{"id":{"repo_id":"uiuc","oai_identifier":"oai:www.ideals.illinois.edu:2142/15561"},"canonical_url":"https://search.dev.ndltd.org/etd/uiuc/oai:www.ideals.illinois.edu:2142/15561","repository":{"repo_id":"uiuc","name":"University of Illinois - Urbana-Champaign","base_url":"https://www.ideals.illinois.edu/oai-pmh"},"display":{"title":"Theoretical and experimental studies of bending/stretching of inorganic electronic materials printed on plastic substrates and their practical applications","abstract":"Flexible electronics based on inorganic devices has attracted increasing interest in versatile applications, from commercial systems, such as flat panel displays, to new possible systems, such as paperlike display, sensors, and medical devices, due to its many potential advantages including established electrical performance in comparison with organic based devices. However, the behavior of inorganic materials on plastic substrate by bending has been not studied well and the degree of bendability has simply defined by the bend radius at which the strain reaches some substantial fraction of a fracture strain (e.g., ~1 %) in a typical inorganic film. This thesis has been focused on the fundamental scientific studies necessary to establish the accurate bending induced mechanics of these systems and demonstration of various new inorganic based applications with high bendable and stretchable properties. Firstly, comprehensive experimental and theoretical studies of bending in flexible inorganic electronics on plastic substrates enable to understand the limits of flexibility and, moreover, improve this property of inorganic electronics on plastic substrate. Secondly, based on these studies, the focus of this thesis has been on the developments of highly bendable arrays of single crystalline silicon solar cells on plastic and highly bendable, stretchable, and deformable III-V compound semiconductor inorganic light emitting diodes (ILEDs) display as practical applications.","abstract_html":"Flexible electronics based on inorganic devices has attracted increasing interest in versatile applications, from commercial systems, such as flat panel displays, to new possible systems, such as paperlike display, sensors, and medical devices, due to its many potential advantages including established electrical performance in comparison with organic based devices. However, the behavior of inorganic materials on plastic substrate by bending has been not studied well and the degree of bendability has simply defined by the bend radius at which the strain reaches some substantial fraction of a fracture strain (e.g., ~1 %) in a typical inorganic film. This thesis has been focused on the fundamental scientific studies necessary to establish the accurate bending induced mechanics of these systems and demonstration of various new inorganic based applications with high bendable and stretchable properties. Firstly, comprehensive experimental and theoretical studies of bending in flexible inorganic electronics on plastic substrates enable to understand the limits of flexibility and, moreover, improve this property of inorganic electronics on plastic substrate. Secondly, based on these studies, the focus of this thesis has been on the developments of highly bendable arrays of single crystalline silicon solar cells on plastic and highly bendable, stretchable, and deformable III-V compound semiconductor inorganic light emitting diodes (ILEDs) display as practical applications.","abstract_has_math":false,"creators":["Park, Sang Il"],"institution":"University of Illinois at Urbana-Champaign","degree_name":"Ph.D.","degree_level":"Dissertation","degree_discipline":"Materials Science & Engr","degree_department":null,"school":null,"contributors":["Rogers, John A.","Braun, Paul V.","Shim, Moonsub","Kim, Kyekyoon"],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2010,"date_issued":"2010-05-14T20:50:29Z","date_published":"2010-05-14T20:50:29Z","updated_at":"2026-07-22T22:25:08Z","subjects":["Flexible electronics","Stretchable electronics","Foldable electronics","Inorganics on plastic substrate","Inorganic light-emitting diodes (ILEDs)","Solar cells","Bending mechanics"],"languages":["en"],"rights":["Copyright 2010 Sang Il Park"],"rights_urls":[],"identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/2142/15561","outbound_label":"Handle","outbound_source":"dc:identifier"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Rogers, John A.","Braun, Paul V.","Shim, Moonsub","Kim, Kyekyoon"]},{"key":"dc:creator","label":"Author","values":["Park, Sang Il"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2010-05-14T20:50:29Z","2012-05-15T10:00:32Z","2010-5"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Materials Science & Engr"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Dissertation"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Ph.D."]