{"id":{"repo_id":"njit","oai_identifier":"oai:digitalcommons.njit.edu:dissertations-1729"},"canonical_url":"https://search.dev.ndltd.org/etd/njit/oai:digitalcommons.njit.edu:dissertations-1729","repository":{"repo_id":"njit","name":"NJIT","base_url":"https://digitalcommons.njit.edu/do/oai/"},"display":{"title":"Corrosion studies on alpha tantalum and beta tantalum coated steel","abstract":"Tantalum coating by sputtering, one form of physical vapor deposition (PVD), has been investigated as a replacement for chromium coatings on gun bores to protect them from erosion and corrosion due to its high ductility and high corrosion resistance in aggressive environments. When deposited as a film on steel substrates by sputtering, either [alpha]-Ta, [beta]-Ta, or a mixture of both phases have been observed under varying deposition conditions. To evaluate corrosion behavior of Ta coatings, electrochemical impedance spectroscopy and potentiodynamic polarization were conducted as a function of coating thickness. The coating porosity was observed to decrease with increasing coating thickness and hence, coatings greater than 50 um exhibited corrosion resistance consistent with the bulk phase. Substrate roughness appeared to have little to no effect on the coating quality with respect to corrosion performance for 50 um [alpha]-Ta coatings. Coatings produced in full scale processes revealed that for Ta coating (< 50 um), the corrosion process was dominated by dissolution of the steel substrate through open pores, however, at the end of 5 days, coating degradation was not observed. In contrast, while open pores were not observed with the Cr coatings, the corrosion resistance decreased as a function of time under acidic conditions, resulting in dissolution and oxidation of Cr. Initially, however, the sputtered Cr coating exhibited improved corrosion resistance over the electrodeposited one, potentially due to its oxide film. The unique properties of tantalum oxide films produced from anodic oxidation and thermal oxidation demonstrates that the nanoscale oxide films formed exhibit an ordered local structure reflecting the very compact nature that enhances its corrosion resistance.","abstract_html":"Tantalum coating by sputtering, one form of physical vapor deposition (PVD), has been investigated as a replacement for chromium coatings on gun bores to protect them from erosion and corrosion due to its high ductility and high corrosion resistance in aggressive environments. When deposited as a film on steel substrates by sputtering, either [alpha]-Ta, [beta]-Ta, or a mixture of both phases have been observed under varying deposition conditions. To evaluate corrosion behavior of Ta coatings, electrochemical impedance spectroscopy and potentiodynamic polarization were conducted as a function of coating thickness. The coating porosity was observed to decrease with increasing coating thickness and hence, coatings greater than 50 um exhibited corrosion resistance consistent with the bulk phase. Substrate roughness appeared to have little to no effect on the coating quality with respect to corrosion performance for 50 um [alpha]-Ta coatings. Coatings produced in full scale processes revealed that for Ta coating (&lt; 50 um), the corrosion process was dominated by dissolution of the steel substrate through open pores, however, at the end of 5 days, coating degradation was not observed. In contrast, while open pores were not observed with the Cr coatings, the corrosion resistance decreased as a function of time under acidic conditions, resulting in dissolution and oxidation of Cr. Initially, however, the sputtered Cr coating exhibited improved corrosion resistance over the electrodeposited one, potentially due to its oxide film. The unique properties of tantalum oxide films produced from anodic oxidation and thermal oxidation demonstrates that the nanoscale oxide films formed exhibit an ordered local structure reflecting the very compact nature that enhances its corrosion resistance.","abstract_has_math":false,"creators":["Maeng, Sung Min"],"institution":null,"degree_name":"Doctor of Philosophy in Environmental Engineering - (Ph.D.)","degree_level":null,"degree_discipline":"Civil and Environmental Engineering","degree_department":null,"school":null,"contributors":["Lisa Axe","Trevor Tyson","Daniel Watts"],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2005,"date_issued":"2005-01-31T08:00:00Z","date_published":"2005-01-31T08:00:00Z","updated_at":"2026-07-24T03:22:58Z","subjects":["Tantalum","Magnetron sputtering","Corrosion behavior","Coating","Environmental Engineering"],"languages":[],"rights":[],"rights_urls":[],"identifier_entries":[]},"links":{"outbound_url":"https://digitalcommons.njit.edu/dissertations/674","outbound_label":"Repository record","outbound_source":"dc:identifier"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Lisa Axe","Trevor Tyson","Daniel Watts"]},{"key":"dc:creator","label":"Author","values":["Maeng, Sung Min"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:type","label":"Dc Type","values":["Dissertation"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Civil and Environmental Engineering"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Doctor of Philosophy in Environmental Engineering - (Ph.D.)"