{"id":{"repo_id":"mit","oai_identifier":"oai:dspace.mit.edu:1721.1/45295"},"canonical_url":"https://search.dev.ndltd.org/etd/mit/oai:dspace.mit.edu:1721.1/45295","repository":{"repo_id":"mit","name":"MIT","base_url":"https://dspace.mit.edu/oai/request"},"display":{"title":"An analysis of through-hole punching in PMMA with varied process parameters","abstract":"The ability to combine through-hole punching with a surface patterning during microembossing would greatly enhance the production of a variety of microfluidic devices. In support of that goal, a series of theoretical simulations and physical tests were performed to investigate the effect of clearance, shear speed and temperature in creating through-holes. A better understanding of the effects of these parameters in through-hole punching has useful implications in the development of better tools for hot embossing. Theoretical simulations modeling the punch and die mechanics for various punch sizes and clearances were performed using ADINA finite element analysis (FEA) software; similar simulations were done for a straight shearing situation for comparison. A special straight-line punch and die set with a movable was then machined for use with an existing hot-embossing machine. Tests were done while varying the temperature of the sample, the clearance of the shear and the shear speed. From the finite element analysis, we gathered data about the shear stress distribution in the samples during the shearing process. The physical experiments gave us information about the peak stress for each test, allowing for some quantitative analysis. The parts were also assessed qualitatively under 10x magnification and classified accordingly. Ultimately, we were able to see some signs of shear quality degradation with increased clearance, but the differences were less pronounced at small clearances (25 microns or less).","abstract_html":"The ability to combine through-hole punching with a surface patterning during microembossing would greatly enhance the production of a variety of microfluidic devices. In support of that goal, a series of theoretical simulations and physical tests were performed to investigate the effect of clearance, shear speed and temperature in creating through-holes. A better understanding of the effects of these parameters in through-hole punching has useful implications in the development of better tools for hot embossing. Theoretical simulations modeling the punch and die mechanics for various punch sizes and clearances were performed using ADINA finite element analysis (FEA) software; similar simulations were done for a straight shearing situation for comparison. A special straight-line punch and die set with a movable was then machined for use with an existing hot-embossing machine. Tests were done while varying the temperature of the sample, the clearance of the shear and the shear speed. From the finite element analysis, we gathered data about the shear stress distribution in the samples during the shearing process. The physical experiments gave us information about the peak stress for each test, allowing for some quantitative analysis. The parts were also assessed qualitatively under 10x magnification and classified accordingly. Ultimately, we were able to see some signs of shear quality degradation with increased clearance, but the differences were less pronounced at small clearances (25 microns or less).","abstract_has_math":false,"creators":["Rossen, Stuart Graham"],"institution":"Massachusetts Institute of Technology","degree_name":null,"degree_level":null,"degree_discipline":null,"degree_department":"Massachusetts Institute of Technology. Dept. of Mechanical Engineering.","school":null,"contributors":[],"advisors":["David Hardt."],"committee_chairs":[],"committee_members":[],"year":2008,"date_issued":"2008","date_published":"2008","updated_at":"2026-07-22T22:21:28Z","subjects":["Mechanical Engineering."],"languages":["eng"],"rights":["M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission."],"rights_urls":["http://dspace.mit.edu/handle/1721.1/7582"],"identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/1721.1/45295","outbound_label":"Handle","outbound_source":"dc:identifier.uri"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.advisor","label":"Advisor","values":["David Hardt."]},{"key":"dc:contributor.department","label":"Department","values":["Massachusetts Institute of Technology. Dept. of Mechanical Engineering."]},{"key":"dc:contributor.other","label":"Dc Contributor Other","values":["Massachusetts Institute of Technology. Dept. of Mechanical Engineering."]},{"key":"dc:creator","label":"Author","values":["Rossen, Stuart Graham"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2009-04-29T17:21:49Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2009-04-29T17:21:49Z"]},{"key":"dc:date.issued","label":"Date","values":["2008"]},{"key":"dc:publisher","label":"Institution","values":["Massachusetts Institute of Technology"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Mechanical Engineering."]