{"id":{"repo_id":"mit","oai_identifier":"oai:dspace.mit.edu:1721.1/44839"},"canonical_url":"https://search.dev.ndltd.org/etd/mit/oai:dspace.mit.edu:1721.1/44839","repository":{"repo_id":"mit","name":"MIT","base_url":"https://dspace.mit.edu/oai/request"},"display":{"title":"Measurement of near-surface void fraction and macrolayer thickness in boiling water and silica-based nanofluid","abstract":"Nanofluids are engineered fluids that contain a suspension of nanoparticles in a pure substance. Nanoparticles can be any variety of metals, metal oxides, or ceramics. They have been shown to increase heat transfer properties such as thermal conductivity, convective heat transfer, and critical heat flux(CHF). An optical probe used to detect phase was used to measure the void fraction during boiling, from which the macrolayer thickness can be derived. The optical probe was verified to have an error of 11.9% and 10.4% for measuring bubble diameter in water and R-123, respectively, and an error of 5.2% and 7.1% for measuring velocity in water and R-123. The macrolayer dryout theory of CHF was tested by investigating the change in macrolayer thickness for different heat fluxes in de-ionized (DI) water and 0.01% (by volume) SiO₂nanofluid. A current controlled power source heated a sandblasted, stainless steel plate resting in an isothermal bath. The silica nanofluid had a CHF enhancement of 82% over the DI water along with a slightly higher (20% enhancement) heat transfer coefficient. The macrolayer thickness, as measured by the optical probe, at a comparable heat flux was much larger than the DI water, possibly due to the increased wettability of the heater caused by the deposition of nanoparticles on the heater. This trend is in agreement with prediction of existing theory.","abstract_html":"Nanofluids are engineered fluids that contain a suspension of nanoparticles in a pure substance. Nanoparticles can be any variety of metals, metal oxides, or ceramics. They have been shown to increase heat transfer properties such as thermal conductivity, convective heat transfer, and critical heat flux(CHF). An optical probe used to detect phase was used to measure the void fraction during boiling, from which the macrolayer thickness can be derived. The optical probe was verified to have an error of 11.9% and 10.4% for measuring bubble diameter in water and R-123, respectively, and an error of 5.2% and 7.1% for measuring velocity in water and R-123. The macrolayer dryout theory of CHF was tested by investigating the change in macrolayer thickness for different heat fluxes in de-ionized (DI) water and 0.01% (by volume) SiO₂nanofluid. A current controlled power source heated a sandblasted, stainless steel plate resting in an isothermal bath. The silica nanofluid had a CHF enhancement of 82% over the DI water along with a slightly higher (20% enhancement) heat transfer coefficient. The macrolayer thickness, as measured by the optical probe, at a comparable heat flux was much larger than the DI water, possibly due to the increased wettability of the heater caused by the deposition of nanoparticles on the heater. This trend is in agreement with prediction of existing theory.","abstract_has_math":false,"creators":["Lerch Andrew (Andrew J.)"],"institution":"Massachusetts Institute of Technology","degree_name":null,"degree_level":null,"degree_discipline":null,"degree_department":"Massachusetts Institute of Technology. Dept. of Nuclear Science and Engineering.","school":null,"contributors":[],"advisors":["Jacopo Buongiorno and Lin-Wen Hu."],"committee_chairs":[],"committee_members":[],"year":2008,"date_issued":"2008","date_published":"2008","updated_at":"2026-07-22T22:22:27Z","subjects":["Nuclear Science and Engineering."],"languages":["eng"],"rights":["M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission."],"rights_urls":["http://dspace.mit.edu/handle/1721.1/7582"],"identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/1721.1/44839","outbound_label":"Handle","outbound_source":"dc:identifier.uri"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.advisor","label":"Advisor","values":["Jacopo Buongiorno and Lin-Wen Hu."]},{"key":"dc:contributor.department","label":"Department","values":["Massachusetts Institute of Technology. Dept. of Nuclear Science and Engineering."]},{"key":"dc:contributor.other","label":"Dc Contributor Other","values":["Massachusetts Institute of Technology. Dept. of Nuclear Science and Engineering."]},{"key":"dc:creator","label":"Author","values":["Lerch Andrew (Andrew J.)"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2009-03-16T19:49:31Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2009-03-16T19:49:31Z"]},{"key":"dc:date.issued","label":"Date","values":["2008"]},{"key":"dc:publisher","label":"Institution","values":["Massachusetts Institute of Technology"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Nuclear Science and Engineering."]