{"id":{"repo_id":"uiuc","oai_identifier":"oai:www.ideals.illinois.edu:2142/102777"},"canonical_url":"https://search.dev.ndltd.org/etd/uiuc/oai:www.ideals.illinois.edu:2142/102777","repository":{"repo_id":"uiuc","name":"University of Illinois - Urbana-Champaign","base_url":"https://www.ideals.illinois.edu/oai-pmh"},"display":{"title":"Spectrum management for high efficiency photonic devices","abstract":"Spectrum management holds great promise for high-performance photonics devices. Optical elements that split, up- or down-convert the available light to a specified spectrum can result in higher efficiencies in various devices such as photovoltaic cells, photodetectors, and electronic displays. In this thesis, the method of spectrum splitting to efficiently utilize the full spectrum of sunlight in converting from solar energy to electricity was demonstrated. Multi-junction solar cells are already efficient, but further gains are possible by splitting the solar spectrum laterally, rather than vertically, onto electrically isolated cells. A textured thin film was used to diffract two spectral bands to laterally displaced regions in the far field. The optimized optical element having multi-level textures was fabricated using 3D direct laser writing on photoresist. The fabricated samples were optically characterized and potential modifications to achieve even higher efficiencies were pointed out. Further, this thesis demonstrated a new display architecture that can alleviate problems associated with liquid crystal display (LCD) devices: substantial losses in optical intensity due to employed color filters and low ambient contrast ratio because of reflection of external light from the front surface. A luminescent film having quantum dots was placed inside an enclosed microcavity. The design for a high-contrast and high efficiency display comprised an enclosed cavity having a front wall and a back wall, where the front wall comprised a pinhole opening for emission of light from the cavity and the back wall was configured to transmit light into the cavity. The outer surface of the front wall was made to absorb substantially all optical wavelengths of externally incident light so as to appear black. The inner surface of the front wall and sidewalls were highly reflective to promote photon recycling within the cavity and light emission through the pinhole opening. Finally, although the single pixel demonstration served to optimize the optics within the cavity and study the physics of the proposed architecture, a micrometer sized pixel array was proposed since the current portable electronics industry demands displays with large pixel arrays, where each pixel is on the order of micrometers in size. An individually addressable micropixel array was proposed and fabricated using standard microfabrication techniques that can be integrated into commercial displays.","abstract_html":"Spectrum management holds great promise for high-performance photonics devices. Optical elements that split, up- or down-convert the available light to a specified spectrum can result in higher efficiencies in various devices such as photovoltaic cells, photodetectors, and electronic displays. In this thesis, the method of spectrum splitting to efficiently utilize the full spectrum of sunlight in converting from solar energy to electricity was demonstrated. Multi-junction solar cells are already efficient, but further gains are possible by splitting the solar spectrum laterally, rather than vertically, onto electrically isolated cells. A textured thin film was used to diffract two spectral bands to laterally displaced regions in the far field. The optimized optical element having multi-level textures was fabricated using 3D direct laser writing on photoresist. The fabricated samples were optically characterized and potential modifications to achieve even higher efficiencies were pointed out. Further, this thesis demonstrated a new display architecture that can alleviate problems associated with liquid crystal display (LCD) devices: substantial losses in optical intensity due to employed color filters and low ambient contrast ratio because of reflection of external light from the front surface. A luminescent film having quantum dots was placed inside an enclosed microcavity. The design for a high-contrast and high efficiency display comprised an enclosed cavity having a front wall and a back wall, where the front wall comprised a pinhole opening for emission of light from the cavity and the back wall was configured to transmit light into the cavity. The outer surface of the front wall was made to absorb substantially all optical wavelengths of externally incident light so as to appear black. The inner surface of the front wall and sidewalls were highly reflective to promote photon recycling within the cavity and light emission through the pinhole opening. Finally, although the single pixel demonstration served to optimize the optics within the cavity and study the physics of the proposed architecture, a micrometer sized pixel array was proposed since the current portable electronics industry demands displays with large pixel arrays, where each pixel is on the order of micrometers in size. An individually addressable micropixel