{"id":{"repo_id":"mit","oai_identifier":"oai:dspace.mit.edu:1721.1/9056"},"canonical_url":"https://search.dev.ndltd.org/etd/mit/oai:dspace.mit.edu:1721.1/9056","repository":{"repo_id":"mit","name":"MIT","base_url":"https://dspace.mit.edu/oai/request"},"display":{"title":"The effect of spark timing on residual gas fraction","abstract":"Residual gas tests were done on a 2.4 liter commercial engine to find a correlation for the effect on spark timing on residual gas fraction. The tests were done by sampling the charge mass during a non-firing cycle through a small hole into cylinder 4. The residual gas fraction was determined by measuring the CO2 content of the sample. The experiments were conducted for a variety of different spark timing and valve timing settings. Since the data was taken over a limited range, a physical basis for a correlation was developed. Following the approach used in a previous modeling effort, the residual gas fraction was modeled as the sum of two contributing factors: backflow from the exhaust port to the cylinder during valve overlap and gas trapped inside the cylinder at the time of intake valve open. Additionally, the phenomenon of choked backflow was introduced in the model. Based on the data, a correlation was developed that estimates the residual gas fraction as a function of: intake to exhaust pressure ratio (Pi/Pe), valve profile, engine speed, compression ratio, and spark timing.","abstract_html":"Residual gas tests were done on a 2.4 liter commercial engine to find a correlation for the effect on spark timing on residual gas fraction. The tests were done by sampling the charge mass during a non-firing cycle through a small hole into cylinder 4. The residual gas fraction was determined by measuring the CO2 content of the sample. The experiments were conducted for a variety of different spark timing and valve timing settings. Since the data was taken over a limited range, a physical basis for a correlation was developed. Following the approach used in a previous modeling effort, the residual gas fraction was modeled as the sum of two contributing factors: backflow from the exhaust port to the cylinder during valve overlap and gas trapped inside the cylinder at the time of intake valve open. Additionally, the phenomenon of choked backflow was introduced in the model. Based on the data, a correlation was developed that estimates the residual gas fraction as a function of: intake to exhaust pressure ratio (Pi/Pe), valve profile, engine speed, compression ratio, and spark timing.","abstract_has_math":false,"creators":["Waero, Rolf Rikard, 1974-"],"institution":"Massachusetts Institute of Technology","degree_name":null,"degree_level":null,"degree_discipline":null,"degree_department":"Massachusetts Institute of Technology. Dept. of Mechanical Engineering.","school":null,"contributors":[],"advisors":["Wai K. Cheng."],"committee_chairs":[],"committee_members":[],"year":2000,"date_issued":"2000","date_published":"2000","updated_at":"2026-07-22T22:21:19Z","subjects":["Mechanical Engineering."],"languages":["eng"],"rights":["M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission."],"rights_urls":["http://dspace.mit.edu/handle/1721.1/7582"],"identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/1721.1/9056","outbound_label":"Handle","outbound_source":"dc:identifier.uri"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.advisor","label":"Advisor","values":["Wai K. Cheng."]},{"key":"dc:contributor.department","label":"Department","values":["Massachusetts Institute of Technology. Dept. of Mechanical Engineering."]},{"key":"dc:contributor.other","label":"Dc Contributor Other","values":["Massachusetts Institute of Technology. Dept. of Mechanical Engineering."]},{"key":"dc:creator","label":"Author","values":["Waero, Rolf Rikard, 1974-"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2005-08-24T19:18:26Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2005-08-24T19:18:26Z"]},{"key":"dc:date.issued","label":"Date","values":["2000"]},{"key":"dc:publisher","label":"Institution","values":["Massachusetts Institute of Technology"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Mechanical Engineering."]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["eng"]},{"key":"dc:rights","label":"Dc Rights","values":["M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission."]},{"key":"dc:rights.uri","label":"Rights URI","values":["http://dspace.mit.edu/handle/1721.1/7582"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://hdl.handle.net/1721.1/9056"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description","label":"Description","values":["Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2000.","Includes bibliographical references (p. 37)."]},{"key":"dc:description.abstract","label":"Abstract","values":["Residual gas tests were done on a 2.4 liter commercial engine to find a correlation for the effect on spark timing on residual gas fraction. The tests were done by sampling the charge mass during a non-firing cycle through a small hole into cylinder 4. The residual gas fraction was determined by measuring the CO2 content of the sample. The experiments were conducted for a variety of different spark timing and valve timing settings. Since the data was taken over a limited range, a physical basis for a correlation was developed. Following the approach used in a previous modeling effort, the residual gas fraction was modeled as the sum of two contributing factors: backflow from the exhaust port to the cylinder during valve overlap and gas trapped inside the cylinder at the time of intake valve open. Additionally, the phenomenon of choked backflow was introduced in the model. Based on the data, a correlation was developed that estimates the residual gas fraction as a function of: intake to exhaust pressure ratio (Pi/Pe), valve profile, engine speed, compression ratio, and spark timing."]},{"key":"dc:description.degree","label":"Dc Description Degree","values":["S.M."]},{"key":"dc:format.mimetype","label":"Dc Format Mimetype","values":["application/pdf"]},{"key":"dc:title","label":"Title","values":["The effect of spark timing on residual gas fraction"]}]}],"canonical_facts":{"dc:contributor.advisor":["Wai K. Cheng."],"dc:contributor.department":["Massachusetts Institute of Technology. Dept. of Mechanical Engineering."],"dc:contributor.other":["Massachusetts Institute of Technology. Dept. of Mechanical Engineering."],"dc:creator":["Waero, Rolf Rikard, 1974-"],"dc:date.accessioned":["2005-08-24T19:18:26Z"],"dc:date.available":["2005-08-24T19:18:26Z"],"dc:date.issued":["2000"],"dc:description":["Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2000.","Includes bibliographical references (p. 37)."],"dc:description.abstract":["Residual gas tests were done on a 2.4 liter commercial engine to find a correlation for the effect on spark timing on residual gas fraction. The tests were done by sampling the charge mass during a non-firing cycle through a small hole into cylinder 4. The residual gas fraction was determined by measuring the CO2 content of the sample. The experiments were conducted for a variety of different spark timing and valve timing settings. Since the data was taken over a limited range, a physical basis for a correlation was developed. Following the approach used in a previous modeling effort, the residual gas fraction was modeled as the sum of two contributing factors: backflow from the exhaust port to the cylinder during valve overlap and gas trapped inside the cylinder at the time of intake valve open. Additionally, the phenomenon of choked backflow was introduced in the model. Based on the data, a correlation was developed that estimates the residual gas fraction as a function of: intake to exhaust pressure ratio (Pi/Pe), valve profile, engine speed, compression ratio, and spark timing."],"dc:description.degree":["S.M."],"dc:format.mimetype":["application/pdf"],"dc:identifier.uri":["http://hdl.handle.net/1721.1/9056"],"dc:language.iso":["eng"],"dc:publisher":["Massachusetts Institute of Technology"],"dc:rights":["M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission."],"dc:rights.uri":["http://dspace.mit.edu/handle/1721.1/7582"],"dc:subject":["Mechanical Engineering."],"dc:title":["The effect of spark timing on residual gas fraction"],"dc:type":["Thesis"]},"updated_at":"2026-07-22T22:21:19Z"}