Suppression of thermoacoustic instabilities in a swirl combustor through microjet air injection

Thermoacoustic or combustion instability, a positive feedback loop coupling heat release rate and acoustic oscillations in a combustor, is one of the greatest challenges currently facing the development of new gas turbine systems for propulsion and power generation. Traditional gas turbine designs have bypassed the problem of combustion instability by designing non-premixed combustors around a fixed operating point. Increasing trends toward lower emissions and greater fuel flexibility have placed more emphasis on developing lean-premixed combustors that are stable over a range of operating conditions. This thesis explores two aspects of combustion instability in the context of a swirl-stabilized, lean-premixed combustor: the role of the major coherent flow structures, and the potential for using secondary air injection to passively suppress combustion instability. Microjets inject air into the combustion chamber in the flame anchoring zone. These microjet injectors attempt to modify the flow field so as to break the feedback mechanism between the chamber acoustics and the heat release rate. Eight microjet injector configurations are studied. Flow is injected axially into the outer recirculation zone or radially into the inner recirculation zone. The injectors inject air with either no swirl, the same swirl direction as the main air flow, or the opposite swirl direction as the main air flow. Chamber acoustics are measured using sensitive microphones. The flame and flow field are interrogated using high-speed imaging and stereoscopic particle image velocimetry. The bulk of this work was conducted for lean propane/air flames, slightly above the lean blowoff limit. Two modes of instability were examined: the 1/4 wave mode at 40 Hz, and the 3/4 wave mode at 105 Hz. Without microjet injection, the combustor transitions directly from the 1/4 wave mode instability to the 3/4 wave mode instability as the equivalence ratio is increased above 0.58. Counter-swirling radial microjets injecting air into the inner recirculation zone increased the lower limit of the 3/4 wave mode to an equivalence ratio of 0.62 and reduced the amplitude of the 1/4 wave mode, effectively creating a stable operating regime for equivalence ratios between the two modes. Microjet injector tests indicate that the inner recirculation zone has a dominant role in the dynamic stabilization of the flame. This observation is confirmed by stereoscopic PIV measurements that reveal periodic formation and collapse of the vortex breakdown bubble in the 3/4 wave mode and vortex shedding in the inner recirculation zone in the 1/4 wave mode.

Department dc:contributor.department

Massachusetts Institute of Technology. Dept. of Mechanical Engineering.

Grantor dc:publisher

Massachusetts Institute of Technology

Year dc:date.issued

2010

Author dc:creator

• LaBry, Zachary Alexander

Advisor dc:contributor.advisor

• Ahmed F. Ghoniem.

• Mechanical Engineering.

Statement dc:rights

• M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.

Licence dc:rights.uri

• http://dspace.mit.edu/handle/1721.1/7582

Language dc:language.iso

eng

Handle dc:identifier.uri

http://hdl.handle.net/1721.1/60212

OAI identifier oai:identifier

oai:dspace.mit.edu:1721.1/60212