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["eng"]},{"key":"dc:rights","label":"Dc Rights","values":["M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission."]},{"key":"dc:rights.uri","label":"Rights URI","values":["http://dspace.mit.edu/handle/1721.1/7582"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://hdl.handle.net/1721.1/44839"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description","label":"Description","values":["Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Nuclear Science and Engineering, 2008.","Includes bibliographical references (leaves 48-49)."]},{"key":"dc:description.abstract","label":"Abstract","values":["Nanofluids are engineered fluids that contain a suspension of nanoparticles in a pure substance. Nanoparticles can be any variety of metals, metal oxides, or ceramics. They have been shown to increase heat transfer properties such as thermal conductivity, convective heat transfer, and critical heat flux(CHF). An optical probe used to detect phase was used to measure the void fraction during boiling, from which the macrolayer thickness can be derived. The optical probe was verified to have an error of 11.9% and 10.4% for measuring bubble diameter in water and R-123, respectively, and an error of 5.2% and 7.1% for measuring velocity in water and R-123. The macrolayer dryout theory of CHF was tested by investigating the change in macrolayer thickness for different heat fluxes in de-ionized (DI) water and 0.01% (by volume) SiO₂nanofluid. A current controlled power source heated a sandblasted, stainless steel plate resting in an isothermal bath. The silica nanofluid had a CHF enhancement of 82% over the DI water along with a slightly higher (20% enhancement) heat transfer coefficient. The macrolayer thickness, as measured by the optical probe, at a comparable heat flux was much larger than the DI water, possibly due to the increased wettability of the heater caused by the deposition of nanoparticles on the heater. This trend is in agreement with prediction of existing theory."]},{"key":"dc:description.degree","label":"Dc Description Degree","values":["S.B."]},{"key":"dc:title","label":"Title","values":["Measurement of near-surface void fraction and macrolayer thickness in boiling water and silica-based nanofluid"]}]}],"canonical_facts":{"dc:contributor.advisor":["Jacopo Buongiorno and Lin-Wen Hu."],"dc:contributor.department":["Massachusetts Institute of Technology. Dept. of Nuclear Science and Engineering."],"dc:contributor.other":["Massachusetts Institute of Technology. Dept. of Nuclear Science and Engineering."],"dc:creator":["Lerch Andrew (Andrew J.)"],"dc:date.accessioned":["2009-03-16T19:49:31Z"],"dc:date.available":["2009-03-16T19:49:31Z"],"dc:date.issued":["2008"],"dc:description":["Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Nuclear Science and Engineering, 2008.","Includes bibliographical references (leaves 48-49)."],"dc:description.abstract":["Nanofluids are engineered fluids that contain a suspension of nanoparticles in a pure substance. Nanoparticles can be any variety of metals, metal oxides, or ceramics. They have been shown to increase heat transfer properties such as thermal conductivity, convective heat transfer, and critical heat flux(CHF). An optical probe used to detect phase was used to measure the void fraction during boiling, from which the macrolayer thickness can be derived. The optical probe was verified to have an error of 11.9% and 10.4% for measuring bubble diameter in water and R-123, respectively, and an error of 5.2% and 7.1% for measuring velocity in water and R-123. The macrolayer dryout theory of CHF was tested by investigating the change in macrolayer thickness for different heat fluxes in de-ionized (DI) water and 0.01% (by volume) SiO₂nanofluid. A current controlled power source heated a sandblasted, stainless steel plate resting in an isothermal bath. The silica nanofluid had a CHF enhancement of 82% over the DI water along with a slightly higher (20% enhancement) heat transfer coefficient. The macrolayer thickness, as measured by the optical probe, at a comparable heat flux was much larger than the DI water, possibly due to the increased wettability of the heater caused by the deposition of nanoparticles on the heater. This trend is in agreement with prediction of existing theory."],"dc:description.degree":["S.B."],"dc:identifier.uri":["http://hdl.handle.net/1721.1/44839"],"dc:language.iso":["eng"],"dc:publisher":["Massachusetts Institute of Technology"],"dc:rights":["M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission."],"dc:rights.uri":["http://dspace.mit.edu/handle/1721.1/7582"],"dc:subject":["Nuclear Science and Engineering."],"dc:title":["Measurement of near-surface void fraction and macrolayer thickness in boiling water and silica-based nanofluid"],"dc:type":["Thesis"]},"updated_at":"2026-07-22T22:22:27Z"}