Evaporation from nanopores : probing interfacial transport

Evaporation, a commonly found phenomenon in nature, is widely used in thermal management, water purification, and steam generation as it takes advantage of the enthalpy of vaporization. Despite being extensively studied for decades, the fundamental understanding of evaporation, which is necessary for making full use of evaporation, remains limited up to date. It is in general difficult to experimentally characterize the interfacial heat and mass transfer during evaporation. In this thesis, we designed and microfabricated an ultrathin nanoporous membrane as an experimental platform to overcome some critical challenges including: (1) realizing accurate and yet non-invasive interface temperature measurement; (2) decoupling the interfacial transport resistance from the thermofluidic resistance in the liquid phase and the diffusion resistance in the vapor phase; and (3) mitigating the blockage risk of the liquid-vapor interface due to nonevaporative contaminants. Our nano device consisted of an ultrathin free-standing membrane (~200 nm thick) containing an array of nanopores (pore diameter ~100 nm). A gold layer deposited on the membrane served as an electric heater to induce evaporation as well as a resistive temperature detector to closely monitor the interface temperature. This configuration minimizes the thermofluidic resistance in the liquid and mitigates the contamination risk. We characterized evaporation from this nano device in air as well as pure vapor. We demonstrated interfacial heat fluxes of ~~500 W/cm² for evaporation in air, where we elucidated that the Maxwell- Stefan equation governed the overall transport instead of Fick's law, especially in the high flux regime. In vapor, we achieved kinetically limited evaporation with an interfacial heat transfer coefficient up to 54 kW/cm² K. We utilized the kinetic theory with the Boltzmann transport equation to model the evaporative transport. With both experiments and modeling, we demonstrated that the kinetic limit of evaporation is determined by the pressure ratio between the vapor in the far field and that generated by the interface. The improved fundamental understanding of evaporation that we gained indicates the significant promise of utilizing an ultrathin nanoporous design to achieve high heat fluxes for evaporation in thermal management, desalination, steam generation, and beyond.

Department dc:contributor.department

Massachusetts Institute of Technology. Department of Mechanical Engineering.

Grantor dc:publisher

Massachusetts Institute of Technology

Year dc:date.issued

2018

Author dc:creator

• Lu, Zhengmao

Advisor dc:contributor.advisor

• Evelyn N. Wang.

• Mechanical Engineering.

Statement dc:rights

• MIT theses are protected by copyright. They may be viewed, downloaded, or printed from this source but further reproduction or distribution in any format is prohibited without written permission.

Licence dc:rights.uri

• http://dspace.mit.edu/handle/1721.1/7582

Language dc:language.iso

eng

Handle dc:identifier.uri

http://hdl.handle.net/1721.1/118723

OAI identifier oai:identifier

oai:dspace.mit.edu:1721.1/118723