High density bimodal parts by three dimensional printing

Three Dimensional Printing (3DP) is a rapid prototyping process that allows for the fabrication of injection molding tooling from computer generated models. Due to market demands for harder, more robust tooling, improving the material properties and the geometric control of 3DP parts has been a necessary goal of the project. One path to accomplishing this task is to increase the green density of the 3DP compact prior to sintering. To accomplish this goal, the printing of fine, sub-micron Titanium Carbide slurries into a large powder bed to create a dense bimodal compact was investigated. Experiments performed demonstrated that a uniform, defect free microstructure could be obtained by appropriately selecting 3DP process parameters. By spreading 4 mil layers, and double printing, sample coupons with estimated green densities of up to 83% were obtained. In addition, the effect of varying either the bimodal concentrations or the relative particle sizes, on fine porosity in 3DP parts after infiltration was studied. Three bimodal ceramic-metal material systems, each based on Titanium Carbide and subsequently infiltrated with a copper-nickel-manganese alloy, were also developed. The first system, a bimodal system of large TiC and fine TiC powders exhibits good dimensional control (net shrinkage of 0.2%) and age-hardening properties (up to 43 HRC). The second system, a bimodal system of large Stainless Steel and fine TiC powders, is characterized by modest dimensional control (less than 2%), but does not exhibit any age-hardening behavior. The third system developed, a bimodal system of large Molybdenum powders and fine TiC powders, can be hardened up to 25 HRC with a 12 hour 400°C treatment.

Department dc:contributor.department

Massachusetts Institute of Technology. Department of Mechanical Engineering

Grantor dc:publisher

Massachusetts Institute of Technology

Year dc:date.issued

1998

Author dc:creator

• Oton, Akan E., 1974-

Advisor dc:contributor.advisor

• Emanuel M. Sachs.

• Mechanical Engineering

Statement dc:rights

• M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.

Licence dc:rights.uri

• http://dspace.mit.edu/handle/1721.1/7582

Language dc:language.iso

eng

Handle dc:identifier.uri

http://hdl.handle.net/1721.1/50462

OAI identifier oai:identifier

oai:dspace.mit.edu:1721.1/50462