Influencia de la posición del sensor MQ-6 y el tiempo transcurrido en la detección de concentración de GLP en una fuga doméstica

Gas leaks in Lima and Ica (Peru) increase every year, causing accidents and irreparable damage to the population. In this article, a controlled leak was produced using a two-burner kitchen and an array of MQ-6 sensors positioned at different angles (45°, 0° and 30°) with respect to the kitchen. The results show that, if the kitchen is in a high position (87 cm), the detected concentration is lower, but the detection is faster (6.419 s) if the arrangement is located 50 cm from the origin of the leak. The detection time is between 13,515 s and 21,740 s and the maximum concentration detected is 98 ppm. The best adapted learning model is Suport Vector Machine, with an RMSE of 4,61 ppm. It is concluded that the best position for gas detection was at a height of 47 cm above the ground, at 50 cm from the sensor and at an angle of 0°. The detection time is 13.84 s. Finally, it is concluded that 30 seconds of leakage are not enough to reach the harmfull limit (147 ppm).

Name thesis:degree_name

Ingeniero Industrial

Level thesis:degree_level

Título Profesional

Discipline thesis:degree_discipline

Ingeniería Industrial

Grantor dc:publisher

Universidad de Lima

Year dc:date.issued

2023

Authors dc:creator

• Bueno Vera, Alejandro Ivan
• Luis Ortiz, Gianfranco

Advisor dc:contributor.advisor

• Taquía Gutiérrez, José Antonio

• Sensors
• Liquefied petroleum gas
• Sensores
• Gas licuado de petróleo

Statement dc:rights

• info:eu-repo/semantics/openAccess

Licence dc:rights.uri

• https://creativecommons.org/licenses/by-nc-sa/4.0/

Language dc:language.iso

spa

Handle dc:identifier.uri

https://hdl.handle.net/20.500.12724/19409

OAI identifier oai:identifier

oai:repositorio.ulima.edu.pe:20.500.12724/19409