{"id":{"repo_id":"mit","oai_identifier":"oai:dspace.mit.edu:1721.1/36750"},"canonical_url":"https://search.dev.ndltd.org/etd/mit/oai:dspace.mit.edu:1721.1/36750","repository":{"repo_id":"mit","name":"MIT","base_url":"https://dspace.mit.edu/oai/request"},"display":{"title":"Peanut oil press for developing countries","abstract":"Despite the problems with obesity that the United States is facing today, malnutrition, caused in part by severely low dietary fat consumption, remains a problem among many people living in Sub-Saharan Africa. According to the World Health Organization, one third of people in developing countries are malnourished as well as vitamin or mineral deficient. While villagers do not have access to commercially produced vegetable oil (a common source of dietary fat), nor are industrial scale oil extraction methods appropriate for small scale production. As a result, they turn to traditional methods, such as a mortar and pestle, to extract oil from peanuts, sunflower seeds, and other oil bearing seeds and nuts. This process is both time and labor intensive, and still does not yield sufficient amounts of oil to satisfy the need for it. The need for a small scale press is clear. This thesis introduces a simple design which achieves a yield of 46.9 mL per cup (U.S.) which matches the yield produced using industrial technologies. This corresponds to 153% increase in yield and 38.5% increase in rate over using traditional methods such as a mortar and pestle. The design consists of two fixed plates connected by four rods, with a third plate which slides along the four guide rods.","abstract_html":"Despite the problems with obesity that the United States is facing today, malnutrition, caused in part by severely low dietary fat consumption, remains a problem among many people living in Sub-Saharan Africa. According to the World Health Organization, one third of people in developing countries are malnourished as well as vitamin or mineral deficient. While villagers do not have access to commercially produced vegetable oil (a common source of dietary fat), nor are industrial scale oil extraction methods appropriate for small scale production. As a result, they turn to traditional methods, such as a mortar and pestle, to extract oil from peanuts, sunflower seeds, and other oil bearing seeds and nuts. This process is both time and labor intensive, and still does not yield sufficient amounts of oil to satisfy the need for it. The need for a small scale press is clear. This thesis introduces a simple design which achieves a yield of 46.9 mL per cup (U.S.) which matches the yield produced using industrial technologies. This corresponds to 153% increase in yield and 38.5% increase in rate over using traditional methods such as a mortar and pestle. The design consists of two fixed plates connected by four rods, with a third plate which slides along the four guide rods.","abstract_has_math":false,"creators":["Jain, Neera, S.B. Massachusetts Institute of Technology","Lee, Somin"],"institution":"Massachusetts Institute of Technology","degree_name":null,"degree_level":null,"degree_discipline":null,"degree_department":"Massachusetts Institute of Technology. Dept. of Mechanical Engineering.","school":null,"contributors":[],"advisors":["David Wallace."],"committee_chairs":[],"committee_members":[],"year":2006,"date_issued":"2006","date_published":"2006","updated_at":"2026-07-22T22:22:06Z","subjects":["Mechanical Engineering."],"languages":["eng"],"rights":["M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission."],"rights_urls":["http://dspace.mit.edu/handle/1721.1/7582"],"identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/1721.1/36750","outbound_label":"Handle","outbound_source":"dc:identifier.uri"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.advisor","label":"Advisor","values":["David Wallace."]},{"key":"dc:contributor.department","label":"Department","values":["Massachusetts Institute of Technology. Dept. of Mechanical Engineering."]},{"key":"dc:contributor.other","label":"Dc Contributor Other","values":["Massachusetts Institute of Technology. Dept. of Mechanical Engineering."]},{"key":"dc:creator","label":"Author","values":["Jain, Neera, S.B. Massachusetts Institute of Technology","Lee, Somin"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2007-03-12T17:50:18Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2007-03-12T17:50:18Z"]},{"key":"dc:date.issued","label":"Date","values":["2006"]},{"key":"dc:publisher","label":"Institution","values":["Massachusetts Institute of Technology"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Mechanical Engineering."]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["eng"]},{"key":"dc:rights","label":"Dc Rights","values":["M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission."]},{"key":"dc:rights.uri","label":"Rights URI","values":["http://dspace.mit.edu/handle/1721.1/7582"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://hdl.handle.net/1721.1/36750"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description","label":"Description","values":["Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2006.","Includes bibliographical references (leaves 34-35)."]