Back to results

Massachusetts Institute of Technology

Nanoengineered surfaces for improvements in energy systems : application to concentrated solar and geothermal power plants

Abstract

dc:description.abstract

The main drawback to renewable energy systems is the higher cost of production compared to competitors such as fossil fuels. Thus, there is a need to increase the efficiency of renewable energy systems in an effort to make them more cost competitive. In this study, the use of nanosurfaces is evaluated for its benefits in improving the efficiency of a concentrated solar tower power system by increasing the energy retained by the receiver surface, and for reducing the fouling on geothermal heat exchangers. The samples tested for the solar receiver application were Inconel 617, Inconel 617 with a 150 nm layer of platinum, Inconel 617 with a 150 nm layer of platinum and a 550 nm layer of nickel oxide, oxidized nickel, and silicon carbide. The experimental results indicated that the platinum was an ineffective diffusion barrier, nickel oxide displays solar selective properties, and silicon carbide would be the best choice for a surface among the samples tested. This indicates that at the operating temperatures for this receiver at 700 °C, a black body surface is more effective than a practical solar selective surface. The nanosurfaces tested for the antifouling application in geothermal systems were subjected to chemistry conditions similar to that in a Dry Cooling Tower at a geothermal plant in Larderello, Italy. Each sample's performance was measured by determining each samples weight change and surface characterization after exposure in an experimental loop. The best performing coatings, all of which showed negligible weight gain, were the Curran 1000 coating from Curran International, the Curran 1000 coating with nanographene, and the Curralon coating with PTFE. Upon further analysis, the Curran 1000 with nanographene was identified as the most promising coating option.

Degree

thesis:*
Department dc:contributor.department
Massachusetts Institute of Technology. Dept. of Nuclear Science and Engineering.
Grantor dc:publisher
Massachusetts Institute of Technology
Year dc:date.issued
2012

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Rehn, Alexander W. (Alexander William)
Advisor dc:contributor.advisor
  • Thomas J. McKrell.

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
Language dc:language.iso
eng

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/1721.1/76971
OAI identifier oai:identifier
oai:dspace.mit.edu:1721.1/76971

Chain of custody

source
Harvested from
MIT
Base URL
dspace.mit.edu/oai/request
Last updated
2026-07-22
Source record
OAI-PMH GetRecord
citation

Rehn, Alexander W. (Alexander William). Nanoengineered surfaces for improvements in energy systems : application to concentrated solar and geothermal power plants. Massachusetts Institute of Technology, 2012. http://hdl.handle.net/1721.1/76971