Injection pultrusion is an efficient and highly automated continuous process for high-quality, low-cost, high-volume manufacturing of composites. The main objective of this study is to analyze \"attached die configuration\" and \"detached die configuration\" for the better injection pultrusion process. In this work the impact of various processing parameters on complete wet out of composite parts is investigated in the attached die and detached die injection pultrusion with various chamber length considerations. The various processing parameters considered are pull speed, fiber volume fraction, resin viscosity, injection port location and compression ratio. 3-D finite volume technique is used to simulate the liquid resin flow through the fiber reinforcement in the injection pultrusion process. The purpose of the present work is to investigate the resin injection pressure needed to achieve complete wet-out, the corresponding maximum pressure inside the resin injection chamber and to predict the resin flow front by varying the length of injection chamber for different processing parameters.
","abstract_html":"<p>Injection pultrusion is an efficient and highly automated continuous process for high-quality, low-cost, high-volume manufacturing of composites. The main objective of this study is to analyze "attached die configuration" and "detached die configuration" for the better injection pultrusion process. In this work the impact of various processing parameters on complete wet out of composite parts is investigated in the attached die and detached die injection pultrusion with various chamber length considerations. The various processing parameters considered are pull speed, fiber volume fraction, resin viscosity, injection port location and compression ratio. 3-D finite volume technique is used to simulate the liquid resin flow through the fiber reinforcement in the injection pultrusion process. The purpose of the present work is to investigate the resin injection pressure needed to achieve complete wet-out, the corresponding maximum pressure inside the resin injection chamber and to predict the resin flow front by varying the length of injection chamber for different processing parameters.</p>","abstract_has_math":false,"creators":["Palikhel, Dinesh Raj"],"institution":null,"degree_name":"M.S. in Engineering Science","degree_level":"Thesis","degree_discipline":"Mechanical Engineering","degree_department":null,"school":null,"contributors":["Jeffrey A. Roux","Jagdish P. Sharma","Arunachalam Rajendran"],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2011,"date_issued":"2011-01-01T08:00:00Z","date_published":"2011-01-01T08:00:00Z","updated_at":"2026-07-24T03:06:44Z","subjects":["3 D Finite Volume","Numerical Model","attached die and detached die","injection pressure","maximum chamber wall pressure","Processing parameters","Pull Speed","Fiber Volume Fraction","Viscosity","resin injection pultrusion","Mechanical Engineering"],"languages":[],"rights":[],"rights_urls":[],"identifier_entries":[]},"links":{"outbound_url":"https://egrove.olemiss.edu/etd/1328","outbound_label":"Repository record","outbound_source":"dc:identifier"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Jeffrey A. Roux","Jagdish P. Sharma","Arunachalam Rajendran"]},{"key":"dc:creator","label":"Author","values":["Palikhel, Dinesh Raj"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.available","label":"Dc Date Available","values":["2019-07-19T07:00:00Z"]},{"key":"thesis:degree_discipline","label":"Discipline","values":["Mechanical Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Thesis"]},{"key":"thesis:degree_name","label":"Degree Name","values":["M.S. in Engineering Science"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["3 D Finite Volume","Numerical Model","attached die and detached die","injection pressure","maximum chamber wall pressure","Processing parameters","Pull Speed","Fiber Volume Fraction","Viscosity","resin injection pultrusion","Mechanical Engineering"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["https://egrove.olemiss.edu/etd/1328"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Injection pultrusion is an efficient and highly automated continuous process for high-quality, low-cost, high-volume manufacturing of composites. The main objective of this study is to analyze \"attached die configuration\" and \"detached die configuration\" for the better injection pultrusion process. In this work the impact of various processing parameters on complete wet out of composite parts is investigated in the attached die and detached die injection pultrusion with various chamber length considerations. The various processing parameters considered are pull speed, fiber volume fraction, resin viscosity, injection port location and compression ratio. 3-D finite volume technique is used to simulate the liquid resin flow through the fiber reinforcement in the injection pultrusion process. The purpose of the present work is to investigate the resin injection pressure needed to achieve complete wet-out, the corresponding maximum pressure inside the resin injection chamber and to predict the resin flow front by varying the length of injection chamber for different processing parameters.
"]},{"key":"dc:title","label":"Title","values":["Processing parameters and chamber length impact on detached die and attached die resin injection pultrusion"]}]}],"canonical_facts":{"dc:contributor":["Jeffrey A. Roux","Jagdish P. Sharma","Arunachalam Rajendran"],"dc:creator":["Palikhel, Dinesh Raj"],"dc:date.available":["2019-07-19T07:00:00Z"],"dc:description.abstract":["Injection pultrusion is an efficient and highly automated continuous process for high-quality, low-cost, high-volume manufacturing of composites. The main objective of this study is to analyze \"attached die configuration\" and \"detached die configuration\" for the better injection pultrusion process. In this work the impact of various processing parameters on complete wet out of composite parts is investigated in the attached die and detached die injection pultrusion with various chamber length considerations. The various processing parameters considered are pull speed, fiber volume fraction, resin viscosity, injection port location and compression ratio. 3-D finite volume technique is used to simulate the liquid resin flow through the fiber reinforcement in the injection pultrusion process. The purpose of the present work is to investigate the resin injection pressure needed to achieve complete wet-out, the corresponding maximum pressure inside the resin injection chamber and to predict the resin flow front by varying the length of injection chamber for different processing parameters.
"],"dc:identifier":["https://egrove.olemiss.edu/etd/1328"],"dc:subject":["3 D Finite Volume","Numerical Model","attached die and detached die","injection pressure","maximum chamber wall pressure","Processing parameters","Pull Speed","Fiber Volume Fraction","Viscosity","resin injection pultrusion","Mechanical Engineering"],"dc:title":["Processing parameters and chamber length impact on detached die and attached die resin injection pultrusion"],"thesis:degree_discipline":["Mechanical Engineering"],"thesis:degree_level":["Thesis"],"thesis:degree_name":["M.S. in Engineering Science"]},"updated_at":"2026-07-24T03:06:44Z"}