Propulsion devices for locomotion at low-Reynolds number

We have designed, built, and tested three novel devices that use low-Reynolds number flows for self propulsion. The three-link swimmer is designed to swim through in a free viscous fluid using cyclic flipping motion of two rigid fins attached to a rigid midsection. Robosnail 1 uses lubrication pressures underneath a flexible, sinusoidally waving boundary to generate thrust, and Robosnail 2 uses five independently controlled translating feet segments to move on a layer of 8 percent Laponite, a shear thinning clay suspension which gives it the ability to adhere to and scale inclines and inverted surfaces. The three link swimmer was found to travel up to 0.034 body lengths per four-stroke cycle, Robosnail 1 was found to move at a speed of roughly half the wave speed of the foot (measured with respect to the snail), a result consistent for wave speeds between 0 and 2 cm/s. Robosnail 2 was able to move forward at all inclines from zero to 180 degrees inverted, with back-slip ranging from 40 to 80 percent.

Department dc:contributor.department

Massachusetts Institute of Technology. Dept. of Mechanical Engineering.

Grantor dc:publisher

Massachusetts Institute of Technology

Year dc:date.issued

2004

Author dc:creator

• Chan, Brian, 1980-

Advisor dc:contributor.advisor

• Anette Hosoi.

• Mechanical Engineering.

Statement dc:rights

• M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.

Licence dc:rights.uri

• http://dspace.mit.edu/handle/1721.1/7582

Language dc:language.iso

en_US

Handle dc:identifier.uri

http://hdl.handle.net/1721.1/27065

OAI identifier oai:identifier

oai:dspace.mit.edu:1721.1/27065