Morphology and mechanical properties of electrospun polymeric fibers and their nonwoven fabrics

Electrospinning is a straight forward method to produce fibers with diameter on the order of a few tens of nanometers to the size approaching commercial fibers (on the order of 10 prm or larger). Recently, the length scale effect on physical properties has attracted great attention because of the potential to produce new materials with unique behavior. In general, the behavior of commercial fibers can be investigated by traditional experiments, and that of nanofibers can be studied by molecular dynamics simulation or Monte Carlo technique. However, the transition of their properties from the bulk to the nanoscale materials is not well understood. Electrospinning provides us a bridge to understand the properties of fibers transiting from the behavior of the bulk material to that of the nanofibers. Among these areas, I am interested in the possible remarkable changes in mechanical properties that may occur in electrospun fibers due to the size effect, where the comprehensive understanding is still lacking. My research objectives are to understand mechanical properties of electrospun polymeric fibers as a function of their size, structure and morphology. The first part of my research is to study internal structures and external topographies of electrospun fibers, and to understand their effect on mechanical properties. Amorphous polystyrene (PS) and semicrystalline polyacrylonitrile (PAN) were dissolved in a high boiling point solvent, dimethylformamide (DMF), for electrospinning. When electrospun in a high-humidity environment, the interior of these fibers was found to be highly porous rather than consolidated, despite the smooth and nonporous appearance of the fiber surfaces. The formation of interior porosity is attributed to the miscibility of water, a nonsolvent for the polymers in solution, with DMF. The resulting morphology is a consequence of the relatively rapid diffusion of water into the jet, leading to a liquid-liquid phase separation that precedes solidification due to evaporation of DMF from the jet. When electrospun in a low humidity environment, the fibers exhibit a wrinkled morphology that can be explained by a buckling instability. Understanding which structures and morphology form under a given set of conditions is achieved through the comparison of three characteristic times: the drying time, the buckling time and the phase separation time. The structures and morphology have important consequences for the properties of the fibers such as their mechanical strength and stiffness.

Department dc:contributor.department

Massachusetts Institute of Technology. Dept. of Chemical Engineering.

Grantor dc:publisher

Massachusetts Institute of Technology

Year dc:date.issued

2011

Author dc:creator

• Pai, Chia-Ling

Advisor dc:contributor.advisor

• Gregory C. Rutledge and Mary C.-Boyce.

• Chemical Engineering.

Statement dc:rights

• M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.

Licence dc:rights.uri

• http://dspace.mit.edu/handle/1721.1/7582

Language dc:language.iso

eng

Handle dc:identifier.uri

http://hdl.handle.net/1721.1/65763

OAI identifier oai:identifier

oai:dspace.mit.edu:1721.1/65763