Emulsion Polymerization Using Switchable Surfactants

The work presented herein focuses on expanding the use of CO2-triggered switchable surfactants in emulsion polymerization of hydrophobic and hydrophilic monomers. Bicarbonate salts of the following compounds were employed as surfactants in the emulsion polymerization of styrene, methyl methacrylate (MMA) and/or butyl methacrylate (BMA): N’-hexadecyl-N,N-dimethylacetamidine (1a), N’-dodecyl N,N-dimethylacetamidine (2a) and N’-(4-decylphenyl)-N,N-dimethylacetamidine (3a). A systematic study of the effects of surfactant and initiator concentrations and solids content on the resulting particle size and ζ-potential was carried out, showing that a wide range of particle sizes (40 – 470 nm) can be obtained. It was found that as the basicity of the surfactant decreased, the particle size generated from emulsion polymerization increased. Destabilization of these latexes did not require the addition of salts and was carried out using only non-acidic gases and heat. It was shown that solids content, temperature, particle size and surfactant basicity greatly affect the rate of destabilization of latexes. The area occupied by N’-dodecyl-N,N-dimethylacetamidinium acetate on PMMA particles was determined to be 104 Å2. The monomer-D2O partition coefficient of 2a was determined to be 21 for styrene and 2.2 for MMA. The monomer-D2O partition coefficient of the bicarbonate salt of 2a was determined to be 1.2 for styrene and 0.85 for MMA. An initial assessment of the use of switchable surfactants in the generation of inverse emulsions was carried out. It was determined that butylated polyethyleneimine (BPEI) can successfully stabilize inverse emulsions of cyclohexane and aqueous 2-(dimethylamino)ethyl methacrylate. Upon CO2 introduction, this emulsion separates into two distinct phases.

Department dc:contributor.department

Chemistry

Year dc:date.issued

2011

Author dc:creator

• Fowler, Candace Irene

Advisors dc:contributor.supervisor

• Jessop, Philip G.
• Cunningham, Michael F.

• Styrene
• Cationic Surfactants
• butyl methacrylate
• switchable
• Polymerization
• Methyl methacrylate

Language dc:language.iso

eng

Handle dc:identifier.uri

http://hdl.handle.net/1974/6753

OAI identifier oai:identifier

oai:queensu.scholaris.ca:1974/6753