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["University of Illinois at Urbana-Champaign"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Flexible electronics","Stretchable electronics","Foldable electronics","Inorganics on plastic substrate","Inorganic light-emitting diodes (ILEDs)","Solar cells","Bending mechanics"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language","label":"Dc Language","values":["en"]},{"key":"dc:rights","label":"Dc Rights","values":["Copyright 2010 Sang Il Park"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["http://hdl.handle.net/2142/15561"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description","label":"Description","values":["Flexible electronics based on inorganic devices has attracted increasing interest in versatile applications, from commercial systems, such as flat panel displays, to new possible systems, such as paperlike display, sensors, and medical devices, due to its many potential advantages including established electrical performance in comparison with organic based devices. However, the behavior of inorganic materials on plastic substrate by bending has been not studied well and the degree of bendability has simply defined by the bend radius at which the strain reaches some substantial fraction of a fracture strain (e.g., ~1 %) in a typical inorganic film. This thesis has been focused on the fundamental scientific studies necessary to establish the accurate bending induced mechanics of these systems and demonstration of various new inorganic based applications with high bendable and stretchable properties. Firstly, comprehensive experimental and theoretical studies of bending in flexible inorganic electronics on plastic substrates enable to understand the limits of flexibility and, moreover, improve this property of inorganic electronics on plastic substrate. Secondly, based on these studies, the focus of this thesis has been on the developments of highly bendable arrays of single crystalline silicon solar cells on plastic and highly bendable, stretchable, and deformable III-V compound semiconductor inorganic light emitting diodes (ILEDs) display as practical applications.","Item withdrawn by Alexis Thompson (athmpsn1@illinois.edu) on 2010-03-26T18:21:47Z Item was in collections: University of Illinois Theses & Dissertations (ID: 1) No. of bitstreams: 1 PARK_SANG IL.pdf: 12793376 bytes, checksum: b3206591b690958107204f14c0f729cc (MD5)","Made available in DSpace on 2010-05-14T20:50:29Z (GMT). No. of bitstreams: 4 PARK_SANG_IL.pdf: 12760733 bytes, checksum: 76cabeaeb72db8b090ad357caa033074 (MD5) PARK_SANG IL.pdf: 12793376 bytes, checksum: b3206591b690958107204f14c0f729cc (MD5) 1_PARK_SANG_IL.pdf: 12760648 bytes, checksum: 3c47b5e50bf49267ed764b34d6b4dd0d (MD5) license.txt: 4057 bytes, checksum: 0d85ae4331011edba835f422cd7ea293 (MD5)","Item marked as restricted to the 'UIUC Users [automated]' Group (id=2) by William Ingram (wingram2@illinois.edu) on 2010-05-14T20:52:45Z Item is restricted until 2012-05-14T20:52:43Z","Item reinstated by Sarah Shreeves (sshreeve@illinois.edu) on 2012-05-15T10:00:32Z Item was in collections: University of Illinois Dissertations and Theses (ID: 204) Dissertations and Theses - Materials Science and Engineering (ID: 649) No. of bitstreams: 5 1_PARK_SANG_IL.pdf.txt: 194517 bytes, checksum: 2a169f4110df3b0c3e54644c300b2be6 (MD5) PARK_SANG_IL.pdf: 12760733 bytes, checksum: 76cabeaeb72db8b090ad357caa033074 (MD5) PARK_SANG IL.pdf: 12793376 bytes, checksum: b3206591b690958107204f14c0f729cc (MD5) 1_PARK_SANG_IL.pdf: 12760648 bytes, checksum: 3c47b5e50bf49267ed764b34d6b4dd0d (MD5) license.txt: 4057 bytes, checksum: 0d85ae4331011edba835f422cd7ea293 (MD5)","Item released from any restrictions by Sarah