Remote nondestructive evaluation of composite-steel interface by acoustic laser vibrometry

Composite materials are increasingly being used in both civil and ship structures. In particular, fiber reinforced polymer (FRP) composites are being utilized. FRP materials are most often employed to reinforce aging or damaged portions of civil structures. On naval vessels, FRP materials are incorporated to reduce weight, particularly up high, and to reduce radar cross section, thereby increasing stealth capability. In both cases of FRP use, it is usually in conjunction with some other material, oftentimes steel. It is beneficial when using FRP and steel to adhesively bond them together. When these materials are joined adhesively, the most common failure mode is debonding or delamination at the interface of the adhesive with the steel and composite materials. These defects are often difficult to discern without the aid of some form of nondestructive testing (NDT). Acoustic laser vibrometry is a relatively new method of NDT that shows a lot of promise in analysis of this interface. In this approach, an airborne acoustic wave is utilized to excite the location of the damage underneath the FRP sheets/plates and the target vibration is measured using a laser vibrometer. To study the acoustic laser method, a defect specimen was created from a plate of AL6XN stainless steel and a plate of glass FRP adhesively bonded on their faces with a purposely placed elliptical debonding defect. A number of parameters of the acoustic laser vibrometry system were varied and trends were found. Additionally, grid data was collected from the defect specimen and a defect mapping was created. Theoretical and finite element models were produced and compared to measured results. The close correlation of the results from these three methods validated them all.

Department dc:contributor.department

Massachusetts Institute of Technology. Department of Mechanical Engineering

Grantor dc:publisher

Massachusetts Institute of Technology

Year dc:date.issued

2012

Author dc:creator

• Emge, Timothy James, II

Advisor dc:contributor.advisor

• Oral Büyüköztürk.

• Mechanical Engineering.
• Civil and Environmental Engineering.

Statement dc:rights

• M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.

Licence dc:rights.uri

• http://dspace.mit.edu/handle/1721.1/7582

Language dc:language.iso

eng

Handle dc:identifier.uri

http://hdl.handle.net/1721.1/74902

OAI identifier oai:identifier

oai:dspace.mit.edu:1721.1/74902