Noise analysis of inkjet printers over stages and quality of the job and frequency sources from equipment in laboratory optical trap room

This experiment measured the level of sound emitted over the course of the print cycle by an HP inkjet printer and determined how the level varies with changes in the print quality settings and stages of the print cycle. As a test document was printed on the printer at various print quality settings and in two different environments-in a dorm room and in a laboratory chamber, a Sound Level Meter measured the sound intensity over the course of the entire print cycle and recorded the values. While sound levels were similar across some stages of the print job, in the actual printing step, the sound level varied directly with the quality and inversely with the time spent printing. For the normal quality setting, the mean sound level in the dorm room [in the chamber] was 55.242 ± 2.41 dB [56.911 ± 2.12 dB] with 12.4 s [12.4 s] of actual printing. These results have implications for a new generation of inkjet printers. Additionally, this experiment determined the noise contributors to a laboratory room containing an optical trap. The laser's fan-based cooling system yields frequencies of approximately 270 Hz and 540 Hz in the room, while the room's heater produces frequencies of approximately 110 Hz. The devices contributing to frequency peaks are the laser's fan-based cooling system and the room heaters. The fan-based cooling system produced consistent frequencies of approximately 270 Hz and 540 Hz. Also, the room heaters yield a lower frequency output of approximately 110 Hz. Even with all controllable devices turned off, a 33.5 Hz low frequency noise is present in the sound power spectrum FFT graph, most likely from the refrigerator outside the room of interest. To reduce the effect of the electronic equipment's frequencies on the high precision measurements acquired in the optical trap room, data should be taken with the two rooms' heaters off, and a quieter method of cooling the laser should be investigated.

Department dc:contributor.department

Massachusetts Institute of Technology. Dept. of Mechanical Engineering.

Grantor dc:publisher

Massachusetts Institute of Technology

Year dc:date.issued

2009

Author dc:creator

• Moore, Jennifer H. (Jennifer Haydon)

Advisor dc:contributor.advisor

• Matthew J. Lang.

• Mechanical Engineering.

Statement dc:rights

• M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.

Licence dc:rights.uri

• http://dspace.mit.edu/handle/1721.1/7582

Language dc:language.iso

eng

Handle dc:identifier.uri

http://hdl.handle.net/1721.1/54518

OAI identifier oai:identifier

oai:dspace.mit.edu:1721.1/54518