Back to results

Eastern Michigan University

Effect of silicon nano particles added to the polymeric coatings

Abstract

dc:description.abstract

<p>The purpose of this research was to compare mechanical and tribological properties of a coatingto the same coating with added nano silica. The sample coating for this project was bis-ureasil which was synthesized using 1:1 equivalent ratio of bis (3-trimethoxysilyl-propyl) amine (BTMSPA) (318.0g) and IPDI (52.0g) in 400g of anhydrous THF. The other coating was prepared by adding 10% nano silica particles. A scanning probe microscope was used to study the surface morphology of the coating samples, a Raman microscope was used to study the silicon concentration on and underneath the surface of the coating, and nano-indentation was used to compare the mechanical characteristics of the coating samples. Images obtained from the scanning probe microscope indicated no significant difference between surfaces of the two coating samples with and without nano silica, revealing that the added nano silica diffused into the coatings and embedded underneath the surface. A number of silicon peaks observed with Raman microscope suggested that the coating with added nano silica had slightly higher silicon concentration, as expected. The silicon peaks of almost equal heights at different depths for the coating with nano silica indicated that the added nano silica diffused throughout the coating. A number of nano-indentation tests revealed that the coating sample with added nano silica has higher modulus of elasticity and hardness at each depth. The scratch width produced under the same applied force was higher in the coating sample without nano silica. Similarly, the real scratch depth and the residual effect of the forces applied on the coating sample with added nano silica were lower. These observations revealed that the scratch strength of the coating is increased when nano silica particles are added. Thus, added silicon particles strengthen the mechanical and tribological properties of polymeric coatings, enhancing the hardness, elastic modulus and scratch resistance.</p>

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Open Access Thesis
Discipline thesis:degree_discipline
Physics and Astronomy
Year dc:date.available
2024

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Tripathi, Ramesh Chandra
Contributors dc:contributor
  • Weidian Shen, PhD
  • Patrick Koehn, PhD
  • Eric Paradis, PhD

Subjects

dc:subject × 1

Identifiers

dc:identifier.*
Repository record dc:identifier
https://commons.emich.edu/theses/1236
OAI identifier oai:identifier
oai:commons.emich.edu:theses-2610

Chain of custody

source
Harvested from
Eastern Michigan University
Base URL
commons.emich.edu/do/oai/
Last updated
2026-07-24
Source record
OAI-PMH GetRecord
citation

Tripathi, Ramesh Chandra. Effect of silicon nano particles added to the polymeric coatings. Open Access Thesis thesis, 2024. https://commons.emich.edu/theses/1236