Back to results

University of Toledo Health Science Campus

Aerosol Samplers Comparison: IOM Dual Sampler (Inhalable & Respirable) vs Conventional Methods for Assessing Welders Exposure to Manganese

Abstract

dc:description

Occupational exposure to airborne manganese (Mn) is currently determined using National Institute for Occupational Safety and Health (NIOSH) and Occupational Safety and Health Administration (OSHA) analytical methods for particulate not otherwise regulated. The Institute of Occupational Medicine (IOM) dual fraction sampler is capable of providing both inhalable and respirable portions of airborne particles by using only one sampling device. For this study, the IOM dual fraction sampler was compared with OSHA method ID-125G for determining occupational exposure to airborne Mn contaminant during Shielded Metal Arc Welding (SMAW), which was performed in a barge at a marine facility. An aluminum cyclone was used with a 25-mm Mixed Cellulose Ester (MCE) filter to sample respirable Mn contaminants. A 25-mm MCE filter was also used to sample total Mn contaminants. All monitoring was performed by area sampling. The aluminum cyclone readings, except one, were consistently higher than those of the IOM dual sampler (respirable) readings; statistically speaking, the aluminum cyclone showed significantly (p < 0.01) more exposure than did the IOM dual sampler (respirable). Therefore, the findings of this study suggest that the IOM dual sampler is not recommended as an alternative to the aluminum cyclone for the sampling of respirable Mn contaminants. However, the readings of conventional total particle sampler were not significantly different from those of the IOM dual sampler (inhalable). Inhalable and total are compared in this study and the results support the conversion factor of 1.0, which is for welding fume. Therefore, the IOM dual sampler can be used as an alternative method to conventional total particle sampler.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Occupational Health (MSOH)
Level thesis:degree_level
masters
Discipline thesis:degree_discipline
College of Medicine
Grantor dc:publisher
University of Toledo Health Science Campus
Year dc:date
2013

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Shomody, Melissa A.
Contributors dc:contributor
  • Akbar, Farhang

Subjects

dc:subject × 5

Rights

dc:rights
Statement dc:rights
  • unrestricted
  • This thesis or dissertation is protected by copyright: all rights reserved. It may not be copied or redistributed beyond the terms of applicable copyright laws.
Language dc:language
English

Identifiers

dc:identifier.*
OAI identifier oai:identifier
oai:etd.ohiolink.edu:mco1365152938

Chain of custody

source
Harvested from
OhioLINK
Base URL
etd.ohiolink.edu/acprod/odb_etd/ws/oai/oai
Last updated
2026-07-24
Source record
OAI-PMH GetRecord
citation

Shomody, Melissa A.. Aerosol Samplers Comparison: IOM Dual Sampler (Inhalable & Respirable) vs Conventional Methods for Assessing Welders Exposure to Manganese. masters thesis, University of Toledo Health Science Campus, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=mco1365152938