Validation of Radiocarpal Joint Contact Models Based On Images from a Clinical MRI Scanner
type: CreativeWork
description: Due to the severity and continuing escalation in occurrences of degenerative joint diseases, it is vital to establish a means of detection and prevention that could lead to an improvement in quality of life. One such means is MRI-based modeling for joint contact analysis of in vivo functional loading. The purpose of this study was to validate models generated from a clinical MR scanner for future in vivo joint contact analyses. Models were tested using 3 cadaver forearm specimens and compared with experimental data. It was found that models were validated based on contact area. Direct contact area measurements were observed to be very close to experimental data. Model force measurements were reasonable, but did not agree with experimental data as well as contact area. Peak pressure data from the models were less consistent in correspondence with experimental data. Also, radiocarpal mechanics were investigated to determine the effect of inserting a sensor into the joint space. Magnitudes of bone motions were found to be greater with film inserted than without film. Model results showed contact areas to be higher with film than without film.
abstract: Due to the severity and continuing escalation in occurrences of degenerative joint diseases, it is vital to establish a means of detection and prevention that could lead to an improvement in quality of life. One such means is MRI-based modeling for joint contact analysis of in vivo functional loading. The purpose of this study was to validate models generated from a clinical MR scanner for future in vivo joint contact analyses. Models were tested using 3 cadaver forearm specimens and compared with experimental data. It was found that models were validated based on contact area. Direct contact area measurements were observed to be very close to experimental data. Model force measurements were reasonable, but did not agree with experimental data as well as contact area. Peak pressure data from the models were less consistent in correspondence with experimental data. Also, radiocarpal mechanics were investigated to determine the effect of inserting a sensor into the joint space. Magnitudes of bone motions were found to be greater with film inserted than without film. Model results showed contact areas to be higher with film than without film.
author: Johnson, Joshua E.
language: EN
keywords: Mechanical engineering
date published: 2008-01-01
date modified: 2026-07-24T02:45:07Z
provider: University of Kansas
publisher: Networked Digital Library of Theses and Dissertations
type: WebPage
source organization: University of Kansas

PropertyValue
property ID: Handle
value: http://hdl.handle.net/1808/4366