array was proposed and fabricated using standard microfabrication techniques that can be integrated into commercial displays.","abstract_has_math":false,"creators":["Cifci, Osman Safa"],"institution":"University of Illinois at Urbana-Champaign","degree_name":"Ph.D.","degree_level":"Dissertation","degree_discipline":"Materials Science & Engr","degree_department":null,"school":null,"contributors":["Braun, Paul V.","Shim, Moonsub","Chen, Qian","Toussaint, Kimani C."],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2019,"date_issued":"2019-02-07T20:35:52Z","date_published":"2019-02-07T20:35:52Z","updated_at":"2026-07-22T22:24:42Z","subjects":["Spectrum management","photonics"],"languages":["en"],"rights":["Copyright 2018 Osman Cifci"],"rights_urls":[],"identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/2142/102777","outbound_label":"Handle","outbound_source":"dc:identifier"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Braun, Paul V.","Shim, Moonsub","Chen, Qian","Toussaint, Kimani C."]},{"key":"dc:creator","label":"Author","values":["Cifci, Osman Safa"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2019-02-07T20:35:52Z","2021-02-08T10:15:29Z","2018-10-02","2018-12"]},{"key":"dc:type","label":"Dc Type","values":["text"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Materials Science & Engr"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Dissertation"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Ph.D."]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["University of Illinois at Urbana-Champaign"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Spectrum management","photonics"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language","label":"Dc Language","values":["en"]},{"key":"dc:rights","label":"Dc Rights","values":["Copyright 2018 Osman Cifci"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["http://hdl.handle.net/2142/102777"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description","label":"Description","values":["Spectrum management holds great promise for high-performance photonics devices. Optical elements that split, up- or down-convert the available light to a specified spectrum can result in higher efficiencies in various devices such as photovoltaic cells, photodetectors, and electronic displays. In this thesis, the method of spectrum splitting to efficiently utilize the full spectrum of sunlight in converting from solar energy to electricity was demonstrated. Multi-junction solar cells are already efficient, but further gains are possible by splitting the solar spectrum laterally, rather than vertically, onto electrically isolated cells. A textured thin film was used to diffract two spectral bands to laterally displaced regions in the far field. The optimized optical element having multi-level textures was fabricated using 3D direct laser writing on photoresist. The fabricated samples were optically characterized and potential modifications to achieve even higher efficiencies were pointed out. Further, this thesis demonstrated a new display architecture that can alleviate problems associated with liquid crystal display (LCD) devices: substantial losses in optical intensity due to employed color filters and low ambient contrast ratio because of reflection of external light from the front surface. A luminescent film having quantum dots was placed inside an enclosed microcavity. The design for a high-contrast and high efficiency display comprised an enclosed cavity having a front wall and a back wall, where the front wall comprised a pinhole opening for emission of light from the cavity and the back wall was configured to transmit light into the cavity. The outer surface of the front wall was made to absorb substantially all optical wavelengths of externally incident light so as to appear black. The inner surface of the front wall and sidewalls were highly reflective to promote photon recycling within the cavity and light emission through the pinhole opening. Finally, although the single pixel demonstration served to optimize the optics within the cavity and study the physics of the proposed architecture, a micrometer sized pixel array was proposed since the current portable electronics industry demands displays with large pixel arrays, where each pixel is on the order of micrometers in size. An individually addressable micropixel array was proposed and fabricated using standard microfabrication techniques that can be integrated into commercial displays.","Submission published under a 24 month embargo labeled 'U of I Access', the embargo will last until 2020-12-01","The student, Osman Cifci, accepted the attached license on 2018-09-10 at 14:03.","The student, Osman Cifci, submitted this Dissertation for approval on 2018-09-10 at 14:12.","This Dissertation was approved for publication on 2018-10-02 at 10:33.","DSpace SAF Submission Ingestion Package generated from Vireo submission #13005 on 2019-02-07 at 14:16:30","Made available in DSpace on 2019-02-07T20:35:52Z (GMT). No. of bitstreams: 2 CIFCI-DISSERTATION-2018.pdf: 14805556 bytes, checksum: fd8fbb410aee77953e9655a8ea154fc0 (MD5) LICENSE.txt: 4208 bytes, checksum: ebf2c589517e41b5d30b12fa318cfbdc (MD5) Previous issue date: 2018-10-02","Embargo set by: Seth Robbins for item 109801 Lift date: 2021-02-07T20:36:09Z Reason: Author requested U of Illinois access only (OA after 2yrs) in Vireo ETD system","Embargo set by: Seth Robbins for item 109801 Lift date: 2021-02-07T20:39:46Z Reason: Author requested U of Illinois access only (OA after 2yrs) in Vireo ETD system","Embargo set by: Seth Robbins for item 109801 Lift date: 2021-02-07T20:44:35Z Reason: Author requested U of Illinois access only (OA after 2yrs) in Vireo ETD system","U of I Only Restriction Lifted for Item 109801 on 2021-02-08T10:15:29Z."