Measurements of MRI Induced Heating

The appeal of magnetic resonance imaging (MRI) stems from the fact that it can generate internal images of the human body noninvasively, with high temporal and contrast resolution, and without requiring ionizing radiation. Instead, MRI requires the use of a relatively safe radio frequency (RF) signal, which can however be problematic for patients with implantable medical devices. The RF induced heating on twenty-four titanium rods with different diameters, coatings, and lengths, were placed, within a phantom of gelled saline, inside a 1.5 T, 64 MHz test system for 15 minutes, one-by-one. Thermal simulations were carried out in SEMCAD X. The partially insulated rods experienced the highest increase in temperature out of all the coating configurations. Also, the titanium rods that were closer to the length of a half-wavelength dipole antenna in general experienced a higher increase in temperature. Finally, the thinner rods experienced a higher increase in temperature than the thicker rods.

Name thesis:degree_name

Master of Science in Electrical Engineering

Level thesis:degree_level

Masters

Discipline thesis:degree_discipline

Electrical Engineering

Grantor

University of Houston

Year dc:date.issued

2013

Author dc:creator

• Pena, Miguel A. 1987-

Advisor dc:contributor.advisor

• Chen, Ji

Committee members dc:contributor.committeemember

• Jackson, David R.
• Zouridakis, George

• RF-induced heating
• Titanium
• MRI
• MRI induced heating

Statement dc:rights

• The author of this work is the copyright owner. UH Libraries and the Texas Digital Library have their permission to store and provide access to this work. Further transmission, reproduction, or presentation of this work is prohibited except with permission of the author(s).

Language dc:language.iso

eng

Handle dc:identifier.uri

http://hdl.handle.net/10657/1052

OAI identifier oai:identifier

oai:uh-ir.tdl.org:10657/1052