Energy saving potential of various roof technologies

Unconventional roof technologies such as cool roofs and green roofs have been shown to reduce building heating and cooling load. Although previous studies suggest potential for energy savings through such technologies, many factors affect potential savings. To further investigate these factors, a tool has been developed to allow architects and designers the ability to quickly assess the energy saving potential of different roof technologies and roof constructions for various sites around the world. A first principles heat transfer model is developed for each of the roof technologies, with particular care for green roof heat and mass transfer. Two sets of experimental data from Japan and Florida validate the models by predicting roof surface temperature. The predicted roof surface temperatures in Japan agree with measured values within 10 and 26% of peak roof temperature fluctuations for the cool and green roof respectively, while the same models in Florida agree with measured values there within 7.2 and 14% for the cool and green roof respectively. The models have been integrated into a free online building simulation tool, MIT's Design Advisor, available at http : //designadvisor.mit.edu. Numerous simulations are run, showing that potential energy savings are found to strongly vary with many parameters, particularly roof type, climate, and amount of insulation. For example, a one-story building in Boston with an uninsulated modified-bitumen roof can save 82% in cooling and heating energy by adding 3 m 2K/W of roof insulation, whereas only 34% if an uninsulated green roof is installed instead. However, in Lisbon, the same addition of roof insulation to the same building results in 54% savings, while the installation of an uninsulated green roof results in a 67% reduction. Such findings and their implications are discussed for other locations and design parameters.

Department dc:contributor.department

Massachusetts Institute of Technology. Dept. of Mechanical Engineering.

Grantor dc:publisher

Massachusetts Institute of Technology

Year dc:date.issued

2010

Author dc:creator

• Ray, Stephen D. (Stephen Douglas)

Advisor dc:contributor.advisor

• Leon R. Glicksman.

• Mechanical Engineering.

Statement dc:rights

• M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.

Licence dc:rights.uri

• http://dspace.mit.edu/handle/1721.1/7582

Language dc:language.iso

eng

Handle dc:identifier.uri

http://hdl.handle.net/1721.1/57790

OAI identifier oai:identifier

oai:dspace.mit.edu:1721.1/57790