Back to results

Centre for Materials Engineering

Evaluation of stress corrosion cracking of high-nitrogen Cr-Mn stainless steel

Abstract

dc:description.abstract

The stress corrosion cracking susceptibility of an experimental high nitrogen Cr-Mn stainless steel, known as Cromanite ™, and conventional AISI 304 stainless steel were investigated in order to compare their stress corrosion performance in solutions where AISI 304 stainless steel is known to be susceptible. Slow strain rate tests (SSRT) were performed on solution treated specimens a t30°C in aerated aqueous sodium chloride (NaCI) solution containing hydrochloric acid (HCI) of varying concentration at open circuit potentials. Static tests in the form of bent-beam tests were performed on both solution treated and aged specimens in 3M NaCI solution containing 0.05 M HCI. Potentiodynamic scans and Tafel plots were used to assess corrosion behaviour and corrosion rate respectively, while the electrochemical potentiokinetic reactivation (EPR) method was used to quantify the degree of sensitisation for the materials. The SSRT revealed poor corrosion behaviour of Cromanite TM in the presence of hydrochloric acid. Whilst AISI 304 could be examined for stress corrosion cracking at HCI concentrations up to 0.5 M HCI, Cromanite ™ exhibited corrosion rates which were too fast to permit assessment of stress corrosion susceptibility at HCI concentrations of 0.15 M or above. SCC started in a salt solution containing 0.05M HCI for AISI 304 while Cromanite TM cracked in both salt solution (3M NaCI) and in 0.05 M HCI +3M NaCI. The bent-beam test performed on solution treated specimens revealed no evidence of cracking for both alloys after 100 days of exposure; however, Cromanite ™ suffered substantial mass loss after this period. While aged Cromanite TM suffered intergranular cracking after only 25 days in the test solution, no cracking was observed for the aged AISI 304 after 75 days.

Degree

thesis:*
Grantor dc:publisher.institution
Centre for Materials Engineering
Year dc:date.issued
1997

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Mginqi, Lungile Ngubekhaya
Advisor dc:contributor.advisor
  • Knutsen, Robert D

Rights

Language dc:language.iso
eng

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/11427/17932
OAI identifier oai:identifier
oai:open.uct.ac.za:11427/17932

Chain of custody

source
Harvested from
University of Cape Town
Base URL
open.uct.ac.za/oai/request
Last updated
2026-07-22
Source record
OAI-PMH GetRecord
related terms
citation

Mginqi, Lungile Ngubekhaya. Evaluation of stress corrosion cracking of high-nitrogen Cr-Mn stainless steel. Centre for Materials Engineering, 1997. http://hdl.handle.net/11427/17932