. This concept shall be called “regrown QDs.” In the second concept, soft NIL is used to pattern an etch mask atop a sample consisting of an InP substrate topped by an InGaAs quantum well. Anisotropic dry etching is used to etch the sample down to the InP substrate to form an array of pillars, each containing a QD. For each concept, the morphology and optical performance are studied, and refinements are pursued to gain finer control over the morphology and brighter luminescence from the QDs. Finally, a plan is presented for incorporation of each concept into a double heterostructure layer design to yield a quantum dot laser.","Item withdrawn by Alexis Thompson (athmpsn1@illinois.edu) on 2010-03-26T20:32:39Z Item was in collections: University of Illinois Theses & Dissertations (ID: 1) No. of bitstreams: 10 uiucthesisbib.bib: 54312 bytes, checksum: 1e9dfc556bf2c66fd429a2d966861c77 (MD5) snhabstract.tex: 1275 bytes, checksum: 74e31a4dd64f7897eae8a2be49ebfff7 (MD5) snhacknowledge.tex: 3127 bytes, checksum: 7ec18939757c23f24c1a86b768b0a89c (MD5) snhdedication.tex: 141 bytes, checksum: c0efa4ce9bb45a47620fe39ddeb77389 (MD5) kjmPhD.tex: 3006 bytes, checksum: 96954ba5a89a24f009c95ba3050a1154 (MD5) kjmintro.tex: 27744 bytes, checksum: d5d1d386a7b5e6655b47c630d989116e (MD5) kjmregrown.tex: 54688 bytes, checksum: 34ac45b905f43b37d867c57edc055a8d (MD5) kjmpillars.tex: 38599 bytes, checksum: 050924c23c151f2d38d826becd7c5ed0 (MD5) kjmconc.tex: 10125 bytes, checksum: 285aa3e3d4ff3778473b0cf59b6d5e4a (MD5) Meneou_Kevin.pdf: 23072085 bytes, checksum: d1172387505f85970e5697f6adfa914a (MD5)","Made available in DSpace on 2010-05-19T18:34:02Z (GMT). No. of bitstreams: 11 uiucthesisbib.bib: 54312 bytes, checksum: 1e9dfc556bf2c66fd429a2d966861c77 (MD5) snhabstract.tex: 1275 bytes, checksum: 74e31a4dd64f7897eae8a2be49ebfff7 (MD5) snhacknowledge.tex: 3127 bytes, checksum: 7ec18939757c23f24c1a86b768b0a89c (MD5) snhdedication.tex: 141 bytes, checksum: c0efa4ce9bb45a47620fe39ddeb77389 (MD5) kjmPhD.tex: 3006 bytes, checksum: 96954ba5a89a24f009c95ba3050a1154 (MD5) kjmintro.tex: 27744 bytes, checksum: d5d1d386a7b5e6655b47c630d989116e (MD5) kjmregrown.tex: 54688 bytes, checksum: 34ac45b905f43b37d867c57edc055a8d (MD5) kjmpillars.tex: 38599 bytes, checksum: 050924c23c151f2d38d826becd7c5ed0 (MD5) kjmconc.tex: 10125 bytes, checksum: 285aa3e3d4ff3778473b0cf59b6d5e4a (MD5) Meneou_Kevin.pdf: 23072085 bytes, checksum: d1172387505f85970e5697f6adfa914a (MD5) license.txt: 4060 bytes, checksum: 54d599beaa1883bfea0a882048ef1987 (MD5)"],"dc:identifier":["http://hdl.handle.net/2142/16074"],"dc:language":["en"],"dc:rights":["Copyright 2010 Kevin J. Meneou"],"dc:subject":["Molecular beam epitaxy","Optoelectronics","Quantum dots","Nanoimprint lithography","Nanofabrication and microfabrication","Reactive ion etching"],"dc:title":["Pathways for quantum dot optoelectronics fabrication using soft nanoimprint lithography"],"thesis:degree_discipline":["Electrical & Computer Engr"],"thesis:degree_level":["Dissertation"],"thesis:degree_name":["Ph.D."],"thesis:institution_name":["University of Illinois at Urbana-Champaign"]},"updated_at":"2026-07-22T22:25:08Z"}