Back to results

Massachusetts Institute of Technology

Design and characterization of a low cost dual differential proving ring force sensor utilizing Hall-effect sensors

Abstract

dc:description.abstract

A novel dual differential hall-effect based proving ring force sensor has been designed, manufactured, and tested. Strain gauge based force sensors are among the most common methods of measuring static and dynamic forces, yet they suffer from a wide array of negative attributes including: high cost due to signal amplification instrumentation, high temperature sensitivity, and only moderate dynamic range. The goal of the research herein described was to design and test a low cost, high dynamic range force sensor. Hall-Effect sensors have high bandwidth (>100 kHz), a wide dynamic range, are low in cost (<0.5$), and are ideally suited to dynamic and static force measurements. Proving rings - diametrally loaded hoops of metal, have long been used to measure force yet suffer many setbacks due to their historical designs utilizing mechanical and strain gauge methods of strain detection. A novel nested proving ring flexure has been combined with hall-effect sensors to fulfill the design requirements of a low cost and robust force sensor. Initial data demonstrates that the nested proving ring force sensor herein described is capable of resolving forces of in the range of 0 to 30 Newtons with an accuracy of 0.235 Newtons, all at a potential mass-manufactured cost of U.S. $10.00 per unit.

Degree

thesis:*
Department dc:contributor.department
Massachusetts Institute of Technology. Dept. of Mechanical Engineering.
Grantor dc:publisher
Massachusetts Institute of Technology
Year dc:date.issued
2006

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Rivest, Christopher W. (Christopher Warren)
Advisor dc:contributor.advisor
  • Ian W. Hunter.

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
Language dc:language.iso
eng

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/1721.1/36709
OAI identifier oai:identifier
oai:dspace.mit.edu:1721.1/36709

Chain of custody

source
Harvested from
MIT
Base URL
dspace.mit.edu/oai/request
Last updated
2026-07-22
Source record
OAI-PMH GetRecord
citation

Rivest, Christopher W. (Christopher Warren). Design and characterization of a low cost dual differential proving ring force sensor utilizing Hall-effect sensors. Massachusetts Institute of Technology, 2006. http://hdl.handle.net/1721.1/36709