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Tantalum","Magnetron sputtering","Corrosion behavior","Coating","Environmental Engineering"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["https://digitalcommons.njit.edu/dissertations/674"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Tantalum coating by sputtering, one form of physical vapor deposition (PVD), has been investigated as a replacement for chromium coatings on gun bores to protect them from erosion and corrosion due to its high ductility and high corrosion resistance in aggressive environments. When deposited as a film on steel substrates by sputtering, either [alpha]-Ta, [beta]-Ta, or a mixture of both phases have been observed under varying deposition conditions. To evaluate corrosion behavior of Ta coatings, electrochemical impedance spectroscopy and potentiodynamic polarization were conducted as a function of coating thickness. The coating porosity was observed to decrease with increasing coating thickness and hence, coatings greater than 50 um exhibited corrosion resistance consistent with the bulk phase. Substrate roughness appeared to have little to no effect on the coating quality with respect to corrosion performance for 50 um [alpha]-Ta coatings. Coatings produced in full scale processes revealed that for Ta coating (< 50 um), the corrosion process was dominated by dissolution of the steel substrate through open pores, however, at the end of 5 days, coating degradation was not observed. In contrast, while open pores were not observed with the Cr coatings, the corrosion resistance decreased as a function of time under acidic conditions, resulting in dissolution and oxidation of Cr. Initially, however, the sputtered Cr coating exhibited improved corrosion resistance over the electrodeposited one, potentially due to its oxide film. The unique properties of tantalum oxide films produced from anodic oxidation and thermal oxidation demonstrates that the nanoscale oxide films formed exhibit an ordered local structure reflecting the very compact nature that enhances its corrosion resistance."]},{"key":"dc:title","label":"Title","values":["Corrosion studies on alpha tantalum and beta tantalum coated steel"]}]}],"canonical_facts":{"dc:contributor":["Lisa Axe","Trevor Tyson","Daniel Watts"],"dc:creator":["Maeng, Sung Min"],"dc:description.abstract":["Tantalum coating by sputtering, one form of physical vapor deposition (PVD), has been investigated as a replacement for chromium coatings on gun bores to protect them from erosion and corrosion due to its high ductility and high corrosion resistance in aggressive environments. When deposited as a film on steel substrates by sputtering, either [alpha]-Ta, [beta]-Ta, or a mixture of both phases have been observed under varying deposition conditions. To evaluate corrosion behavior of Ta coatings, electrochemical impedance spectroscopy and potentiodynamic polarization were conducted as a function of coating thickness. The coating porosity was observed to decrease with increasing coating thickness and hence, coatings greater than 50 um exhibited corrosion resistance consistent with the bulk phase. Substrate roughness appeared to have little to no effect on the coating quality with respect to corrosion performance for 50 um [alpha]-Ta coatings. Coatings produced in full scale processes revealed that for Ta coating (< 50 um), the corrosion process was dominated by dissolution of the steel substrate through open pores, however, at the end of 5 days, coating degradation was not observed. In contrast, while open pores were not observed with the Cr coatings, the corrosion resistance decreased as a function of time under acidic conditions, resulting in dissolution and oxidation of Cr. Initially, however, the sputtered Cr coating exhibited improved corrosion resistance over the electrodeposited one, potentially due to its oxide film. The unique properties of tantalum oxide films produced from anodic oxidation and thermal oxidation demonstrates that the nanoscale oxide films formed exhibit an ordered local structure reflecting the very compact nature that enhances its corrosion resistance."],"dc:identifier":["https://digitalcommons.njit.edu/dissertations/674"],"dc:subject":["Tantalum","Magnetron sputtering","Corrosion behavior","Coating","Environmental Engineering"],"dc:title":["Corrosion studies on alpha tantalum and beta tantalum coated steel"],"dc:type":["Dissertation"],"thesis:degree_discipline":["Civil and Environmental Engineering"],"thesis:degree_name":["Doctor of Philosophy in Environmental Engineering - (Ph.D.)"]},"updated_at":"2026-07-24T03:22:58Z"}