Condition monitoring of train wheels using a cost-effective smart rail pad

The present study focuses on the condition monitoring of train wheels utilizing an 3D printed rail pad that is embedded with widely available accelerometers and a strain gauge. This smart rail pad was used on a heavy haul railway line to monitor train wheels by identifying any wheel defects and measuring the respective wheel loads. A series of laboratory material tests were conducted on various 3D printing materials to access the right material for the smart rail pad. Dynamic and static loading tests were carried out to determine whether the 3D printed rail pads can withstand the typical forces exerted by a passing train. Field tests were done to determine the performance of the smart rail pads in operational conditions. Results indicated that the smart rail pads were able to identify 60 % of the wheel flats and able to measure the wheel loads by comparing it to the control measurements. Nonetheless, the smart rail pads presented a good correlation between the measured wheel loads and the true values, while the identification of wheel flats was influenced by the low sampling rate of the system.

Grantor dc:publisher

University of Pretoria

Year dc:date.issued

2022

Advisor dc:contributor.advisor

• Grabe, P.J. (Hannes)

• Condition monitoring
• Additive manufacturing
• Smart materials
• Wheel flats
• Wheel-rail contact force
• UCTD

Statement dc:rights

• © 2022 University of Pretoria. All rights reserved. The copyright in this work vests in the University of Pretoria. No part of this work may be reproduced or transmitted in any form or by any means, without the prior written permission of the University of Pretoria.

Language dc:language.iso

en

Dc Identifier Other

A2022

OAI identifier oai:identifier

oai:repository.up.ac.za:2263/84010