{"id":{"repo_id":"mit","oai_identifier":"oai:dspace.mit.edu:1721.1/9293"},"canonical_url":"https://search.dev.ndltd.org/etd/mit/oai:dspace.mit.edu:1721.1/9293","repository":{"repo_id":"mit","name":"MIT","base_url":"https://dspace.mit.edu/oai/request"},"display":{"title":"Development and test of a microfabricated bipropellant rocket engine","abstract":"The development of high aspect-ratio, high precision micromachining in silicon or silicon carbide suggests the feasibility of rnicrofabricated, high chamber pressure chemical rocket engines. Such an engine, approximately 20x15x3 mm in size, would produce about three pounds of thrust using 300 sec I sp propellants. As part of the present work, the feasibility of these engines has been investigated and a liquid-cooled, pressure-fed thrust chamber has been designed, fabricated, and tested to evaluate the feasibility of the concept. The results of the tests to date using oxygen and methane as propellants support the feasibility of the concept, producing a maximum thrust of 1 N at a chamber pressure of 12 atm. Given the 1.2 gram mass of the thrust chamber, this corresponds to a thrust-to-weight ratio of 85:1. The characteristic exhaust velocity, c*, a measure of combustion effectiveness, appears to be nearly independent of chamber pressure, indicating that chemical reaction rates are not limiting the combustion. Additionally, when effects of chamber heat loss are included, c* appears to approach its predicted ideal value, indicating that the transport and mixing of propellants in the combustion chamber is of the right order to provide for complete combustion. The thrust chamber was fabricated by etching the required patterns into each side of six 0.5 mm thick silicon wafers, and then diffusion bonding the six wafers together to create the one-piece thrust chamber. A packaging technique is presented to interface high pressure and high temperature fluids to the silicon rocket engine chip. Additionally, initial modelling work has lead to the development of a methodology for mapping the feasible design space of microrocket engines, and for optimizing the performance of such systems given current limitations in microfabrication technology.","abstract_html":"The development of high aspect-ratio, high precision micromachining in silicon or silicon carbide suggests the feasibility of rnicrofabricated, high chamber pressure chemical rocket engines. Such an engine, approximately 20x15x3 mm in size, would produce about three pounds of thrust using 300 sec I sp propellants. As part of the present work, the feasibility of these engines has been investigated and a liquid-cooled, pressure-fed thrust chamber has been designed, fabricated, and tested to evaluate the feasibility of the concept. The results of the tests to date using oxygen and methane as propellants support the feasibility of the concept, producing a maximum thrust of 1 N at a chamber pressure of 12 atm. Given the 1.2 gram mass of the thrust chamber, this corresponds to a thrust-to-weight ratio of 85:1. The characteristic exhaust velocity, c*, a measure of combustion effectiveness, appears to be nearly independent of chamber pressure, indicating that chemical reaction rates are not limiting the combustion. Additionally, when effects of chamber heat loss are included, c* appears to approach its predicted ideal value, indicating that the transport and mixing of propellants in the combustion chamber is of the right order to provide for complete combustion. The thrust chamber was fabricated by etching the required patterns into each side of six 0.5 mm thick silicon wafers, and then diffusion bonding the six wafers together to create the one-piece thrust chamber. A packaging technique is presented to interface high pressure and high temperature fluids to the silicon rocket engine chip. Additionally, initial modelling work has lead to the development of a methodology for mapping the feasible design space of microrocket engines, and for optimizing the performance of such systems given current limitations in microfabrication technology.","abstract_has_math":false,"creators":["London, Adam Pollok"],"institution":"Massachusetts Institute of Technology","degree_name":null,"degree_level":null,"degree_discipline":null,"degree_department":"Massachusetts Institute of Technology. Dept. of Aeronautics and Astronautics.","school":null,"contributors":[],"advisors":["Jack L. Kerrebrock."],"committee_chairs":[],"committee_members":[],"year":2000,"date_issued":"2000","date_published":"2000","updated_at":"2026-07-22T22:21:59Z","subjects":["Aeronautics and Astronautics."],"languages":["eng"],"rights":["M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission."],"rights_urls":["http://dspace.mit.edu/handle/1721.1/7582"],"identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/1721.1/9293","outbound_label":"Handle","outbound_source":"dc:identifier.uri"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.advisor","label":"Advisor","values":["Jack L. Kerrebrock."]},{"key":"dc:contributor.department","label":"Department","values":["Massachusetts Institute of Technology. Dept. of Aeronautics and Astronautics."]},{"key":"dc:contributor.other","label":"Dc Contributor Other","values":["Massachusetts Institute of Technology. Dept. of Aeronautics and Astronautics."]},{"key":"dc:creator","label":"Author","values":["London, Adam Pollok"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2005-08-23T12:00:00Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2005-08-23T12:00:00Z"]},{"key":"dc:date.issued","label":"Date","values":["2000"]},{"key":"dc:publisher","label":"Institution","values":["Massachusetts Institute of Technology"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Aeronautics and Astronautics."]