{"id":{"repo_id":"njit","oai_identifier":"oai:digitalcommons.njit.edu:dissertations-1313"},"canonical_url":"https://search.dev.ndltd.org/etd/njit/oai:digitalcommons.njit.edu:dissertations-1313","repository":{"repo_id":"njit","name":"NJIT","base_url":"https://digitalcommons.njit.edu/do/oai/"},"display":{"title":"Magnetic seeding aggregation to enhance the removal efficiency of TiO2 nanoparticles from water","abstract":"Engineered nanoparticles, such as titanium dioxide (TiO_2), are important building blocks for the evolution of nanotechnology in industries and commercial products. Ever so increasing use of the engineered nanoparticles is bound to result in a substantial fraction of these nanoparticles ending up in wastewater; or surface water and groundwater, which are sources of intake for drinking water treatment. Removal of these engineered nanoparticles in wastewater and drinking water treatment processes is a very important step towards the protection of environmental and public health as well as protecting water treatment units from fouling and other issues. Experimental studies showed TiO_2 removal efficiency of up to 75% using conventional coagulation and flocculation, but only with very high coagulant dosage and prolonged settling time. Clearly, conventional treatment will prove to be costly and impractical to treat TiO_2 in water. This research presents a method of using cationic surfactant-modified magnetite nanoparticles to enhance removal efficiency of TiO_2 nanoparticles in coagulation and flocculation. Magnetite nanoparticles can be recovered using an organic solvent (such as: cyclohexane) and recycled to minimize cost. Furthermore, effect of modeled parameters: pH, coagulant dose and type, settling time, and initial TiO_2 nanoparticle concentration on removal efficiency using the proposed method is also presented. Finally, the best operating ranges for values of modeled parameters, which if maintained will maximize removal efficiency were obtained for both conventional and proposed method. The method employed herein was able to increase the removal up to 90%+ at much lower coagulant dosage as compared to conventional coagulation and flocculation. The increase in removal efficiency is due to magnetic seeding aggregation. The outcome also indicated that the use of cationic surfactant-modified magnetite nanoparticles makes the coagulation and flocculation not only practical, but also cost efficient for removal of TiO_2 engineered nanoparticles. The results of this work will provide water and wastewater authorities with better understanding of the behavior of TiO_2 engineered nanoparticles in process streams and will help them come up with a better removal mechanism for TiO_2 engineered nanoparticles with least possible or no additional cost.","abstract_html":"Engineered nanoparticles, such as titanium dioxide (TiO_2), are important building blocks for the evolution of nanotechnology in industries and commercial products. Ever so increasing use of the engineered nanoparticles is bound to result in a substantial fraction of these nanoparticles ending up in wastewater; or surface water and groundwater, which are sources of intake for drinking water treatment. Removal of these engineered nanoparticles in wastewater and drinking water treatment processes is a very important step towards the protection of environmental and public health as well as protecting water treatment units from fouling and other issues. Experimental studies showed TiO_2 removal efficiency of up to 75% using conventional coagulation and flocculation, but only with very high coagulant dosage and prolonged settling time. Clearly, conventional treatment will prove to be costly and impractical to treat TiO_2 in water. This research presents a method of using cationic surfactant-modified magnetite nanoparticles to enhance removal efficiency of TiO_2 nanoparticles in coagulation and flocculation. Magnetite nanoparticles can be recovered using an organic solvent (such as: cyclohexane) and recycled to minimize cost. Furthermore, effect of modeled parameters: pH, coagulant dose and type, settling time, and initial TiO_2 nanoparticle concentration on removal efficiency using the proposed method is also presented. Finally, the best operating ranges for values of modeled parameters, which if maintained will maximize removal efficiency were obtained for both conventional and proposed method. The method employed herein was able to increase the removal up to 90%+ at much lower coagulant dosage as compared to conventional coagulation and flocculation. The increase in removal efficiency is due to magnetic seeding aggregation. The outcome also indicated that the use of cationic surfactant-modified magnetite nanoparticles makes the coagulation and flocculation not only practical, but also cost efficient for removal of TiO_2 engineered nanoparticles. The results of this work will provide water and wastewater authorities with better understanding of the behavior of TiO_2 engineered nanoparticles in process streams and will help them come up with a better removal mechanism for TiO_2 engineered nanoparticles with least possible or no additional cost.","abstract_has_math":false,"creators":["Borgaonkar, Ashish Dhananjay"],"institution":null,"degree_name":"Doctor of Philosophy in Environmental Engineering - (Ph.D.)","degree_level":null,"degree_discipline":"Civil and Environmental Engineering","degree_department":null,"school":null,"contributors":["Taha F. Marhaba","Tanapon Phenrat","Sima Bagheri"],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2011,"date_issued":"2011-05-31T07:00:00Z","date_published":"2011-05-31T07:00:00Z","updated_at":"2026-07-24T03:22:14Z","subjects":["TiO2 engineered nanoparticles","Magnetic seeding aggregation","Water treatment","Removal efficiency","Coagulation & flocculation","Environmental Engineering"],"languages":[],"rights":[],"rights_urls":[],"identifier_entries":[]},"links":{"outbound_url":"https://digitalcommons.njit.edu/dissertations/258","outbound_label":"Repository record","outbound_source":"dc:identifier"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Taha F. Marhaba","Tanapon Phenrat","Sima Bagheri"]},{"key":"dc:creator","label":"Author","values":["Borgaonkar, Ashish Dhananjay"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:type","label":"Dc Type","values":["Dissertation"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Civil and Environmental Engineering"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Doctor of Philosophy in Environmental Engineering - (Ph.D.)"