},{"key":"dc:description.abstract","label":"Abstract","values":["Despite the problems with obesity that the United States is facing today, malnutrition, caused in part by severely low dietary fat consumption, remains a problem among many people living in Sub-Saharan Africa. According to the World Health Organization, one third of people in developing countries are malnourished as well as vitamin or mineral deficient. While villagers do not have access to commercially produced vegetable oil (a common source of dietary fat), nor are industrial scale oil extraction methods appropriate for small scale production. As a result, they turn to traditional methods, such as a mortar and pestle, to extract oil from peanuts, sunflower seeds, and other oil bearing seeds and nuts. This process is both time and labor intensive, and still does not yield sufficient amounts of oil to satisfy the need for it. The need for a small scale press is clear. This thesis introduces a simple design which achieves a yield of 46.9 mL per cup (U.S.) which matches the yield produced using industrial technologies. This corresponds to 153% increase in yield and 38.5% increase in rate over using traditional methods such as a mortar and pestle. The design consists of two fixed plates connected by four rods, with a third plate which slides along the four guide rods.","(cont.) A standard scissor jack is the mechanism by which the necessary pressure of 800-1000 psi is generated to extract the oil. A peanut container with a removable bottom holds the peanuts as they are pressed, and holes drilled into its cylindrical face allow the oil to spill out into a collection dish underneath the container. The entire design is compact, with a footprint of one square foot and a height of 22 inches. This is 12 times smaller than the Beilenberg ram press, the standard for small scale presses currently used in developing countries. Experimental results of the loading profile as function of time show that the jack does not need to be turned continuously once the oil begins to appear. This requires significantly less strength than current methods of oil extraction. Although future work is recommended to further develop and improve the press, it shows promise of alleviating the need for such a device in many impoverished parts of the world."]},{"key":"dc:description.degree","label":"Dc Description Degree","values":["S.B."]},{"key":"dc:title","label":"Title","values":["Peanut oil press for developing countries"]}]}],"canonical_facts":{"dc:contributor.advisor":["David Wallace."],"dc:contributor.department":["Massachusetts Institute of Technology. Dept. of Mechanical Engineering."],"dc:contributor.other":["Massachusetts Institute of Technology. Dept. of Mechanical Engineering."],"dc:creator":["Jain, Neera, S.B. Massachusetts Institute of Technology","Lee, Somin"],"dc:date.accessioned":["2007-03-12T17:50:18Z"],"dc:date.available":["2007-03-12T17:50:18Z"],"dc:date.issued":["2006"],"dc:description":["Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2006.","Includes bibliographical references (leaves 34-35)."],"dc:description.abstract":["Despite the problems with obesity that the United States is facing today, malnutrition, caused in part by severely low dietary fat consumption, remains a problem among many people living in Sub-Saharan Africa. According to the World Health Organization, one third of people in developing countries are malnourished as well as vitamin or mineral deficient. While villagers do not have access to commercially produced vegetable oil (a common source of dietary fat), nor are industrial scale oil extraction methods appropriate for small scale production. As a result, they turn to traditional methods, such as a mortar and pestle, to extract oil from peanuts, sunflower seeds, and other oil bearing seeds and nuts. This process is both time and labor intensive, and still does not yield sufficient amounts of oil to satisfy the need for it. The need for a small scale press is clear. This thesis introduces a simple design which achieves a yield of 46.9 mL per cup (U.S.) which matches the yield produced using industrial technologies. This corresponds to 153% increase in yield and 38.5% increase in rate over using traditional methods such as a mortar and pestle. The design consists of two fixed plates connected by four rods, with a third plate which slides along the four guide rods.","(cont.) A standard scissor jack is the mechanism by which the necessary pressure of 800-1000 psi is generated to extract the oil. A peanut container with a removable bottom holds the peanuts as they are pressed, and holes drilled into its cylindrical face allow the oil to spill out into a collection dish underneath the container. The entire design is compact, with a footprint of one square foot and a height of 22 inches. This is 12 times smaller than the Beilenberg ram press, the standard for small scale presses currently used in developing countries. Experimental results of the loading profile as function of time show that the jack does not need to be turned continuously once the oil begins to appear. This requires significantly less strength than current methods of oil extraction. Although future work is recommended to further develop and improve the press, it shows promise of alleviating the need for such a device in many impoverished parts of the world."],"dc:description.degree":["S.B."],"dc:identifier.uri":["http://hdl.handle.net/1721.1/36750"],"dc:language.iso":["eng"],"dc:publisher":["Massachusetts Institute of Technology"],"dc:rights":["M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission."],"dc:rights.uri":["http://dspace.mit.edu/handle/1721.1/7582"],"dc:subject":["Mechanical Engineering."],"dc:title":["Peanut oil press for developing countries"],"dc:type":["Thesis"]},"updated_at":"2026-07-22T22:22:06Z"}