{"id":{"repo_id":"mit","oai_identifier":"oai:dspace.mit.edu:1721.1/108919"},"canonical_url":"https://search.dev.ndltd.org/etd/mit/oai:dspace.mit.edu:1721.1/108919","repository":{"repo_id":"mit","name":"MIT","base_url":"https://dspace.mit.edu/oai/request"},"display":{"title":"Wave energy converter design via a time-domain Rankine panel method","abstract":"Efficient design of energy converters heavily depends on the capacity of the designer to accurately predict the device's dynamic, which ultimately leads to the power extraction. This is specially true for wave energy converters (WEC), which usually present a high cost per kWh generated. In this thesis a particular WEC which uses a rotating mass for power extraction is studied. A numerical model for the prediction of its motion and power extraction is presented. The nonlinear dynamic model consists of a time-domain three dimensional Rankine panel method coupled, in the time integration, with a MATLAB algorithm which solves for the equations of the gyroscope and Power Take-Off (PTO). The former acts as a force block, calculating the forces due to the waves on the hull, which is then sent to the latter through TCP/IP, which couples the external dynamics and performs the time-integration using a 4th order Runge-Kutta method. With the proposed code, two case studies are examined. The first consists of two gyroscopes, rotating in opposite directions, to negate undesirable yaw effects on the WEC's hull. The device's optimum PTO damping value and flywheel spin are then shown, which change for different sea states. The second is a comparison against results from experimental testing of a 1:50 model at the Davidson Laboratory during the Wave Energy Prize.","abstract_html":"Efficient design of energy converters heavily depends on the capacity of the designer to accurately predict the device's dynamic, which ultimately leads to the power extraction. This is specially true for wave energy converters (WEC), which usually present a high cost per kWh generated. In this thesis a particular WEC which uses a rotating mass for power extraction is studied. A numerical model for the prediction of its motion and power extraction is presented. The nonlinear dynamic model consists of a time-domain three dimensional Rankine panel method coupled, in the time integration, with a MATLAB algorithm which solves for the equations of the gyroscope and Power Take-Off (PTO). The former acts as a force block, calculating the forces due to the waves on the hull, which is then sent to the latter through TCP/IP, which couples the external dynamics and performs the time-integration using a 4th order Runge-Kutta method. With the proposed code, two case studies are examined. The first consists of two gyroscopes, rotating in opposite directions, to negate undesirable yaw effects on the WEC's hull. The device's optimum PTO damping value and flywheel spin are then shown, which change for different sea states. The second is a comparison against results from experimental testing of a 1:50 model at the Davidson Laboratory during the Wave Energy Prize.","abstract_has_math":false,"creators":["Seixas de Medeiros, João"],"institution":"Massachusetts Institute of Technology","degree_name":null,"degree_level":null,"degree_discipline":null,"degree_department":"Massachusetts Institute of Technology. Department of Mechanical Engineering.","school":null,"contributors":[],"advisors":["Stefano Brizzolara."],"committee_chairs":[],"committee_members":[],"year":2017,"date_issued":"2017","date_published":"2017","updated_at":"2026-07-22T22:22:02Z","subjects":["Mechanical Engineering."],"languages":["eng"],"rights":["MIT theses are protected by copyright. They may be viewed, downloaded, or printed from this source but further reproduction or distribution in any format is prohibited without written permission."],"rights_urls":["http://dspace.mit.edu/handle/1721.1/7582"],"identifier_entries":[]},"links":{"outbound_url":"http://hdl.handle.net/1721.1/108919","outbound_label":"Handle","outbound_source":"dc:identifier.uri"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.advisor","label":"Advisor","values":["Stefano Brizzolara."]},{"key":"dc:contributor.department","label":"Department","values":["Massachusetts Institute of Technology. Department of Mechanical Engineering."]},{"key":"dc:contributor.other","label":"Dc Contributor Other","values":["Massachusetts Institute of Technology. Department of Mechanical Engineering."]},{"key":"dc:creator","label":"Author","values":["Seixas de Medeiros, João"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.accessioned","label":"Dc Date Accessioned","values":["2017-05-11T19:55:41Z"]},{"key":"dc:date.available","label":"Dc Date Available","values":["2017-05-11T19:55:41Z"]},{"key":"dc:date.issued","label":"Date","values":["2017"]},{"key":"dc:publisher","label":"Institution","values":["Massachusetts Institute of Technology"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Mechanical Engineering."]