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["eng"]},{"key":"dc:rights","label":"Dc Rights","values":["M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission."]},{"key":"dc:rights.uri","label":"Rights URI","values":["http://dspace.mit.edu/handle/1721.1/7582"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://hdl.handle.net/1721.1/45295"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description","label":"Description","values":["Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2008.","Includes bibliographical references (leaf 42)."]},{"key":"dc:description.abstract","label":"Abstract","values":["The ability to combine through-hole punching with a surface patterning during microembossing would greatly enhance the production of a variety of microfluidic devices. In support of that goal, a series of theoretical simulations and physical tests were performed to investigate the effect of clearance, shear speed and temperature in creating through-holes. A better understanding of the effects of these parameters in through-hole punching has useful implications in the development of better tools for hot embossing. Theoretical simulations modeling the punch and die mechanics for various punch sizes and clearances were performed using ADINA finite element analysis (FEA) software; similar simulations were done for a straight shearing situation for comparison. A special straight-line punch and die set with a movable was then machined for use with an existing hot-embossing machine. Tests were done while varying the temperature of the sample, the clearance of the shear and the shear speed. From the finite element analysis, we gathered data about the shear stress distribution in the samples during the shearing process. The physical experiments gave us information about the peak stress for each test, allowing for some quantitative analysis. The parts were also assessed qualitatively under 10x magnification and classified accordingly. Ultimately, we were able to see some signs of shear quality degradation with increased clearance, but the differences were less pronounced at small clearances (25 microns or less)."]},{"key":"dc:description.degree","label":"Dc Description Degree","values":["S.B."]},{"key":"dc:title","label":"Title","values":["An analysis of through-hole punching in PMMA with varied process parameters"]}]}],"canonical_facts":{"dc:contributor.advisor":["David Hardt."],"dc:contributor.department":["Massachusetts Institute of Technology. Dept. of Mechanical Engineering."],"dc:contributor.other":["Massachusetts Institute of Technology. Dept. of Mechanical Engineering."],"dc:creator":["Rossen, Stuart Graham"],"dc:date.accessioned":["2009-04-29T17:21:49Z"],"dc:date.available":["2009-04-29T17:21:49Z"],"dc:date.issued":["2008"],"dc:description":["Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2008.","Includes bibliographical references (leaf 42)."],"dc:description.abstract":["The ability to combine through-hole punching with a surface patterning during microembossing would greatly enhance the production of a variety of microfluidic devices. In support of that goal, a series of theoretical simulations and physical tests were performed to investigate the effect of clearance, shear speed and temperature in creating through-holes. A better understanding of the effects of these parameters in through-hole punching has useful implications in the development of better tools for hot embossing. Theoretical simulations modeling the punch and die mechanics for various punch sizes and clearances were performed using ADINA finite element analysis (FEA) software; similar simulations were done for a straight shearing situation for comparison. A special straight-line punch and die set with a movable was then machined for use with an existing hot-embossing machine. Tests were done while varying the temperature of the sample, the clearance of the shear and the shear speed. From the finite element analysis, we gathered data about the shear stress distribution in the samples during the shearing process. The physical experiments gave us information about the peak stress for each test, allowing for some quantitative analysis. The parts were also assessed qualitatively under 10x magnification and classified accordingly. Ultimately, we were able to see some signs of shear quality degradation with increased clearance, but the differences were less pronounced at small clearances (25 microns or less)."],"dc:description.degree":["S.B."],"dc:identifier.uri":["http://hdl.handle.net/1721.1/45295"],"dc:language.iso":["eng"],"dc:publisher":["Massachusetts Institute of Technology"],"dc:rights":["M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission."],"dc:rights.uri":["http://dspace.mit.edu/handle/1721.1/7582"],"dc:subject":["Mechanical Engineering."],"dc:title":["An analysis of through-hole punching in PMMA with varied process parameters"],"dc:type":["Thesis"]},"updated_at":"2026-07-22T22:21:28Z"}