Anticipation nationwide risks to drinking water : predicting local scale contamination of community supply wells by gasoline additives

Only ten years after the increased addition of methyl-tert-butyl-ether (MTBE) to U.S. gasolines, nationwide MTBE contamination of thousands of drinking water supply wells has been widely documented, reflecting enormous environmental and economic costs. Due to its abundance in gasoline, high aqueous solubility, and slow degradation rate in aquifers, MTBE has migrated in significant quantities from subsurface gasoline spills to a substantial number of community and private drinking water wells in a short period of time. For the purposes of this project, it was hypothesized that the tendency for gasoline additives to contaminate subsurface drinking water resources could be accurately predicted a priori using a generalized transport model. A screening method was developed to predict both the migration times of gasoline constituents from a leaking underground fuel tank (LUFF) to a community drinking water supply well and expected contaminant levels in the well. A review of literature revealed that U.S. municipal drinking water supplies are typically found in shallow sand and gravel aquifers. A subsurface transport model was parameterized based on the proximity of community supply wells to LUFTs (1000 in); probable characteristics of sand and gravel aquifers; typical pumping rates of community supply wells (80 to 400 gal/min); and reasonable gasoline spill volumes from LUFTs (100 to 1000 gal). The transport model was tailored to individual solutes based on their estimated abundances in gasoline, gasoline-water partition coefficients (Kgw), and estimated organic matter-water partition coefficients (Kom). Transport calculations were conducted for 17 polar and four nonpolar compounds currently proposed for or found in contemporary U.S. gasolines, including MTBE, ethanol, and methanol. Subsurface degradation processes were not considered. The transport model predicted MTBE concentrations of 40 to 500 ppb in municipal wells, which compared favorably with observed well concentrations at a significant proportion of sites in the U.S. The transport model therefore captured the order of magnitude of observed MTBE contamination of municipal wells without any use of adjustable or "fitted" parameters. Subsurface transport calculations of gasoline constituents required prior knowledge or estimation of their gasoline-water partition coefficient and organic matterwater partition coefficients. In anticipation of the need to conduct transport calculations for novel or previously unstudied compounds, a review of methods for calculating or predicting solute partition coefficients in gasoline-water, organic matter-water, and octanol-water systems was conducted. Additionally, a new linear solvation energy relationship (LSER) was developed for estimating gasoline-water partition coefficients of organic compounds, having an estimated standard error of 0.22 log Kgw units.

Department dc:contributor.department

Massachusetts Institute of Technology. Dept. of Civil and Environmental Engineering.

Grantor dc:publisher

Massachusetts Institute of Technology

Year dc:date.issued

2001

Author dc:creator

• Arey, J. Samuel (Jeremy Samuel), 1975-

Advisor dc:contributor.advisor

• Philip M. Gschwend.

• Civil and Environmental Engineering.

Statement dc:rights

• M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.

Licence dc:rights.uri

• http://dspace.mit.edu/handle/1721.1/7582

Language dc:language.iso

eng

Handle dc:identifier.uri

http://hdl.handle.net/1721.1/17511

OAI identifier oai:identifier

oai:dspace.mit.edu:1721.1/17511