Simulation of spike stall inception in a radial vanted diffuser

In turbocharger application bleed air at impeller exit is typically used to seal bearing compartments and to balance axial thrust in the rotor. It was previously shown that this bleed air can have a significant impact on both compressor performance and stability. Experiments suggest that spike stall inception in centrifugal compressors can be formed by a vaned diffuser. To address these issues, a numerical study on an advanced, vaned-diffuser centrifugal compressor was conducted to investigate stall inception. A steady three-dimensional Reynolds-averaged Navier-Stokes simulation using a mixing plane was carried out first to evaluate the effects of bleed air at impeller exit on stage and diffuser subcomponent performance. The steady simulation was compared with experimental measurements and did not show significant changes in stage and subcomponent performance due to leakage flow as observed in the experiments, indicating the importance of unsteady flow effects in the vaneless space and adjacent bleed cavity. Next, an unsteady three-dimensional Reynolds-averaged Navier-stokes simulation was carried out on four vaned diffuser passages to investigate the response of the diffuser flow field to short wavelength inlet disturbances in total pressure. The simulation employed a new approach, using circumferentially-averaged diffuser inlet conditions obtained from the steady stage simulation, eliminating the impeller and significantly reducing the computational time. This method was capable of simulating spike-like stall precursors rotating at 66% rotor speed which formed in response to inlet flow disturbances. The results represent a first numerical simulation of rotating spike-like flow disturbances in a radial vaned diffuser, and suggest that the spike stall precursors are formed by the vaned diffuser in absence of a tip leakage flow as it can occur in the rotors of axial compressors.

Department dc:contributor.department

Massachusetts Institute of Technology. Dept. of Aeronautics and Astronautics.

Grantor dc:publisher

Massachusetts Institute of Technology

Year dc:date.issued

2007

Author dc:creator

• Hill, Raymond Andrew, IV

Advisor dc:contributor.advisor

• Zoltan S. Spakovszky.

• Aeronautics and Astronautics.

Statement dc:rights

• M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.

Licence dc:rights.uri

• http://dspace.mit.edu/handle/1721.1/7582

Language dc:language.iso

eng

Handle dc:identifier.uri

http://hdl.handle.net/1721.1/42048

OAI identifier oai:identifier

oai:dspace.mit.edu:1721.1/42048