Back to results

Massachusetts Institute of Technology

Closed-loop, variable-valve-timing control of a controlled-auto-ignition engine

Abstract

dc:description.abstract

The objective of this study was to develop a closed-loop controller for use on a Controlled-Auto- Ignition (CAI) / Spark-Ignition (SI) mixed mode engine equipped with a variable-valve-timing (VVT) mechanism. The controller in this study was designed only for use in the CAI regime. Operation in the SI regime and control of transitions between the CAI and SI modes were considered to be outside the scope of this study. The first part of the study involved creating an open-loop feedforward controller. This controller transformed desired engine output into required input based on a mapping of the steady-state output-to-input transfer function at constant engine speed and intake manifold temperature. Since the mapping domain was limited, the open-loop controller did not compensate for changes in operating conditions. This controller was used to study the transient response of the engine. Using the transient data, a mathematical representation of the engine output; i.e. mean effective pressure (MEP) and fuel-air equivalence ratio (), its in-cylinder state; i.e. mass of fuel, mass of air, percent mass exhaust gas residual and pressure, and input to the engine; i.e. mass of fuel, intake valve closing and exhaust valve closing, was developed. This representation showed that the CAI engine is effectively a quasi-static system in that the output of any given cycle depends almost entirely on the in-cylinder state at the start of that cycle, and that the latter depends almost entirely on prior cycle input. The quasi-static nature of the CAI engine effectively defined the architecture of the closed-loop controller; namely, a feedforward and feedback sub-controllers. A numerical model of the CAI engine and a closed-loop control system were developed.

Degree

thesis:*
Department dc:contributor.department
Massachusetts Institute of Technology. Dept. of Mechanical Engineering.
Grantor dc:publisher
Massachusetts Institute of Technology
Year dc:date.issued
2004

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Matthews, Jeffrey A., 1970-
Advisor dc:contributor.advisor
  • Wai K. Cheng.

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
Language dc:language.iso
eng

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/1721.1/30324
OAI identifier oai:identifier
oai:dspace.mit.edu:1721.1/30324

Chain of custody

source
Harvested from
MIT
Base URL
dspace.mit.edu/oai/request
Last updated
2026-07-22
Source record
OAI-PMH GetRecord
citation

Matthews, Jeffrey A., 1970-. Closed-loop, variable-valve-timing control of a controlled-auto-ignition engine. Massachusetts Institute of Technology, 2004. http://hdl.handle.net/1721.1/30324