Back to results

Robert Gordon University

An experimental investigation on Archie parameters at ambient and overburden conditions of clean reservoir rocks.

Abstract

dc:description.abstract

This thesis presents an experimental investigation of the effect of overburden pressure, porosity type and experimental conditions on the electrical properties (Archie's parameters) of clean reservoir rocks. The samples were from sandstone formations (North Sea), and carbonate formations (Sirte Basin, Libya). Although much work has been carried out on the electrical properties of sandstones (which are considered as ideal representatives of clean reservoir rocks) few experimental studies have been made for carbonate rocks. The continuous injection technique was used to study the effects of flow displacement mechanisms and fluid characteristics on the resistivity-saturation relationships for both sandstone and carbonate samples. The results showed that the saturation exponent is dependent on both the injection rate of the displacing phase and the fluid viscosities, and it is demonstrated that large errors in water/hydrocarbon saturation can arise if conditions used for the core analysis differ widely from those in the formation. The classical Archie's equation does not take into account the effects of these variables, and therefore it is recommended that the saturation exponent to be used in log analysis should be evaluated with great caution. The Archie's equation parameters of carbonate rocks were found to vary with porosity type. Samples with mainly interparticle porosity type had m = 2, while moldic and/or vuggy samples gave higher values, and n was found to be only weakly dependent on porosity type. These results are of particular significance, as little work has previously been carried out on carbonate rocks, which show greater variations in porosity type than the sandstones which have been studied in considerable detail. Measurements of the effect of overburden pressure showed that this has a significant effect on the values of the Archie parameters, depending on rock type and pressure applied, as well as on rock porosity. A better understanding of the mechanism of this effect has been achieved which will aid in improved formation evaluation. The study has permitted a critical evaluation of the applicability of Archie's equation for different experimental conditions and rocks of different porosity types. It has been demonstrated that the equation has significant limitations and its applicability depends to a major extent on the experimental conditions used in core analysis.

Degree

thesis:*
Grantor dc:publisher.institution
Robert Gordon University
Year dc:date.issued
1999

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Al-Mahtot, Omran Bahri
Advisor dc:contributor.advisor
  • W.E. Mason

Subjects

dc:subject × 6

Rights

Language dc:language
en

Identifiers

dc:identifier.*
Identifier
oai:rgu-repository.worktribe.com:2807275
https://doi.org/10.48526/rgu-wt-2807275
OAI identifier oai:identifier
oai:rgu-repository.worktribe.com:2807275

Chain of custody

source
Harvested from
Robert Gordon University
Base URL
rgu-repository.worktribe.com/oaiprovider
Last updated
2026-07-24
Source record
OAI-PMH GetRecord
citation

Al-Mahtot, Omran Bahri. An experimental investigation on Archie parameters at ambient and overburden conditions of clean reservoir rocks.. Robert Gordon University, 1999. https://rgu-repository.worktribe.com/2807275/1/AL-MAHTOT%201999%20An%20experimental%20investigation