Back to results

Massachusetts Institute of Technology

Design of a 250 GHz gyrotron amplifier

Abstract

dc:description.abstract

A design is presented of a 250 GHz, 1 kW gyrotron traveling wave tube (gyro-TWT) amplifier with gain exceeding 50 dB. Calculations show that the amplifier will operate at 32 kV, 1 A with a saturated gain of 60 dB, an output power of 1 kW and a gain bandwidth of 3 GHz. The amplifier uses a novel photonic band gap (PBG) interaction circuit for stable single mode operation in an overmoded circuit. The design mode is a TE03-like mode confined by the PBG lattice with no nearby competing modes. The design of the input coupler, interaction circuit, output coupler and electron gun have also been completed. The amplifier design accounts for requirements imposed by the device's intended application of pulsed nuclear magnetic resonance spectroscopy with pulses as short as several hundred picoseconds. This design will be implemented at a later date for the construction of the highest frequency, kW power level amplifier based on vacuum electronics. To gain understanding of short pulse amplification in vacuum electron devices, an experimental study of sub-nanosecond pulse amplification in a gyro-TWT has been carried out on an existing experimental setup at 140 GHz. The gyro-TWT operates with 30 dB of small signal gain in the HE06 mode of a confocal waveguide. Picosecond pulses show broadening and transit time delay due to two distinct effects: the frequency dependence of the group velocity near cutoff and gain narrowing by the finite gain bandwidth of 1.2 GHz. Experimental results taken over a wide range of parameters, with pulses as short as 400 ps, show good agreement with a theoretical model in the small signal gain regime.

Degree

thesis:*
Department dc:contributor.department
Massachusetts Institute of Technology. Dept. of Electrical Engineering and Computer Science.
Grantor dc:publisher
Massachusetts Institute of Technology
Year dc:date.issued
2010

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Nanni, Emilio A. (Emilio Alessandro)
Advisor dc:contributor.advisor
  • Richard J. Temkin.

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
Language dc:language.iso
eng

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/1721.1/62438
OAI identifier oai:identifier
oai:dspace.mit.edu:1721.1/62438

Chain of custody

source
Harvested from
MIT
Base URL
dspace.mit.edu/oai/request
Last updated
2026-07-22
Source record
OAI-PMH GetRecord
citation

Nanni, Emilio A. (Emilio Alessandro). Design of a 250 GHz gyrotron amplifier. Massachusetts Institute of Technology, 2010. http://hdl.handle.net/1721.1/62438