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TiO2 engineered nanoparticles","Magnetic seeding aggregation","Water treatment","Removal efficiency","Coagulation & flocculation","Environmental Engineering"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["https://digitalcommons.njit.edu/dissertations/258"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Engineered nanoparticles, such as titanium dioxide (TiO_2), are important building blocks for the evolution of nanotechnology in industries and commercial products. Ever so increasing use of the engineered nanoparticles is bound to result in a substantial fraction of these nanoparticles ending up in wastewater; or surface water and groundwater, which are sources of intake for drinking water treatment. Removal of these engineered nanoparticles in wastewater and drinking water treatment processes is a very important step towards the protection of environmental and public health as well as protecting water treatment units from fouling and other issues. Experimental studies showed TiO_2 removal efficiency of up to 75% using conventional coagulation and flocculation, but only with very high coagulant dosage and prolonged settling time. Clearly, conventional treatment will prove to be costly and impractical to treat TiO_2 in water. This research presents a method of using cationic surfactant-modified magnetite nanoparticles to enhance removal efficiency of TiO_2 nanoparticles in coagulation and flocculation. Magnetite nanoparticles can be recovered using an organic solvent (such as: cyclohexane) and recycled to minimize cost. Furthermore, effect of modeled parameters: pH, coagulant dose and type, settling time, and initial TiO_2 nanoparticle concentration on removal efficiency using the proposed method is also presented. Finally, the best operating ranges for values of modeled parameters, which if maintained will maximize removal efficiency were obtained for both conventional and proposed method. The method employed herein was able to increase the removal up to 90%+ at much lower coagulant dosage as compared to conventional coagulation and flocculation. The increase in removal efficiency is due to magnetic seeding aggregation. The outcome also indicated that the use of cationic surfactant-modified magnetite nanoparticles makes the coagulation and flocculation not only practical, but also cost efficient for removal of TiO_2 engineered nanoparticles. The results of this work will provide water and wastewater authorities with better understanding of the behavior of TiO_2 engineered nanoparticles in process streams and will help them come up with a better removal mechanism for TiO_2 engineered nanoparticles with least possible or no additional cost."]},{"key":"dc:title","label":"Title","values":["Magnetic seeding aggregation to enhance the removal efficiency of TiO2 nanoparticles from water"]}]}],"canonical_facts":{"dc:contributor":["Taha F. Marhaba","Tanapon Phenrat","Sima Bagheri"],"dc:creator":["Borgaonkar, Ashish Dhananjay"],"dc:description.abstract":["Engineered nanoparticles, such as titanium dioxide (TiO_2), are important building blocks for the evolution of nanotechnology in industries and commercial products. Ever so increasing use of the engineered nanoparticles is bound to result in a substantial fraction of these nanoparticles ending up in wastewater; or surface water and groundwater, which are sources of intake for drinking water treatment. Removal of these engineered nanoparticles in wastewater and drinking water treatment processes is a very important step towards the protection of environmental and public health as well as protecting water treatment units from fouling and other issues. Experimental studies showed TiO_2 removal efficiency of up to 75% using conventional coagulation and flocculation, but only with very high coagulant dosage and prolonged settling time. Clearly, conventional treatment will prove to be costly and impractical to treat TiO_2 in water. This research presents a method of using cationic surfactant-modified magnetite nanoparticles to enhance removal efficiency of TiO_2 nanoparticles in coagulation and flocculation. Magnetite nanoparticles can be recovered using an organic solvent (such as: cyclohexane) and recycled to minimize cost. Furthermore, effect of modeled parameters: pH, coagulant dose and type, settling time, and initial TiO_2 nanoparticle concentration on removal efficiency using the proposed method is also presented. Finally, the best operating ranges for values of modeled parameters, which if maintained will maximize removal efficiency were obtained for both conventional and proposed method. The method employed herein was able to increase the removal up to 90%+ at much lower coagulant dosage as compared to conventional coagulation and flocculation. The increase in removal efficiency is due to magnetic seeding aggregation. The outcome also indicated that the use of cationic surfactant-modified magnetite nanoparticles makes the coagulation and flocculation not only practical, but also cost efficient for removal of TiO_2 engineered nanoparticles. The results of this work will provide water and wastewater authorities with better understanding of the behavior of TiO_2 engineered nanoparticles in process streams and will help them come up with a better removal mechanism for TiO_2 engineered nanoparticles with least possible or no additional cost."],"dc:identifier":["https://digitalcommons.njit.edu/dissertations/258"],"dc:subject":["TiO2 engineered nanoparticles","Magnetic seeding aggregation","Water treatment","Removal efficiency","Coagulation & flocculation","Environmental Engineering"],"dc:title":["Magnetic seeding aggregation to enhance the removal efficiency of TiO2 nanoparticles from water"],"dc:type":["Dissertation"],"thesis:degree_discipline":["Civil and Environmental Engineering"],"thesis:degree_name":["Doctor of Philosophy in Environmental Engineering - (Ph.D.)"]},"updated_at":"2026-07-24T03:22:14Z"}