Back to results

City University of New York - City College

Void fraction measurements in a large (0.3 m) diameter bubble column using Wire Mesh Sensors and Pressure Transducers: Effect of Spargers

Abstract

dc:description.abstract

<p>The importance of the accurate temporal and spatial measurements of the two-phase flow parameters in bubble columns is very well known. The aim of this research work is to report the spatial measurements of the void fraction distribution in a 30 cm diameter cylindrical bubble column using Wire Mesh Sensor (WMS) tomography and Pressure Transducers. Pair of WMS sensors, with a 64×64 wire configuration of each sensor, were installed which are separated by a distance along the axis of the bubble column. Wire Mesh Sensors and PTs Data were collected for time-averaged and transient with a sampling frequency of 1000 Hz respectively. The principle of Wire-Mesh Sensors (WMS) and algorithms for estimating the void fraction from the WMS raw experimental data have been discussed in great detail. The void fraction results obtained from the WMS are compared against the void fraction results obtained from the Pressure Transducers. Experiments were performed for seven superficial gas velocities, to cover both Homogenous and Heterogenous flows. Two different spargers (point sparger and four arm spargers) were used to study the effect of the sparger design on the hydrodynamics. The measurement uncertainty of the WMS and PTs for air-water two-phase flows is investigated by repeating the experiments. The effect of superficial gas velocity and sparger design on the radial and steady-state void fraction profiles have been reported. These experimental investigations disclose the quantitative measurements of the steady-state flow parameters which have not so far been reported, and this data can also be used by the theoretical CFD modelers for their simulation data validation.</p>

Degree

thesis:*
Name thesis:degree_name
Master of Engineering (M.E.)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical Engineering
Year dc:date.available
2019

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Ojo, Afolabi G
Contributors dc:contributor
  • Masahiro Kawaji

Subjects

dc:subject × 12

Identifiers

dc:identifier.*
Repository record dc:identifier
https://academicworks.cuny.edu/cc_etds_theses/878
OAI identifier oai:identifier
oai:academicworks.cuny.edu:cc_etds_theses-1830

Chain of custody

source
Harvested from
City University of New York - City College
Base URL
academicworks.cuny.edu/do/oai/
Last updated
2026-07-24
Source record
OAI-PMH GetRecord
citation

Ojo, Afolabi G. Void fraction measurements in a large (0.3 m) diameter bubble column using Wire Mesh Sensors and Pressure Transducers: Effect of Spargers. Thesis thesis, 2019. https://academicworks.cuny.edu/cc_etds_theses/878