Back to results

Massachusetts Institute of Technology

Fabrication and testing of an infrared spectral control component for thermophotovoltaic power conversion applications

Abstract

dc:description.abstract

Thermophotovoltaic (TPV) power conversion is the direct conversion of thermal radiation to electricity. Conceptually, TPV power conversion is a very elegant means of energy conversion. A thermal source emits a radiative spectrum, which is incident upon a photovoltaic (PV) diode. The PV diode then converts some of the incident photons to electricity. The photons which are converted to electricity have energies greater than the electronic bandgap of the material from which the PV diode is fabricated. Unfortunately the thermal sources used in TPV systems are typically broadband, meaning that a significant amount of the emitted radiation cannot be converted to electricity because the photons are not energetic enough to produce electron-hole pairs in the PV diode. This unconvertible radiation is dissipated as heat in the PV diode and represents a very large loss in a TPV system's conversion efficiency. This thesis describes the development of a spectral control component which can be used to filter the radiation emitted from a TPV system's thermal source, such that only convertible radiation is incident upon the PV diode. The theoretical analysis of filter designs based on a Si/SiO₂ dielectric stack is described in this text. The methods and processes used to fabricate physical samples of the spectral control component are discussed. The results of the spectral analysis of the physical samples are documented and a comparison between the predicted performance of the filter designs and the measured performance of the fabricated filter samples is made.

Degree

thesis:*
Department dc:contributor.department
Massachusetts Institute of Technology. Dept. of Electrical Engineering and Computer Science.
Grantor dc:publisher
Massachusetts Institute of Technology
Year dc:date.issued
2004

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • O'Sullivan, Francis M. (Francis Martin), 1980-
Advisor dc:contributor.advisor
  • John G. Kassakian and Thomas Keim.

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/1721.1/28539
OAI identifier oai:identifier
oai:dspace.mit.edu:1721.1/28539

Chain of custody

source
Harvested from
MIT
Base URL
dspace.mit.edu/oai/request
Last updated
2026-07-22
Source record
OAI-PMH GetRecord
citation

O'Sullivan, Francis M. (Francis Martin), 1980-. Fabrication and testing of an infrared spectral control component for thermophotovoltaic power conversion applications. Massachusetts Institute of Technology, 2004. http://hdl.handle.net/1721.1/28539