{"id":{"repo_id":"mit","oai_identifier":"oai:dspace.mit.edu:1721.1/32948"},"canonical_url":"https://search.dev.ndltd.org/etd/mit/oai:dspace.mit.edu:1721.1/32948","repository":{"repo_id":"mit","name":"MIT","base_url":"https://dspace.mit.edu/oai/request"},"display":{"title":"Finite element simulation and parameter optimization of a flexible tactile pressure sensor array","abstract":"A finite element model was developed to optimize design of a flexible tactile sensor. The sensor consists of layers of thin-film copper and PDMS, and the model can be used to determine the effects on sensor sensitivity and durability of variations in material properties and geometry. The model was used to study the effect of variations in copper thickness. Four copper thicknesses, 0.3[mu]m, 0.5[mu]m, 3[mu]m, and 9[mu]m, were analyzed under a range of pressure loads. The thickness of the copper affected both the stress in the material and the displacement of the copper when a pressure load was applied to the sensor model. The stress in the sensor was highest for 3[mu]m copper, potentially causing decreased durability in this sensor. The separation between the copper strips beneath the pressure load was highest for 9[mu]m copper, so this sensor may have lower accuracy for small loads. Thin copper strips are challenging to manufacture, so the largest but most accurate and durable copper strip thickness, 0.5[mu]m, is recommended from this analysis.","abstract_html":"A finite element model was developed to optimize design of a flexible tactile sensor. The sensor consists of layers of thin-film copper and PDMS, and the model can be used to determine the effects on sensor sensitivity and durability of variations in material properties and geometry. The model was used to study the effect of variations in copper thickness. Four copper thicknesses, 0.3[mu]m, 0.5[mu]m, 3[mu]m, and 9[mu]m, were analyzed under a range of pressure loads. The thickness of the copper affected both the stress in the material and the displacement of the copper when a pressure load was applied to the sensor model. The stress in the sensor was highest for 3[mu]m copper, potentially causing decreased durability in this sensor. The separation between the copper strips beneath the pressure load was highest for 9[mu]m copper, so this sensor may have lower accuracy for small loads. Thin copper strips are challenging to manufacture, so the largest but most accurate and durable copper strip thickness, 0.5[mu]m, is recommended from this analysis.","abstract_has_math":false,"creators":["Lee, Shira M. (Shira Miriam)"],"institution":"Massachusetts Institute of Technology","degree_name":null,"degree_level":null,"degree_discipline":null,"degree_department":"Massachusetts Institute of Technology. Dept. of Mechanical Engineering.","school":null,"contributors":[],"advisors":["Mandayam Srinivasan."],"committee_chairs":[],"committee_members":[],"year":2005,"date_issued":"2005","date_published":"2005","updated_at":"2026-07-22T22:22:27Z","subjects":["Mechanical Engineering."],"languages":["eng"],"rights":["M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission."],"rights_urls":["http://dspace.mit.edu/handle/1721.1/7582"],"identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/1721.1/32948","outbound_label":"Handle","outbound_source":"dc:identifier.uri"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.advisor","label":"Advisor","values":["Mandayam Srinivasan."]},{"key":"dc:contributor.department","label":"Department","values":["Massachusetts Institute of Technology. Dept. of Mechanical Engineering."]},{"key":"dc:contributor.other","label":"Dc Contributor Other","values":["Massachusetts Institute of Technology. Dept. of Mechanical Engineering."]},{"key":"dc:creator","label":"Author","values":["Lee, Shira M. (Shira Miriam)"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2006-05-15T20:41:14Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2006-05-15T20:41:14Z"]},{"key":"dc:date.issued","label":"Date","values":["2005"]},{"key":"dc:publisher","label":"Institution","values":["Massachusetts Institute of Technology"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Mechanical Engineering."]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["eng"]},{"key":"dc:rights","label":"Dc Rights","values":["M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission."]},{"key":"dc:rights.uri","label":"Rights URI","values":["http://dspace.mit.edu/handle/1721.1/7582"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://hdl.handle.net/1721.1/32948"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description","label":"Description","values":["Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2005.","Includes bibliographical references."]},{"key":"dc:description.abstract","label":"Abstract","values":["A finite element model was developed to optimize design of a flexible tactile sensor. The sensor consists of layers of thin-film copper and PDMS, and the model can be used to determine the effects on sensor sensitivity and durability of variations in material properties and geometry. The model was used to study the effect of variations in copper thickness. Four copper thicknesses, 0.3[mu]m, 0.5[mu]m, 3[mu]m, and 9[mu]m, were analyzed under a range of pressure loads. The thickness of the copper affected both the stress in the material and the displacement of the copper when a pressure load was applied to the sensor model. The stress in the sensor was highest for 3[mu]m copper, potentially causing decreased durability in this sensor. The separation between the copper strips beneath the pressure load was highest for 9[mu]m copper, so this sensor may have lower accuracy for small loads. Thin copper strips are challenging to manufacture, so the largest but most accurate and durable copper strip thickness, 0.5[mu]m, is recommended from this analysis."]},{"key":"dc:description.degree","label":"Dc Description Degree","values":["S.B."]},{"key":"dc:format.mimetype","label":"Dc Format Mimetype","values":["application/pdf"]},{"key":"dc:title","label":"Title","values":["Finite element simulation and parameter optimization of a flexible tactile pressure sensor array"]}]}],"canonical_facts":{"dc:contributor.advisor":["Mandayam Srinivasan."],"dc:contributor.department":["Massachusetts Institute of Technology. Dept. of Mechanical Engineering."],"dc:contributor.other":["Massachusetts Institute of Technology. Dept. of Mechanical Engineering."],"dc:creator":["Lee, Shira M. (Shira Miriam)"],"dc:date.accessioned":["2006-05-15T20:41:14Z"],"dc:date.available":["2006-05-15T20:41:14Z"],"dc:date.issued":["2005"],"dc:description":["Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2005.","Includes bibliographical references."],"dc:description.abstract":["A finite element model was developed to optimize design of a flexible tactile sensor. The sensor consists of layers of thin-film copper and PDMS, and the model can be used to determine the effects on sensor sensitivity and durability of variations in material properties and geometry. The model was used to study the effect of variations in copper thickness. Four copper thicknesses, 0.3[mu]m, 0.5[mu]m, 3[mu]m, and 9[mu]m, were analyzed under a range of pressure loads. The thickness of the copper affected both the stress in the material and the displacement of the copper when a pressure load was applied to the sensor model. The stress in the sensor was highest for 3[mu]m copper, potentially causing decreased durability in this sensor. The separation between the copper strips beneath the pressure load was highest for 9[mu]m copper, so this sensor may have lower accuracy for small loads. Thin copper strips are challenging to manufacture, so the largest but most accurate and durable copper strip thickness, 0.5[mu]m, is recommended from this analysis."],"dc:description.degree":["S.B."],"dc:format.mimetype":["application/pdf"],"dc:identifier.uri":["http://hdl.handle.net/1721.1/32948"],"dc:language.iso":["eng"],"dc:publisher":["Massachusetts Institute of Technology"],"dc:rights":["M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission."],"dc:rights.uri":["http://dspace.mit.edu/handle/1721.1/7582"],"dc:subject":["Mechanical Engineering."],"dc:title":["Finite element simulation and parameter optimization of a flexible tactile pressure sensor array"],"dc:type":["Thesis"]},"updated_at":"2026-07-22T22:22:27Z"}