{"id":{"repo_id":"njit","oai_identifier":"oai:digitalcommons.njit.edu:theses-1048"},"canonical_url":"https://search.dev.ndltd.org/etd/njit/oai:digitalcommons.njit.edu:theses-1048","repository":{"repo_id":"njit","name":"NJIT","base_url":"https://digitalcommons.njit.edu/do/oai/"},"display":{"title":"A FPGA/DSP design for real-time fracture detection using low transient pulse","abstract":"This work presents the hardware and software architecture for the detection of fractures and edges in materials. While the detection method is based on the novel concept of Low Transient Pulse (LTP), the overall system implementation is based on two digital microelectronics technologies widely used for signal processing: Digital Signal Processor (DSP) and Field Programmable Gate Array (FPGA). Under the proposed architecture, the DSP carries out the analysis of the received baseband signal at a lower rate and hence can be used for large number of signal channels. The FPGA's master clock runs at a higher frequency (62.5MHz) for the generation of LTP signal and to demodulate the passband ultrasonic signals sampled at 1MHz which interrupts the DSP at every 1 [Is. This research elaborates on designing a Quadrature Amplitude Modulator - demodulator (QAM) on the FPGA for the received signal from the ultrasound and edge detection on the DSP processor to detect the presence of edges/fractures on a test Sawbone plate. In this work, the LTP technology is applied to determine the location of the Sawbone plate edges based on the reflected signals to the receivers. This signal is then passed through a QAM to get the maxima (peaks) at the received signal to study the parameters in the DSP. This work successfully demonstrates the feasibility of modular programming approach across the two platforms. The dual time scale platform readily accommodates higher temporal resolution needed for the generation of Low Transient Pulses and the processing of real time baseband signals on the DSP for various test conditions.","abstract_html":"This work presents the hardware and software architecture for the detection of fractures and edges in materials. While the detection method is based on the novel concept of Low Transient Pulse (LTP), the overall system implementation is based on two digital microelectronics technologies widely used for signal processing: Digital Signal Processor (DSP) and Field Programmable Gate Array (FPGA). Under the proposed architecture, the DSP carries out the analysis of the received baseband signal at a lower rate and hence can be used for large number of signal channels. The FPGA's master clock runs at a higher frequency (62.5MHz) for the generation of LTP signal and to demodulate the passband ultrasonic signals sampled at 1MHz which interrupts the DSP at every 1 [Is. This research elaborates on designing a Quadrature Amplitude Modulator - demodulator (QAM) on the FPGA for the received signal from the ultrasound and edge detection on the DSP processor to detect the presence of edges/fractures on a test Sawbone plate. In this work, the LTP technology is applied to determine the location of the Sawbone plate edges based on the reflected signals to the receivers. This signal is then passed through a QAM to get the maxima (peaks) at the received signal to study the parameters in the DSP. This work successfully demonstrates the feasibility of modular programming approach across the two platforms. The dual time scale platform readily accommodates higher temporal resolution needed for the generation of Low Transient Pulses and the processing of real time baseband signals on the DSP for various test conditions.","abstract_has_math":false,"creators":["Mathur, Akash"],"institution":null,"degree_name":"Master of Science in Electrical Engineering - (M.S.)","degree_level":null,"degree_discipline":"Electrical and Computer Engineering","degree_department":null,"school":null,"contributors":["Timothy Nam Chang","Durgamadhab Misra","Edwin Hou"],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2010,"date_issued":"2010-01-31T08:00:00Z","date_published":"2010-01-31T08:00:00Z","updated_at":"2026-07-24T03:22:19Z","subjects":["Fracture detection","Edge detection","Digital signal processor","Field programmable gate array","Electrical and Electronics"],"languages":[],"rights":[],"rights_urls":[],"identifier_entries":[]},"links":{"outbound_url":"https://digitalcommons.njit.edu/theses/49","outbound_label":"Repository record","outbound_source":"dc:identifier"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Timothy Nam Chang","Durgamadhab Misra","Edwin Hou"]},{"key":"dc:creator","label":"Author","values":["Mathur, Akash"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Electrical and Computer Engineering"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Master of Science in Electrical Engineering - (M.S.)"