{"id":{"repo_id":"uiuc","oai_identifier":"oai:www.ideals.illinois.edu:2142/15998"},"canonical_url":"https://search.dev.ndltd.org/etd/uiuc/oai:www.ideals.illinois.edu:2142/15998","repository":{"repo_id":"uiuc","name":"University of Illinois - Urbana-Champaign","base_url":"https://www.ideals.illinois.edu/oai-pmh"},"display":{"title":"Palladium coated edge-emitting lasers for hydrogen sensing applications","abstract":"As gas prices continue to rise and fossil fuels pollute our environment, various alternative fuel sources are being actively pursued. Hydrogen shows considerable promise due to its virtually unlimited supply, energy conversion efficiency, and neutral impact on the environment. However, due to the flammability of hydrogen gas in concentrations as low as 4%, reliable sensors capable of detecting small concentrations of hydrogen with quick response times are a necessity. A novel type of hydrogen sensor utilizing a thin film of palladium deposited on the ridge of an edge-emitting laser has been designed and fabricated. This palladium film is well known to react to hydrogen, forming palladium hydride with optical properties dependent on the hydrogen concentration. This reaction yields a change in complex refractive index and thus also the laser’s output power. The advantages of these sensors are their small size, high sensitivity, wide dynamic range, inline integration, and scalability to arrays. These capabilities surpass most traditional optical sensors, which generally utilize fiber gratings, surface plasmon resonances, or surface reflectance. Although those methods can be effective, the edge-emitting laser sensors are easier to miniaturize, integrate, and array. This thesis is organized into four sections. First, a brief analysis of the rising importance of hydrogen energy sources and various hydrogen sensing mechanisms is presented, followed by an overview of the edge-emitting laser sensor in terms of device design and physical sensing properties. A detailed description of the associated fabrication process is given, along with its test setup. Finally, the device performance with regards to varying concentrations of hydrogen is analyzed, with suggestions for future work and improvements.","abstract_html":"As gas prices continue to rise and fossil fuels pollute our environment, various alternative fuel sources are being actively pursued. Hydrogen shows considerable promise due to its virtually unlimited supply, energy conversion efficiency, and neutral impact on the environment. However, due to the flammability of hydrogen gas in concentrations as low as 4%, reliable sensors capable of detecting small concentrations of hydrogen with quick response times are a necessity. A novel type of hydrogen sensor utilizing a thin film of palladium deposited on the ridge of an edge-emitting laser has been designed and fabricated. This palladium film is well known to react to hydrogen, forming palladium hydride with optical properties dependent on the hydrogen concentration. This reaction yields a change in complex refractive index and thus also the laser’s output power. The advantages of these sensors are their small size, high sensitivity, wide dynamic range, inline integration, and scalability to arrays. These capabilities surpass most traditional optical sensors, which generally utilize fiber gratings, surface plasmon resonances, or surface reflectance. Although those methods can be effective, the edge-emitting laser sensors are easier to miniaturize, integrate, and array. This thesis is organized into four sections. First, a brief analysis of the rising importance of hydrogen energy sources and various hydrogen sensing mechanisms is presented, followed by an overview of the edge-emitting laser sensor in terms of device design and physical sensing properties. A detailed description of the associated fabrication process is given, along with its test setup. Finally, the device performance with regards to varying concentrations of hydrogen is analyzed, with suggestions for future work and improvements.","abstract_has_math":false,"creators":["Griffin, Benjamin G."],"institution":"University of Illinois at Urbana-Champaign","degree_name":"M.S.","degree_level":"Thesis","degree_discipline":"Electrical & Computer Engr","degree_department":null,"school":null,"contributors":["Goddard, Lynford L."],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2010,"date_issued":"2010-05-18T18:55:37Z","date_published":"2010-05-18T18:55:37Z","updated_at":"2026-07-22T22:25:08Z","subjects":["Hydrogen","Hydrogen Sensing","Hydrogen Sensor","Palladium","Edge-Emitting Laser Sensor"],"languages":["en"],"rights":["Copyright 2010 Benjamin G. Griffin"],"rights_urls":[],"identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/2142/15998","outbound_label":"Handle","outbound_source":"dc:identifier"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Goddard, Lynford L."]