Back to results

Massachusetts Institute of Technology

Design and implementation of a preload electronics architecture for a MEMS accelerometer

Abstract

dc:description.abstract

This thesis describes the design and implementation of an electronics system to provide rebalancing and readout for a force-rebalanced microelectromechanical accelerometer. A feedback control loop is devised using a novel preload architecture, compensating the proof mass of the sensor and providing an accurate acceleration measurement. This architecture is compared to alternative methods of linearizing the control loop. The electronics system is divided into analog and digital subsystems. The design is analyzed at several abstraction levels. The system is implemented for prototype testing with discrete components on a printed circuit board with a MEMS sensor attached. A computer program is implemented to receive and process the readout data using the serial port. The design methodology consists of a top-down design flow based on simulation. At each iteration in the design process, the lower level abstraction is verified with the previous model. Eventually, the design reaches the level of synthesizable digital logic and discrete analog components. This thesis describes the design process and implementation details for creating an accelerometer system prototype ready for lab testing. Detailed simulations indicate that the implemented design is likely to meet the design goals for a personal navigation system suitable for a human or land vehicle. Conclusions on design methodology and verification techniques are also presented.

Degree

thesis:*
Department dc:contributor.department
Massachusetts Institute of Technology. Dept. of Electrical Engineering and Computer Science.
Grantor dc:publisher
Massachusetts Institute of Technology
Year dc:date.issued
2006

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Lin, Alvin Lai
Advisor dc:contributor.advisor
  • David J. McGorty and Jeffrey H. Lang.

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
Language dc:language.iso
eng

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/1721.1/62988
OAI identifier oai:identifier
oai:dspace.mit.edu:1721.1/62988

Chain of custody

source
Harvested from
MIT
Base URL
dspace.mit.edu/oai/request
Last updated
2026-07-22
Source record
OAI-PMH GetRecord
citation

Lin, Alvin Lai. Design and implementation of a preload electronics architecture for a MEMS accelerometer. Massachusetts Institute of Technology, 2006. http://hdl.handle.net/1721.1/62988