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["eng"]},{"key":"dc:rights","label":"Dc Rights","values":["M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission."]},{"key":"dc:rights.uri","label":"Rights URI","values":["http://dspace.mit.edu/handle/1721.1/7582"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://hdl.handle.net/1721.1/9293"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description","label":"Description","values":["Thesis (Ph.D.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 2000.","Includes bibliographical references (p. 253-255)."]},{"key":"dc:description.abstract","label":"Abstract","values":["The development of high aspect-ratio, high precision micromachining in silicon or silicon carbide suggests the feasibility of rnicrofabricated, high chamber pressure chemical rocket engines. Such an engine, approximately 20x15x3 mm in size, would produce about three pounds of thrust using 300 sec I sp propellants. As part of the present work, the feasibility of these engines has been investigated and a liquid-cooled, pressure-fed thrust chamber has been designed, fabricated, and tested to evaluate the feasibility of the concept. The results of the tests to date using oxygen and methane as propellants support the feasibility of the concept, producing a maximum thrust of 1 N at a chamber pressure of 12 atm. Given the 1.2 gram mass of the thrust chamber, this corresponds to a thrust-to-weight ratio of 85:1. The characteristic exhaust velocity, c*, a measure of combustion effectiveness, appears to be nearly independent of chamber pressure, indicating that chemical reaction rates are not limiting the combustion. Additionally, when effects of chamber heat loss are included, c* appears to approach its predicted ideal value, indicating that the transport and mixing of propellants in the combustion chamber is of the right order to provide for complete combustion. The thrust chamber was fabricated by etching the required patterns into each side of six 0.5 mm thick silicon wafers, and then diffusion bonding the six wafers together to create the one-piece thrust chamber. A packaging technique is presented to interface high pressure and high temperature fluids to the silicon rocket engine chip. Additionally, initial modelling work has lead to the development of a methodology for mapping the feasible design space of microrocket engines, and for optimizing the performance of such systems given current limitations in microfabrication technology."]},{"key":"dc:description.degree","label":"Dc Description Degree","values":["Ph.D."]},{"key":"dc:format.mimetype","label":"Dc Format Mimetype","values":["application/pdf"]},{"key":"dc:title","label":"Title","values":["Development and test of a microfabricated bipropellant rocket engine"]}]}],"canonical_facts":{"dc:contributor.advisor":["Jack L. Kerrebrock."],"dc:contributor.department":["Massachusetts Institute of Technology. Dept. of Aeronautics and Astronautics."],"dc:contributor.other":["Massachusetts Institute of Technology. Dept. of Aeronautics and Astronautics."],"dc:creator":["London, Adam Pollok"],"dc:date.accessioned":["2005-08-23T12:00:00Z"],"dc:date.available":["2005-08-23T12:00:00Z"],"dc:date.issued":["2000"],"dc:description":["Thesis (Ph.D.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 2000.","Includes bibliographical references (p. 253-255)."],"dc:description.abstract":["The development of high aspect-ratio, high precision micromachining in silicon or silicon carbide suggests the feasibility of rnicrofabricated, high chamber pressure chemical rocket engines. Such an engine, approximately 20x15x3 mm in size, would produce about three pounds of thrust using 300 sec I sp propellants. As part of the present work, the feasibility of these engines has been investigated and a liquid-cooled, pressure-fed thrust chamber has been designed, fabricated, and tested to evaluate the feasibility of the concept. The results of the tests to date using oxygen and methane as propellants support the feasibility of the concept, producing a maximum thrust of 1 N at a chamber pressure of 12 atm. Given the 1.2 gram mass of the thrust chamber, this corresponds to a thrust-to-weight ratio of 85:1. The characteristic exhaust velocity, c*, a measure of combustion effectiveness, appears to be nearly independent of chamber pressure, indicating that chemical reaction rates are not limiting the combustion. Additionally, when effects of chamber heat loss are included, c* appears to approach its predicted ideal value, indicating that the transport and mixing of propellants in the combustion chamber is of the right order to provide for complete combustion. The thrust chamber was fabricated by etching the required patterns into each side of six 0.5 mm thick silicon wafers, and then diffusion bonding the six wafers together to create the one-piece thrust chamber. A packaging technique is presented to interface high pressure and high temperature fluids to the silicon rocket engine chip. Additionally, initial modelling work has lead to the development of a methodology for mapping the feasible design space of microrocket engines, and for optimizing the performance of such systems given current limitations in microfabrication technology."],"dc:description.degree":["Ph.D."],"dc:format.mimetype":["application/pdf"],"dc:identifier.uri":["http://hdl.handle.net/1721.1/9293"],"dc:language.iso":["eng"],"dc:publisher":["Massachusetts Institute of Technology"],"dc:rights":["M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission."],"dc:rights.uri":["http://dspace.mit.edu/handle/1721.1/7582"],"dc:subject":["Aeronautics and Astronautics."],"dc:title":["Development and test of a microfabricated bipropellant rocket engine"],"dc:type":["Thesis"]},"updated_at":"2026-07-22T22:21:59Z"}