},{"key":"dc:creator","label":"Author","values":["Griffin, Benjamin G."]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2010-05-18T18:55:37Z","2012-05-19T10:00:16Z","2010-5"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Electrical & Computer Engr"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Thesis"]},{"key":"thesis:degree_name","label":"Degree Name","values":["M.S."]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["University of Illinois at Urbana-Champaign"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Hydrogen","Hydrogen Sensing","Hydrogen Sensor","Palladium","Edge-Emitting Laser Sensor"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language","label":"Dc Language","values":["en"]},{"key":"dc:rights","label":"Dc Rights","values":["Copyright 2010 Benjamin G. Griffin"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["http://hdl.handle.net/2142/15998"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description","label":"Description","values":["As gas prices continue to rise and fossil fuels pollute our environment, various alternative fuel sources are being actively pursued. Hydrogen shows considerable promise due to its virtually unlimited supply, energy conversion efficiency, and neutral impact on the environment. However, due to the flammability of hydrogen gas in concentrations as low as 4%, reliable sensors capable of detecting small concentrations of hydrogen with quick response times are a necessity. A novel type of hydrogen sensor utilizing a thin film of palladium deposited on the ridge of an edge-emitting laser has been designed and fabricated. This palladium film is well known to react to hydrogen, forming palladium hydride with optical properties dependent on the hydrogen concentration. This reaction yields a change in complex refractive index and thus also the laser’s output power. The advantages of these sensors are their small size, high sensitivity, wide dynamic range, inline integration, and scalability to arrays. These capabilities surpass most traditional optical sensors, which generally utilize fiber gratings, surface plasmon resonances, or surface reflectance. Although those methods can be effective, the edge-emitting laser sensors are easier to miniaturize, integrate, and array. This thesis is organized into four sections. First, a brief analysis of the rising importance of hydrogen energy sources and various hydrogen sensing mechanisms is presented, followed by an overview of the edge-emitting laser sensor in terms of device design and physical sensing properties. A detailed description of the associated fabrication process is given, along with its test setup. Finally, the device performance with regards to varying concentrations of hydrogen is analyzed, with suggestions for future work and improvements.","Item withdrawn by Mark Zulauf (zulauf@illinois.edu) on 2010-04-30T17:45:00Z Item was in collections: University of Illinois Theses & Dissertations (ID: 1) No. of bitstreams: 2 Griffin_Benjamin.docx: 6431952 bytes, checksum: 0bce143152b5a8b22c8407b6f42b5874 (MD5) Griffin_Benjamin.pdf: 1148226 bytes, checksum: 63a8afd30ffa49240d69bb508b8390ac (MD5)","Made available in DSpace on 2010-05-18T18:55:37Z (GMT). No. of bitstreams: 3 Griffin_Benjamin.docx: 6431952 bytes, checksum: 0bce143152b5a8b22c8407b6f42b5874 (MD5) Griffin_Benjamin.pdf: 1148226 bytes, checksum: 63a8afd30ffa49240d69bb508b8390ac (MD5) license.txt: 4066 bytes, checksum: 9e412702da33b830672752c1de4182d0 (MD5)","Item marked as restricted to the 'Administrator' Group (id=1) by William Ingram (wingram2@illinois.edu) on 2010-05-18T18:56:43Z Item is restricted until 2012-05-18T18:56:42Z","Item reinstated by Sarah Shreeves (sshreeve@illinois.edu) on 2012-05-19T10:00:16Z Item was in collections: Dissertations and Theses - Electrical and Computer Engineering (ID: 446) University of Illinois Dissertations and Theses (ID: 204) No. of bitstreams: 4 Griffin_Benjamin.pdf.txt: 75818 bytes, checksum: 26d069b7d0b11abb0dbaf72ee05a9fc3 (MD5) Griffin_Benjamin.docx: 6431952 bytes, checksum: 0bce143152b5a8b22c8407b6f42b5874 (MD5) Griffin_Benjamin.pdf: 1148226 bytes, checksum: 63a8afd30ffa49240d69bb508b8390ac (MD5) license.txt: 4066 bytes, checksum: 9e412702da33b830672752c1de4182d0 (MD5)","Item released from any restrictions by Sarah Shreeves (sshreeve@illinois.edu) on 2012-05-19T10:00:16Z"]},{"key":"dc:title","label":"Title","values":["Palladium coated edge-emitting lasers for hydrogen sensing applications"]}]}],"canonical_facts":{"dc:contributor":["Goddard, Lynford L."],"dc:creator":["Griffin, Benjamin G."],"dc:date":["2010-05-18T18:55:37Z","2012-05-19T10:00:16Z","2010-5"],"dc:description":["As gas prices continue to rise and fossil fuels pollute our environment, various alternative fuel sources are being actively pursued. Hydrogen shows considerable promise due to its virtually unlimited supply, energy conversion efficiency, and neutral impact on the environment. However, due to the flammability of hydrogen gas in concentrations as low as 4%, reliable sensors capable of detecting small concentrations of hydrogen with quick response times are a necessity. A novel type of hydrogen sensor utilizing a thin film of palladium deposited on the ridge of an edge-emitting laser has been designed and fabricated. This palladium film is well known to react to hydrogen, forming palladium hydride with optical properties dependent on the hydrogen concentration. This reaction yields a change in complex refractive index and thus also the laser’s output power. The advantages of these sensors are their small size, high sensitivity, wide dynamic range, inline integration, and scalability to arrays. These capabilities surpass most traditional optical sensors, which generally utilize fiber gratings, surface plasmon resonances, or surface reflectance. Although those methods can be effective, the edge-emitting laser sensors are easier to miniaturize, integrate, and array. This thesis is organized into four sections. First, a brief analysis of the rising importance of hydrogen energy sources and various hydrogen sensing mechanisms is presented, followed by an overview of the edge-emitting laser sensor in terms of device design and physical sensing properties. A detailed description of the associated fabrication process is given, along with its test setup. Finally, the device performance with regards to varying concentrations of hydrogen is analyzed, with suggestions for future work and improvements.","Item withdrawn by Mark Zulauf (zulauf@illinois.edu) on 2010-04-30T17:45:00Z Item was in collections: University of Illinois Theses & Dissertations (ID: 1) No. of bitstreams: 2 Griffin_Benjamin.docx: 6431952 bytes, checksum: 0bce143152b5a8b22c8407b6f42b5874 (MD5) Griffin_Benjamin.pdf: 1148226 bytes, checksum: 63a8afd30ffa49240d69bb508b8390ac (MD5)","Made available in DSpace on 2010-05-18T18:55:37Z (GMT). No. of bitstreams: 3 Griffin_Benjamin.docx: 6431952 bytes, checksum: 0bce143152b5a8b22c8407b6f42b5874 (MD5) Griffin_Benjamin.pdf: 1148226 bytes, checksum: 63a8afd30ffa49240d69bb508b8390ac (MD5) license.txt: 4066 bytes, checksum: 9e412702da33b830672752c1de4182d0 (MD5)","Item marked as restricted to the 'Administrator' Group (id=1) by William Ingram (wingram2@illinois.edu) on 2010-05-18T18:56:43Z Item is restricted until 2012-05-18T18:56:42Z","Item reinstated by Sarah Shreeves (sshreeve@illinois.edu) on 2012-05-19T10:00:16Z Item was in collections: Dissertations and Theses - Electrical and Computer Engineering (ID: 446) University of Illinois Dissertations and Theses (ID: 204) No. of bitstreams: 4 Griffin_Benjamin.pdf.txt: 75818 bytes, checksum: 26d069b7d0b11abb0dbaf72ee05a9fc3 (MD5) Griffin_Benjamin.docx: 6431952 bytes, checksum: 0bce143152b5a8b22c8407b6f42b5874 (MD5) Griffin_Benjamin.pdf: 1148226 bytes, checksum: 63a8afd30ffa49240d69bb508b8390ac (MD5) license.txt: 4066 bytes, checksum: 9e412702da33b830672752c1de4182d0 (MD5)","Item released from any restrictions by Sarah Shreeves (sshreeve@illinois.edu) on 2012-05-19T10:00:16Z"],"dc:identifier":["http://hdl.handle.net/2142/15998"],"dc:language":["en"],"dc:rights":["Copyright 2010 Benjamin G. Griffin"],"dc:subject":["Hydrogen","Hydrogen Sensing","Hydrogen Sensor","Palladium","Edge-Emitting Laser Sensor"],"dc:title":["Palladium coated edge-emitting lasers for hydrogen sensing applications"],"thesis:degree_discipline":["Electrical & Computer Engr"],"thesis:degree_level":["Thesis"],"thesis:degree_name":["M.S."],"thesis:institution_name":["University of Illinois at Urbana-Champaign"]},"updated_at":"2026-07-22T22:25:08Z"}