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dc:title","label":"Title","values":["Spectrum management for high efficiency photonic devices"]}]}],"canonical_facts":{"dc:contributor":["Braun, Paul V.","Shim, Moonsub","Chen, Qian","Toussaint, Kimani C."],"dc:creator":["Cifci, Osman Safa"],"dc:date":["2019-02-07T20:35:52Z","2021-02-08T10:15:29Z","2018-10-02","2018-12"],"dc:description":["Spectrum management holds great promise for high-performance photonics devices. Optical elements that split, up- or down-convert the available light to a specified spectrum can result in higher efficiencies in various devices such as photovoltaic cells, photodetectors, and electronic displays. In this thesis, the method of spectrum splitting to efficiently utilize the full spectrum of sunlight in converting from solar energy to electricity was demonstrated. Multi-junction solar cells are already efficient, but further gains are possible by splitting the solar spectrum laterally, rather than vertically, onto electrically isolated cells. A textured thin film was used to diffract two spectral bands to laterally displaced regions in the far field. The optimized optical element having multi-level textures was fabricated using 3D direct laser writing on photoresist. The fabricated samples were optically characterized and potential modifications to achieve even higher efficiencies were pointed out. Further, this thesis demonstrated a new display architecture that can alleviate problems associated with liquid crystal display (LCD) devices: substantial losses in optical intensity due to employed color filters and low ambient contrast ratio because of reflection of external light from the front surface. A luminescent film having quantum dots was placed inside an enclosed microcavity. The design for a high-contrast and high efficiency display comprised an enclosed cavity having a front wall and a back wall, where the front wall comprised a pinhole opening for emission of light from the cavity and the back wall was configured to transmit light into the cavity. The outer surface of the front wall was made to absorb substantially all optical wavelengths of externally incident light so as to appear black. The inner surface of the front wall and sidewalls were highly reflective to promote photon recycling within the cavity and light emission through the pinhole opening. Finally, although the single pixel demonstration served to optimize the optics within the cavity and study the physics of the proposed architecture, a micrometer sized pixel array was proposed since the current portable electronics industry demands displays with large pixel arrays, where each pixel is on the order of micrometers in size. An individually addressable micropixel array was proposed and fabricated using standard microfabrication techniques that can be integrated into commercial displays.","Submission published under a 24 month embargo labeled 'U of I Access', the embargo will last until 2020-12-01","The student, Osman Cifci, accepted the attached license on 2018-09-10 at 14:03.","The student, Osman Cifci, submitted this Dissertation for approval on 2018-09-10 at 14:12.","This Dissertation was approved for publication on 2018-10-02 at 10:33.","DSpace SAF Submission Ingestion Package generated from Vireo submission #13005 on 2019-02-07 at 14:16:30","Made available in DSpace on 2019-02-07T20:35:52Z (GMT). No. of bitstreams: 2 CIFCI-DISSERTATION-2018.pdf: 14805556 bytes, checksum: fd8fbb410aee77953e9655a8ea154fc0 (MD5) LICENSE.txt: 4208 bytes, checksum: ebf2c589517e41b5d30b12fa318cfbdc (MD5) Previous issue date: 2018-10-02","Embargo set by: Seth Robbins for item 109801 Lift date: 2021-02-07T20:36:09Z Reason: Author requested U of Illinois access only (OA after 2yrs) in Vireo ETD system","Embargo set by: Seth Robbins for item 109801 Lift date: 2021-02-07T20:39:46Z Reason: Author requested U of Illinois access only (OA after 2yrs) in Vireo ETD system","Embargo set by: Seth Robbins for item 109801 Lift date: 2021-02-07T20:44:35Z Reason: Author requested U of Illinois access only (OA after 2yrs) in Vireo ETD system","U of I Only Restriction Lifted for Item 109801 on 2021-02-08T10:15:29Z."],"dc:format":["application/pdf"],"dc:identifier":["http://hdl.handle.net/2142/102777"],"dc:language":["en"],"dc:rights":["Copyright 2018 Osman Cifci"],"dc:subject":["Spectrum management","photonics"],"dc:title":["Spectrum management for high efficiency photonic devices"],"dc:type":["text"],"thesis:degree_discipline":["Materials Science & Engr"],"thesis:degree_level":["Dissertation"],"thesis:degree_name":["Ph.D."],"thesis:institution_name":["University of Illinois at Urbana-Champaign"]},"updated_at":"2026-07-22T22:24:42Z"}