Numerical simulation of a single emitter colloid thruster in pure droplet cone-jet mode

New Scientific missions call for emerging propulsion technologies capable of fine tuning a satellite's relative position and cancelling small disturbances. One candidate technology that holds promise for these type of missions are colloidal thrusters. These thrusters are electrostatic accelerators which do not rely on gas ionization (plasma), are intrinsically small, and operate at low power levels, while having small plume divergence angles to avoid spacecraft (S/C) contamination problems. Colloid thrusters deliver low thrust (0.1 [mu]N/emitter) which can be multiplied many times over by integrating them in microfabricated arrays. An important advantage is that with proper choice of propellant and operating regime their specific impulse can be tailored from 500-7000 seconds making them viable candidates for a multitude of mission profiles. In the past many research groups have worked on developing colloid thrusters; however, their basic physics are still not completely understood. For this reason, we have undertaken the development of a numerical simulation of a colloid thruster to complement experimental and analytical research in the area. The goal of this project has been to create a flexible numerical tool to compute single-emitter current, droplet size, velocity, electric field strengths for a given geometry, fluid, flow rate, and voltage. We have approached this issue from the numerical perspective by developing a simulation of a colloid thruster operating in the single cone-jet pure droplet mode. Our numerical simulation models the cone-jet transition region of the colloid jet; starting from the needle up to the extractor grid, thus reproducing a typical electrospray experimental configuration.

Department dc:contributor.department

Massachusetts Institute of Technology. Dept. of Mechanical Engineering.

Grantor dc:publisher

Massachusetts Institute of Technology

Year dc:date.issued

2005

Author dc:creator

• Carretero Benignos, Jorge Alejandro, 1972-

Advisor dc:contributor.advisor

• Manuel Martínez-Sánchez.

• Mechanical Engineering.

Statement dc:rights

• M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.

Licence dc:rights.uri

• http://dspace.mit.edu/handle/1721.1/7582

Language dc:language.iso

eng

Handle dc:identifier.uri

http://hdl.handle.net/1721.1/30348

OAI identifier oai:identifier

oai:dspace.mit.edu:1721.1/30348