Back to results

Massachusetts Institute of Technology

Design of a Very High Frequency dc-dc boost converter

Abstract

dc:description.abstract

Passive component volume is a perennial concern in power conversion. With new circuit architectures operating at extreme high frequencies it becomes possible to miniaturize the passive components needed for a power converter, and to achieve dramatic improvements in converter transient performance. This thesis focuses on the development of a Very High Frequency (VHF, 30 - 300 MHz) dc-dc boost converter using a MOSFET fabricated from a typical power process. Modeling and design studies reveal the possibility of building VHF dc-dc converters operable over the full automotive input voltage range (8 - 18 V) with transistors in a 50 V power process, through use of newly-developed resonant circuit topologies designed to minimize transistor voltage stress. Based on this, a study of the design of automotive boost converters was undertaken (e.g., for LED headlamp drivers at output voltages in the range of 22 - 33 V.) Two VHF boost converter prototypes using a [Phi]2 resonant boost topology were developed. The first design used an off the shelf RF power MOSFET, while the second uses a MOSFET fabricated in a BCD process with no special modifications.

Degree

thesis:*
Department dc:contributor.department
Massachusetts Institute of Technology. Dept. of Electrical Engineering and Computer Science.
Grantor dc:publisher
Massachusetts Institute of Technology
Year dc:date.issued
2007

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Sagneri, Anthony (Anthony David)
Advisor dc:contributor.advisor
  • David J. Perreault.

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
Language dc:language.iso
eng

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/1721.1/38664
OAI identifier oai:identifier
oai:dspace.mit.edu:1721.1/38664

Chain of custody

source
Harvested from
MIT
Base URL
dspace.mit.edu/oai/request
Last updated
2026-07-22
Source record
OAI-PMH GetRecord
citation

Sagneri, Anthony (Anthony David). Design of a Very High Frequency dc-dc boost converter. Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/38664