{"id":{"repo_id":"mit","oai_identifier":"oai:dspace.mit.edu:1721.1/8442"},"canonical_url":"https://search.dev.ndltd.org/etd/mit/oai:dspace.mit.edu:1721.1/8442","repository":{"repo_id":"mit","name":"MIT","base_url":"https://dspace.mit.edu/oai/request"},"display":{"title":"Dynamic actuation properties of Ni-Mn-Ga ferromagnetic shape memory alloys","abstract":"Dynamic magnetic-field-induced strain actuation of up to 3% with a frequency bandwidth of least 500 Hz in Ni48.5Mn29.5Ga21 ferromagnetic shape memory alloys (FMSAs) is achieved. Hardware was designed and constructed to measure frequency bandwidth, magnetic-field-induced strain, stress and magnetization driven from an applied magnetic field. The bandwidth in this investigation was only limited by inductive reactance of the hardware, not by fundamental limitations of Ni-Mn-Ga. Degradation of the peak dynamic actuation strain occurred from 3.0% to 2.6% with increasing number of cycles from Nz1,000 to N 100,000. Measurement of strain, stress, and magnetization driven by a magnetic field permitted the comparison of measured properties versus properly defined thermodynamic properties. The peak thermodynamic piezomagnetic coefficient is d3, 1,= 2.5 x 10-7m / A compared to the experimental slope, dE/dH, of 1.0 x 10-7 m / A at N-1,000 cycles and 1.4 x 10-7 m / A at N-100,000 cycles, respectively. The thermodynamic piezomagnetic coefficient is five times greater than Terfenol-D with d31 = 5.0 x 10-m / A. The magnetic susceptibility varies between 3-10, while the twinning stiffness varies between 30-40 MPa within the average bias stress range of 0.3 to 2.8 MPa. At optimum fields and bias stresses, the mechanical energy density during cyclic deformation was 65 kJ/m3 at the expense of 20 kJ/m3 lost An important first observation of dynamic stress vs. field behavior is understood by an extension of a magnetomechanical phenomenological model.","abstract_html":"Dynamic magnetic-field-induced strain actuation of up to 3% with a frequency bandwidth of least 500 Hz in Ni48.5Mn29.5Ga21 ferromagnetic shape memory alloys (FMSAs) is achieved. Hardware was designed and constructed to measure frequency bandwidth, magnetic-field-induced strain, stress and magnetization driven from an applied magnetic field. The bandwidth in this investigation was only limited by inductive reactance of the hardware, not by fundamental limitations of Ni-Mn-Ga. Degradation of the peak dynamic actuation strain occurred from 3.0% to 2.6% with increasing number of cycles from Nz1,000 to N 100,000. Measurement of strain, stress, and magnetization driven by a magnetic field permitted the comparison of measured properties versus properly defined thermodynamic properties. The peak thermodynamic piezomagnetic coefficient is d3, 1,= 2.5 x 10-7m / A compared to the experimental slope, dE/dH, of 1.0 x 10-7 m / A at N-1,000 cycles and 1.4 x 10-7 m / A at N-100,000 cycles, respectively. The thermodynamic piezomagnetic coefficient is five times greater than Terfenol-D with d31 = 5.0 x 10-m / A. The magnetic susceptibility varies between 3-10, while the twinning stiffness varies between 30-40 MPa within the average bias stress range of 0.3 to 2.8 MPa. At optimum fields and bias stresses, the mechanical energy density during cyclic deformation was 65 kJ/m3 at the expense of 20 kJ/m3 lost An important first observation of dynamic stress vs. field behavior is understood by an extension of a magnetomechanical phenomenological model.","abstract_has_math":false,"creators":["Henry, Christopher P. (Christopher Paul), 1974-"],"institution":"Massachusetts Institute of Technology","degree_name":null,"degree_level":null,"degree_discipline":null,"degree_department":"Massachusetts Institute of Technology. Department of Materials Science and Engineering","school":null,"contributors":[],"advisors":["Samuel M. Allen and Robert C. O'Handley."],"committee_chairs":[],"committee_members":[],"year":2002,"date_issued":"2002","date_published":"2002","updated_at":"2026-07-22T22:20:51Z","subjects":["Materials Science and Engineering."],"languages":["eng"],"rights":["M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission."],"rights_urls":["http://dspace.mit.edu/handle/1721.1/7582"],"identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/1721.1/8442","outbound_label":"Handle","outbound_source":"dc:identifier.uri"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.advisor","label":"Advisor","values":["Samuel M. Allen and Robert C. O'Handley."]},{"key":"dc:contributor.department","label":"Department","values":["Massachusetts Institute of Technology. Department of Materials Science and Engineering"]},{"key":"dc:contributor.other","label":"Dc Contributor Other","values":["Massachusetts Institute of Technology. Dept. of Materials Science and Engineering."]},{"key":"dc:creator","label":"Author","values":["Henry, Christopher P. (Christopher Paul), 1974-"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2005-08-23T20:13:14Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2005-08-23T20:13:14Z"]},{"key":"dc:date.issued","label":"Date","values":["2002"]},{"key":"dc:publisher","label":"Institution","values":["Massachusetts Institute of Technology"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Materials Science and Engineering."]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["eng"]},{"key":"dc:rights","label":"Dc Rights","values":["M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission."]},{"key":"dc:rights.uri","label":"Rights URI","values":["http://dspace.mit.edu/handle/1721.1/7582"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://hdl.handle.net/1721.1/8442"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description","label":"Description","values":["Thesis (Ph.D.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 2002.","Includes bibliographical references (leaves 198-201)."]