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Fracture detection","Edge detection","Digital signal processor","Field programmable gate array","Electrical and Electronics"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["https://digitalcommons.njit.edu/theses/49"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["This work presents the hardware and software architecture for the detection of fractures and edges in materials. While the detection method is based on the novel concept of Low Transient Pulse (LTP), the overall system implementation is based on two digital microelectronics technologies widely used for signal processing: Digital Signal Processor (DSP) and Field Programmable Gate Array (FPGA). Under the proposed architecture, the DSP carries out the analysis of the received baseband signal at a lower rate and hence can be used for large number of signal channels. The FPGA's master clock runs at a higher frequency (62.5MHz) for the generation of LTP signal and to demodulate the passband ultrasonic signals sampled at 1MHz which interrupts the DSP at every 1 [Is. This research elaborates on designing a Quadrature Amplitude Modulator - demodulator (QAM) on the FPGA for the received signal from the ultrasound and edge detection on the DSP processor to detect the presence of edges/fractures on a test Sawbone plate. In this work, the LTP technology is applied to determine the location of the Sawbone plate edges based on the reflected signals to the receivers. This signal is then passed through a QAM to get the maxima (peaks) at the received signal to study the parameters in the DSP. This work successfully demonstrates the feasibility of modular programming approach across the two platforms. The dual time scale platform readily accommodates higher temporal resolution needed for the generation of Low Transient Pulses and the processing of real time baseband signals on the DSP for various test conditions."]},{"key":"dc:title","label":"Title","values":["A FPGA/DSP design for real-time fracture detection using low transient pulse"]}]}],"canonical_facts":{"dc:contributor":["Timothy Nam Chang","Durgamadhab Misra","Edwin Hou"],"dc:creator":["Mathur, Akash"],"dc:description.abstract":["This work presents the hardware and software architecture for the detection of fractures and edges in materials. While the detection method is based on the novel concept of Low Transient Pulse (LTP), the overall system implementation is based on two digital microelectronics technologies widely used for signal processing: Digital Signal Processor (DSP) and Field Programmable Gate Array (FPGA). Under the proposed architecture, the DSP carries out the analysis of the received baseband signal at a lower rate and hence can be used for large number of signal channels. The FPGA's master clock runs at a higher frequency (62.5MHz) for the generation of LTP signal and to demodulate the passband ultrasonic signals sampled at 1MHz which interrupts the DSP at every 1 [Is. This research elaborates on designing a Quadrature Amplitude Modulator - demodulator (QAM) on the FPGA for the received signal from the ultrasound and edge detection on the DSP processor to detect the presence of edges/fractures on a test Sawbone plate. In this work, the LTP technology is applied to determine the location of the Sawbone plate edges based on the reflected signals to the receivers. This signal is then passed through a QAM to get the maxima (peaks) at the received signal to study the parameters in the DSP. This work successfully demonstrates the feasibility of modular programming approach across the two platforms. The dual time scale platform readily accommodates higher temporal resolution needed for the generation of Low Transient Pulses and the processing of real time baseband signals on the DSP for various test conditions."],"dc:identifier":["https://digitalcommons.njit.edu/theses/49"],"dc:subject":["Fracture detection","Edge detection","Digital signal processor","Field programmable gate array","Electrical and Electronics"],"dc:title":["A FPGA/DSP design for real-time fracture detection using low transient pulse"],"dc:type":["Thesis"],"thesis:degree_discipline":["Electrical and Computer Engineering"],"thesis:degree_name":["Master of Science in Electrical Engineering - (M.S.)"]},"updated_at":"2026-07-24T03:22:19Z"}