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.iso","label":"Language (ISO)","values":["eng"]},{"key":"dc:rights","label":"Dc Rights","values":["MIT theses are protected by copyright. They may be viewed, downloaded, or printed from this source but further reproduction or distribution in any format is prohibited without written permission."]},{"key":"dc:rights.uri","label":"Rights URI","values":["http://dspace.mit.edu/handle/1721.1/7582"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://hdl.handle.net/1721.1/108919"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description","label":"Description","values":["Thesis: S.M., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2017.","Cataloged from PDF version of thesis.","Includes bibliographical references (pages 111-115)."]},{"key":"dc:description.abstract","label":"Abstract","values":["Efficient design of energy converters heavily depends on the capacity of the designer to accurately predict the device's dynamic, which ultimately leads to the power extraction. This is specially true for wave energy converters (WEC), which usually present a high cost per kWh generated. In this thesis a particular WEC which uses a rotating mass for power extraction is studied. A numerical model for the prediction of its motion and power extraction is presented. The nonlinear dynamic model consists of a time-domain three dimensional Rankine panel method coupled, in the time integration, with a MATLAB algorithm which solves for the equations of the gyroscope and Power Take-Off (PTO). The former acts as a force block, calculating the forces due to the waves on the hull, which is then sent to the latter through TCP/IP, which couples the external dynamics and performs the time-integration using a 4th order Runge-Kutta method. With the proposed code, two case studies are examined. The first consists of two gyroscopes, rotating in opposite directions, to negate undesirable yaw effects on the WEC's hull. The device's optimum PTO damping value and flywheel spin are then shown, which change for different sea states. The second is a comparison against results from experimental testing of a 1:50 model at the Davidson Laboratory during the Wave Energy Prize."]},{"key":"dc:description.degree","label":"Dc Description Degree","values":["S.M."]},{"key":"dc:title","label":"Title","values":["Wave energy converter design via a time-domain Rankine panel method"]}]}],"canonical_facts":{"dc:contributor.advisor":["Stefano Brizzolara."],"dc:contributor.department":["Massachusetts Institute of Technology. Department of Mechanical Engineering."],"dc:contributor.other":["Massachusetts Institute of Technology. Department of Mechanical Engineering."],"dc:creator":["Seixas de Medeiros, João"],"dc:date.accessioned":["2017-05-11T19:55:41Z"],"dc:date.available":["2017-05-11T19:55:41Z"],"dc:date.issued":["2017"],"dc:description":["Thesis: S.M., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2017.","Cataloged from PDF version of thesis.","Includes bibliographical references (pages 111-115)."],"dc:description.abstract":["Efficient design of energy converters heavily depends on the capacity of the designer to accurately predict the device's dynamic, which ultimately leads to the power extraction. This is specially true for wave energy converters (WEC), which usually present a high cost per kWh generated. In this thesis a particular WEC which uses a rotating mass for power extraction is studied. A numerical model for the prediction of its motion and power extraction is presented. The nonlinear dynamic model consists of a time-domain three dimensional Rankine panel method coupled, in the time integration, with a MATLAB algorithm which solves for the equations of the gyroscope and Power Take-Off (PTO). The former acts as a force block, calculating the forces due to the waves on the hull, which is then sent to the latter through TCP/IP, which couples the external dynamics and performs the time-integration using a 4th order Runge-Kutta method. With the proposed code, two case studies are examined. The first consists of two gyroscopes, rotating in opposite directions, to negate undesirable yaw effects on the WEC's hull. The device's optimum PTO damping value and flywheel spin are then shown, which change for different sea states. The second is a comparison against results from experimental testing of a 1:50 model at the Davidson Laboratory during the Wave Energy Prize."],"dc:description.degree":["S.M."],"dc:identifier.uri":["http://hdl.handle.net/1721.1/108919"],"dc:language.iso":["eng"],"dc:publisher":["Massachusetts Institute of Technology"],"dc:rights":["MIT theses are protected by copyright. They may be viewed, downloaded, or printed from this source but further reproduction or distribution in any format is prohibited without written permission."],"dc:rights.uri":["http://dspace.mit.edu/handle/1721.1/7582"],"dc:subject":["Mechanical Engineering."],"dc:title":["Wave energy converter design via a time-domain Rankine panel method"],"dc:type":["Thesis"]},"updated_at":"2026-07-22T22:22:02Z"}