Back to results

Massachusetts Institute of Technology

An energy efficient CMOS interface to carbon nanotube sensor arrays

Abstract

dc:description.abstract

A carbon nanotube is considered as a candidate for a next-generation chemical sensor. CNT sensors are attractive as they allow room-temperature sensing of chemicals. From the system perspective, this signifies that the sensor system does not require any micro hotplates, which are one of the major sources of power dissipation in other types of sensor systems. Nevertheless, a poor control of the CNT resistance poses a constraint on the attainable energy efficiency of the sensor platform. An investigation on the CNT sensors shows that the dynamic range of the interface should be 17 bits, while the resolution at each base resistance should be 7 bits. The proposed CMOS interface extends upon the previously published work to optimize the energy performance through both the architecture and circuit level innovations. The 17-bit dynamic range is attained by distributing the requirement into a 10-bit Analog-to-Digital Converter (ADC) and a 8-bit Digital-to-Analog Converter (DAC). An extra 1-bit leaves room for any unaccounted subblock performance error. Several system-level all-digital calibration schemes are proposed to account for DAC nonlinearity, ADC offset voltage, and a large variation in CNT base resistance. Circuit level techniques are employed to decrease the leakage current in the sensitive frontend node, to decrease the energy consumption of the ADC, and to efficiently control the DAC. The interface circuit is fabricated in 0.18 /m CMOS technology, and can operate at 1.83 kS/s sampling rate at 32 pW worst case power. The resistance measurement error across the whole dynamic range is less than 1.34% after calibration. A functionality of the full chemical sensor system has been demonstrated to validate the concepts introduced in this thesis.

Degree

thesis:*
Department dc:contributor.department
Massachusetts Institute of Technology. Dept. of Electrical Engineering and Computer Science.
Grantor dc:publisher
Massachusetts Institute of Technology
Year dc:date.issued
2007

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Cho, Taeg Sang
Advisor dc:contributor.advisor
  • Anantha P. Chandrakasan.

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
Language dc:language.iso
eng

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/1721.1/40519
OAI identifier oai:identifier
oai:dspace.mit.edu:1721.1/40519

Chain of custody

source
Harvested from
MIT
Base URL
dspace.mit.edu/oai/request
Last updated
2026-07-22
Source record
OAI-PMH GetRecord
citation

Cho, Taeg Sang. An energy efficient CMOS interface to carbon nanotube sensor arrays. Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/40519