{"id":{"repo_id":"must-thes","oai_identifier":"oai:scholarsmine.mst.edu:doctoral_dissertations-3012"},"canonical_url":"https://search.dev.ndltd.org/etd/must-thes/oai:scholarsmine.mst.edu:doctoral_dissertations-3012","repository":{"repo_id":"must-thes","name":"Missouri University of Science and Technology","base_url":"https://scholarsmine.mst.edu/do/oai/"},"display":{"title":"Stress measurement and development of zirconium diboride-silicon carbide ceramics","abstract":"\"Research presented in this dissertation focused on the production of ZrB₂-SiC composites and their characterization; in particular their mechanical properties and thermally generated residual stresses. Thermally generated stresses were measured using Raman spectroscopy as well as both neutron and x-ray diffraction. For 70 vol% ZrB₂ - 30 vol% SiC composites neutron diffraction revealed that the SiC phase was under ~880 MPa compressive stress and the ZrB₂ phase was under ~450 MPa tension at room temperature. It was also discovered that stresses began to accumulate at ~1400 ⁰C upon cooling from the processing temperature (1900 ⁰C -2000 ⁰C). Raman spectroscopy and x-ray diffractions agreed well with one another and showed the stresses in the SiC phase on the surface of the samples to be ~350 MPa; lower than that in the bulk as measured by neutron diffraction. It has also been shown that annealing composites at temperatures below 1400 ⁰C, particularly while under pressure can partially relieve these stresses leading to increases in mechanical strength of as much as 30%. The role of the particle size of the SiC phase was also investigated. For SiC particle sizes smaller than 11.5 µm, the failure strengths of the composites followed a 1/c1/2 type relationship as predicted by Griffith. Above that particle size however, strength, modulus, and hardness all decreased rapidly. It was discovered that for SiC particle sizes larger than 11.5 µm microcracking occurred resulting in the decrease of the measured mechanical properties\"--Abstract, page iv.","abstract_html":""Research presented in this dissertation focused on the production of ZrB₂-SiC composites and their characterization; in particular their mechanical properties and thermally generated residual stresses. Thermally generated stresses were measured using Raman spectroscopy as well as both neutron and x-ray diffraction. For 70 vol% ZrB₂ - 30 vol% SiC composites neutron diffraction revealed that the SiC phase was under ~880 MPa compressive stress and the ZrB₂ phase was under ~450 MPa tension at room temperature. It was also discovered that stresses began to accumulate at ~1400 ⁰C upon cooling from the processing temperature (1900 ⁰C -2000 ⁰C). Raman spectroscopy and x-ray diffractions agreed well with one another and showed the stresses in the SiC phase on the surface of the samples to be ~350 MPa; lower than that in the bulk as measured by neutron diffraction. It has also been shown that annealing composites at temperatures below 1400 ⁰C, particularly while under pressure can partially relieve these stresses leading to increases in mechanical strength of as much as 30%. The role of the particle size of the SiC phase was also investigated. For SiC particle sizes smaller than 11.5 µm, the failure strengths of the composites followed a 1/c1/2 type relationship as predicted by Griffith. Above that particle size however, strength, modulus, and hardness all decreased rapidly. It was discovered that for SiC particle sizes larger than 11.5 µm microcracking occurred resulting in the decrease of the measured mechanical properties"--Abstract, page iv.","abstract_has_math":false,"creators":["Watts, Jeremy Lee"],"institution":"Missouri University of Science and Technology","degree_name":"Ph. D. in Materials Science and Engineering","degree_level":null,"degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2016,"date_issued":"2016-02-10T08:00:00Z","date_published":"2016-02-10T08:00:00Z","updated_at":"2026-07-24T03:20:12Z","subjects":["Materials Science and Engineering"],"languages":[],"rights":[],"rights_urls":[],"identifier_entries":[]},"links":{"outbound_url":"https://scholarsmine.mst.edu/doctoral_dissertations/2010","outbound_label":"Repository record","outbound_source":"dc:identifier"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:creator","label":"Author","values":["Watts, Jeremy Lee"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.available","label":"Dc