Development of appropriate steam turbine models in Flownex

The Specialization Centre for Energy Efficiency at the University of Cape Town has a goal of building thermo-hydraulic models of an entire power plant. A one-dimensional thermo-hydraulic network solver, Flownex, is the software envisaged to accomplish this goal. The development of appropriate steam turbine models in Flownex supports fulfilment of this goal. Steam turbines of fossil and nuclear power plants make up most of the generating capacity for the majority of industrialised and industrial developing countries, except for those whose power industry depends mainly on hydroelectric power plants [1]. It is therefore a matter of great interest to be ab le to predict the steady state and transient operation of steam turbines. The aim of this dissertation was to use minimal data that was readily available to the end user to develop accurate models. Acceptance test data was used as the primary source because it is more reliable than plant data. Various pressure drop correlations and methods to predict off-design efficiency were investigated. These correlations and methods were solved analytically and implemented in Flownex. Interpretation of the error analysis for the pressure drop correlations established that the general empirical law using inlet conditions and Stodola law in the volume form were the most accurate and consistent in predicting mass flow rate and pressure. The Ray method was shown to be the most accurate to predict off-design efficiency and one of the less complicated to implement. Steady state models were built for four turbine trains using the general empirical and Stodola laws. The results produced by both correlations were similar, showing that for high vacuum conditions either correlation could be used. The general empirical law was the chosen correlation to implement for transient analysis since it was generally more accurate and easier to implement than Stodola. The power predicted by the model was within ±1 % of that of the actual power produced.

Grantor dc:publisher.institution

Department of Mechanical Engineering

Year dc:date.issued

2014

Author dc:creator

• Neerputh, Rahendra Laljith

Advisor dc:contributor.advisor

• Fuls, W F

Language dc:language.iso

eng

Handle dc:identifier.uri

http://hdl.handle.net/11427/13158

OAI identifier oai:identifier

oai:open.uct.ac.za:11427/13158