},{"key":"dc:description.abstract","label":"Abstract","values":["Dynamic magnetic-field-induced strain actuation of up to 3% with a frequency bandwidth of least 500 Hz in Ni48.5Mn29.5Ga21 ferromagnetic shape memory alloys (FMSAs) is achieved. Hardware was designed and constructed to measure frequency bandwidth, magnetic-field-induced strain, stress and magnetization driven from an applied magnetic field. The bandwidth in this investigation was only limited by inductive reactance of the hardware, not by fundamental limitations of Ni-Mn-Ga. Degradation of the peak dynamic actuation strain occurred from 3.0% to 2.6% with increasing number of cycles from Nz1,000 to N 100,000. Measurement of strain, stress, and magnetization driven by a magnetic field permitted the comparison of measured properties versus properly defined thermodynamic properties. The peak thermodynamic piezomagnetic coefficient is d3, 1,= 2.5 x 10-7m / A compared to the experimental slope, dE/dH, of 1.0 x 10-7 m / A at N-1,000 cycles and 1.4 x 10-7 m / A at N-100,000 cycles, respectively. The thermodynamic piezomagnetic coefficient is five times greater than Terfenol-D with d31 = 5.0 x 10-m / A. The magnetic susceptibility varies between 3-10, while the twinning stiffness varies between 30-40 MPa within the average bias stress range of 0.3 to 2.8 MPa. At optimum fields and bias stresses, the mechanical energy density during cyclic deformation was 65 kJ/m3 at the expense of 20 kJ/m3 lost An important first observation of dynamic stress vs. field behavior is understood by an extension of a magnetomechanical phenomenological model.","(cont.) The mechanism of stress generation is thought to be magnetization rotation causing negative magnetostriction with quadratic magnetic-field dependence before twin boundaries move. Above the threshold field for twin boundary motion, stress increases in proportion to the magnetic-field-induced strain. Dynamic actuation measurements performed here help put Ni-Mn-Ga FSMAs into perspective with other active materials performance: Ni-Mn-Ga FSMAs are between low bandwidth, high strain, Nitinol and high bandwidth, low strain Terfenol-D and ferroelectrics."]},{"key":"dc:description.degree","label":"Dc Description Degree","values":["Ph.D."]},{"key":"dc:format.mimetype","label":"Dc Format Mimetype","values":["application/pdf"]},{"key":"dc:title","label":"Title","values":["Dynamic actuation properties of Ni-Mn-Ga ferromagnetic shape memory alloys"]}]}],"canonical_facts":{"dc:contributor.advisor":["Samuel M. Allen and Robert C. O'Handley."],"dc:contributor.department":["Massachusetts Institute of Technology. Department of Materials Science and Engineering"],"dc:contributor.other":["Massachusetts Institute of Technology. Dept. of Materials Science and Engineering."],"dc:creator":["Henry, Christopher P. (Christopher Paul), 1974-"],"dc:date.accessioned":["2005-08-23T20:13:14Z"],"dc:date.available":["2005-08-23T20:13:14Z"],"dc:date.issued":["2002"],"dc:description":["Thesis (Ph.D.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 2002.","Includes bibliographical references (leaves 198-201)."],"dc:description.abstract":["Dynamic magnetic-field-induced strain actuation of up to 3% with a frequency bandwidth of least 500 Hz in Ni48.5Mn29.5Ga21 ferromagnetic shape memory alloys (FMSAs) is achieved. Hardware was designed and constructed to measure frequency bandwidth, magnetic-field-induced strain, stress and magnetization driven from an applied magnetic field. The bandwidth in this investigation was only limited by inductive reactance of the hardware, not by fundamental limitations of Ni-Mn-Ga. Degradation of the peak dynamic actuation strain occurred from 3.0% to 2.6% with increasing number of cycles from Nz1,000 to N 100,000. Measurement of strain, stress, and magnetization driven by a magnetic field permitted the comparison of measured properties versus properly defined thermodynamic properties. The peak thermodynamic piezomagnetic coefficient is d3, 1,= 2.5 x 10-7m / A compared to the experimental slope, dE/dH, of 1.0 x 10-7 m / A at N-1,000 cycles and 1.4 x 10-7 m / A at N-100,000 cycles, respectively. The thermodynamic piezomagnetic coefficient is five times greater than Terfenol-D with d31 = 5.0 x 10-m / A. The magnetic susceptibility varies between 3-10, while the twinning stiffness varies between 30-40 MPa within the average bias stress range of 0.3 to 2.8 MPa. At optimum fields and bias stresses, the mechanical energy density during cyclic deformation was 65 kJ/m3 at the expense of 20 kJ/m3 lost An important first observation of dynamic stress vs. field behavior is understood by an extension of a magnetomechanical phenomenological model.","(cont.) The mechanism of stress generation is thought to be magnetization rotation causing negative magnetostriction with quadratic magnetic-field dependence before twin boundaries move. Above the threshold field for twin boundary motion, stress increases in proportion to the magnetic-field-induced strain. Dynamic actuation measurements performed here help put Ni-Mn-Ga FSMAs into perspective with other active materials performance: Ni-Mn-Ga FSMAs are between low bandwidth, high strain, Nitinol and high bandwidth, low strain Terfenol-D and ferroelectrics."],"dc:description.degree":["Ph.D."],"dc:format.mimetype":["application/pdf"],"dc:identifier.uri":["http://hdl.handle.net/1721.1/8442"],"dc:language.iso":["eng"],"dc:publisher":["Massachusetts Institute of Technology"],"dc:rights":["M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission."],"dc:rights.uri":["http://dspace.mit.edu/handle/1721.1/7582"],"dc:subject":["Materials Science and Engineering."],"dc:title":["Dynamic actuation properties of Ni-Mn-Ga ferromagnetic shape memory alloys"],"dc:type":["Thesis"]},"updated_at":"2026-07-22T22:20:51Z"}