Date Available","values":["2016-02-10T08:00:00Z"]},{"key":"dc:type","label":"Dc Type","values":["Dissertation - Open Access"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Ph. D. in Materials Science and Engineering"]},{"key":"thesis:institution_name","label":"Thesis Institution Name","values":["Missouri University of Science and Technology"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Materials Science and Engineering"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["https://scholarsmine.mst.edu/doctoral_dissertations/2010"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["\"Research presented in this dissertation focused on the production of ZrB₂-SiC composites and their characterization; in particular their mechanical properties and thermally generated residual stresses. Thermally generated stresses were measured using Raman spectroscopy as well as both neutron and x-ray diffraction. For 70 vol% ZrB₂ - 30 vol% SiC composites neutron diffraction revealed that the SiC phase was under ~880 MPa compressive stress and the ZrB₂ phase was under ~450 MPa tension at room temperature. It was also discovered that stresses began to accumulate at ~1400 ⁰C upon cooling from the processing temperature (1900 ⁰C -2000 ⁰C). Raman spectroscopy and x-ray diffractions agreed well with one another and showed the stresses in the SiC phase on the surface of the samples to be ~350 MPa; lower than that in the bulk as measured by neutron diffraction. It has also been shown that annealing composites at temperatures below 1400 ⁰C, particularly while under pressure can partially relieve these stresses leading to increases in mechanical strength of as much as 30%. The role of the particle size of the SiC phase was also investigated. For SiC particle sizes smaller than 11.5 µm, the failure strengths of the composites followed a 1/c1/2 type relationship as predicted by Griffith. Above that particle size however, strength, modulus, and hardness all decreased rapidly. It was discovered that for SiC particle sizes larger than 11.5 µm microcracking occurred resulting in the decrease of the measured mechanical properties\"--Abstract, page iv."]},{"key":"dc:title","label":"Title","values":["Stress measurement and development of zirconium diboride-silicon carbide ceramics"]}]}],"canonical_facts":{"dc:creator":["Watts, Jeremy Lee"],"dc:date.available":["2016-02-10T08:00:00Z"],"dc:description.abstract":["\"Research presented in this dissertation focused on the production of ZrB₂-SiC composites and their characterization; in particular their mechanical properties and thermally generated residual stresses. Thermally generated stresses were measured using Raman spectroscopy as well as both neutron and x-ray diffraction. For 70 vol% ZrB₂ - 30 vol% SiC composites neutron diffraction revealed that the SiC phase was under ~880 MPa compressive stress and the ZrB₂ phase was under ~450 MPa tension at room temperature. It was also discovered that stresses began to accumulate at ~1400 ⁰C upon cooling from the processing temperature (1900 ⁰C -2000 ⁰C). Raman spectroscopy and x-ray diffractions agreed well with one another and showed the stresses in the SiC phase on the surface of the samples to be ~350 MPa; lower than that in the bulk as measured by neutron diffraction. It has also been shown that annealing composites at temperatures below 1400 ⁰C, particularly while under pressure can partially relieve these stresses leading to increases in mechanical strength of as much as 30%. The role of the particle size of the SiC phase was also investigated. For SiC particle sizes smaller than 11.5 µm, the failure strengths of the composites followed a 1/c1/2 type relationship as predicted by Griffith. Above that particle size however, strength, modulus, and hardness all decreased rapidly. It was discovered that for SiC particle sizes larger than 11.5 µm microcracking occurred resulting in the decrease of the measured mechanical properties\"--Abstract, page iv."],"dc:identifier":["https://scholarsmine.mst.edu/doctoral_dissertations/2010"],"dc:subject":["Materials Science and Engineering"],"dc:title":["Stress measurement and development of zirconium diboride-silicon carbide ceramics"],"dc:type":["Dissertation - Open Access"],"thesis:degree_name":["Ph. D. in Materials Science and Engineering"],"thesis:institution_name":["Missouri University of Science and Technology"]},"updated_at":"2026-07-24T03:20:12Z"}