Shreeves (sshreeve@illinois.edu) on 2012-05-15T10:00:32Z"]},{"key":"dc:title","label":"Title","values":["Theoretical and experimental studies of bending/stretching of inorganic electronic materials printed on plastic substrates and their practical applications"]}]}],"canonical_facts":{"dc:contributor":["Rogers, John A.","Braun, Paul V.","Shim, Moonsub","Kim, Kyekyoon"],"dc:creator":["Park, Sang Il"],"dc:date":["2010-05-14T20:50:29Z","2012-05-15T10:00:32Z","2010-5"],"dc:description":["Flexible electronics based on inorganic devices has attracted increasing interest in versatile applications, from commercial systems, such as flat panel displays, to new possible systems, such as paperlike display, sensors, and medical devices, due to its many potential advantages including established electrical performance in comparison with organic based devices. However, the behavior of inorganic materials on plastic substrate by bending has been not studied well and the degree of bendability has simply defined by the bend radius at which the strain reaches some substantial fraction of a fracture strain (e.g., ~1 %) in a typical inorganic film. This thesis has been focused on the fundamental scientific studies necessary to establish the accurate bending induced mechanics of these systems and demonstration of various new inorganic based applications with high bendable and stretchable properties. Firstly, comprehensive experimental and theoretical studies of bending in flexible inorganic electronics on plastic substrates enable to understand the limits of flexibility and, moreover, improve this property of inorganic electronics on plastic substrate. Secondly, based on these studies, the focus of this thesis has been on the developments of highly bendable arrays of single crystalline silicon solar cells on plastic and highly bendable, stretchable, and deformable III-V compound semiconductor inorganic light emitting diodes (ILEDs) display as practical applications.","Item withdrawn by Alexis Thompson (athmpsn1@illinois.edu) on 2010-03-26T18:21:47Z Item was in collections: University of Illinois Theses & Dissertations (ID: 1) No. of bitstreams: 1 PARK_SANG IL.pdf: 12793376 bytes, checksum: b3206591b690958107204f14c0f729cc (MD5)","Made available in DSpace on 2010-05-14T20:50:29Z (GMT). No. of bitstreams: 4 PARK_SANG_IL.pdf: 12760733 bytes, checksum: 76cabeaeb72db8b090ad357caa033074 (MD5) PARK_SANG IL.pdf: 12793376 bytes, checksum: b3206591b690958107204f14c0f729cc (MD5) 1_PARK_SANG_IL.pdf: 12760648 bytes, checksum: 3c47b5e50bf49267ed764b34d6b4dd0d (MD5) license.txt: 4057 bytes, checksum: 0d85ae4331011edba835f422cd7ea293 (MD5)","Item marked as restricted to the 'UIUC Users [automated]' Group (id=2) by William Ingram (wingram2@illinois.edu) on 2010-05-14T20:52:45Z Item is restricted until 2012-05-14T20:52:43Z","Item reinstated by Sarah Shreeves (sshreeve@illinois.edu) on 2012-05-15T10:00:32Z Item was in collections: University of Illinois Dissertations and Theses (ID: 204) Dissertations and Theses - Materials Science and Engineering (ID: 649) No. of bitstreams: 5 1_PARK_SANG_IL.pdf.txt: 194517 bytes, checksum: 2a169f4110df3b0c3e54644c300b2be6 (MD5) PARK_SANG_IL.pdf: 12760733 bytes, checksum: 76cabeaeb72db8b090ad357caa033074 (MD5) PARK_SANG IL.pdf: 12793376 bytes, checksum: b3206591b690958107204f14c0f729cc (MD5) 1_PARK_SANG_IL.pdf: 12760648 bytes, checksum: 3c47b5e50bf49267ed764b34d6b4dd0d (MD5) license.txt: 4057 bytes, checksum: 0d85ae4331011edba835f422cd7ea293 (MD5)","Item released from any restrictions by Sarah Shreeves (sshreeve@illinois.edu) on 2012-05-15T10:00:32Z"],"dc:identifier":["http://hdl.handle.net/2142/15561"],"dc:language":["en"],"dc:rights":["Copyright 2010 Sang Il Park"],"dc:subject":["Flexible electronics","Stretchable electronics","Foldable electronics","Inorganics on plastic substrate","Inorganic light-emitting diodes (ILEDs)","Solar cells","Bending mechanics"],"dc:title":["Theoretical and experimental studies of bending/stretching of inorganic electronic materials printed on plastic substrates and their practical applications"],"thesis:degree_discipline":["Materials Science & Engr"],"thesis:degree_level":["Dissertation"],"thesis:degree_name":["Ph.D."],"thesis:institution_name":["University of Illinois at Urbana-Champaign"]},"updated_at":"2026-07-22T22:25:08Z"}