Factors affecting piston ring friction

The piston ring pack friction is a major contributor to the internal combustion engine mechanical friction loss. The oil control ring decides the oil supply to the top two rings in addition to being the major friction contributor in the ring pack. This work concentrated on the oil control ring friction. A large range of ring land widths and tensions, liner finish, and oil viscosity were investigated both experimentally and numerically to reveal how different factors affect the piston ring friction. A floating liner engine (FLE) was modified for motoring tests. The engine system repeatability and self-consistency were demonstrated. The thesis then discussed proper methods to select and measure the rings, liners and oil, which were important to generating meaningful results from the experiment. The ranges of engine speeds and liner temperatures were designed to ensure that all the lubrication modes, namely, boundary, mixed and hydrodynamic, can become dominant in both the instantaneous friction over a cycle and the FMEP over the engine speed range for any combination of rings, liners and lubricants. A parallel modeling effort was made to the experiments. The work showed that with careful preparation of adequate information on rings, liners and lubricants, the model can match the friction trends observed in the experiment over a large range of operating parameters and designs on the ring, liner finish and lubricant viscosity. The ring friction change over the liner break-in was studied using liners covering a wide range of surface roughness. The hydrodynamic pressure generation ability of the liner appears to be decided by the large surface structure. Therefore, the break-in process, which removes individual asperities from the plateau, does not affect pure hydrodynamic lubrication, and only the mixed lubrication is affected by the plateau roughness change. By keeping the same hydrodynamic pressure - ring/liner clearance (P-h) correlation and changing the plateau roughness, the model can predict the ring friction change over different lubrication regimes during the break-in. Compared to the current industry norm, a new engine power cylinder system design using a smaller land width twin land oil control ring with a lower ring tension and accompanied by a smoother liner surface gives lower friction and better oil control at the same time.

Department dc:contributor.department

Massachusetts Institute of Technology. Department of Aeronautics and Astronautics

Grantor dc:publisher

Massachusetts Institute of Technology

Year dc:date.issued

2013

Author dc:creator

• Liao, Kai, Ph. D. Massachusetts Institute of Technology

Advisor dc:contributor.advisor

• Tian Tian.

• Aeronautics and Astronautics.

Statement dc:rights

• M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.

Licence dc:rights.uri

• http://dspace.mit.edu/handle/1721.1/7582

Language dc:language.iso

eng

Handle dc:identifier.uri

http://hdl.handle.net/1721.1/82499

OAI identifier oai:identifier

oai:dspace.mit.edu:1721.1/82499